![]() |
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
||||||
| Power Adders Technical discussions for forced induction with nitrous and blowers. |
![]() |
|
|
Thread Tools | Display Modes |
|
|
#1 (permalink) |
|
Junior Member
|
Hello,
I have a 2004 Ford Mustang GT, my car is a complete Saleen Clone. the only thing it is missing is the Blower. what kind of blowers will fit my car. what about a stock 2004 Cobra supercharger? will that fit? what kind of mods do i have to do in order for superchargers to work on my car? thanks for all the help. |
|
|
|
|
|
#2 (permalink) |
|
WE ARE PENNSTATE
|
anything that is specifically meant for an 01-04 mustang gt..alot of people go w/ vortec v2-sq trim, a paxton novi 2000, procharger psc1, and Kenne Bell 2.1 big bore (which replaced the 1.7 version). kenne bell is the only positive displacement of the 4 i meantioned (it sits on top of the engine and replaces your intake). You cannot use a 2003/2004 supercharger cause it is meant for a 4v head and not the 2v head which is what the gt has.
if you want a nice complete kit get a Modular Powerhouse Mongoose kit w/ a Vortec, Novi 2000 (i believe), or Kenne Bell 2.1 (for this supercharger you need to go to the shop which is in GA). Mogoose kits come w/ everything (fuel pump, injectors, Xcal2 tuner w/ safe tune, Spark Plugs) the only thing you would need is a dyno run to check the air/fuel ratio. 400rwhp and 400rwtq is the max on the stock internals until you put in forged parts (rods, crank and pistons). after that point you may wanna have another car to drive http://www.modularpowerhouse.com/ind...75f098b7851a2f they have a forum there too...the owner is Tim and then there is Rhonda (wife) and Andy (brother)...ask anyone of them w/ even further help http://www.modularpowerhouse.com/forums
__________________
Brandon J My Ride
![]() sig by purestang |
|
|
|
|
|
#3 (permalink) |
|
Shnosberries
Join Date: Aug 2005
Posts: 287
|
Nope. If you want to go the Saleen route Id frequent ebay. One sold last week for around $3k. Id recommend a Kenne Bell if you want the best of the best though. Buy the KB kit new and it will have everything you need to install it and perform great
|
|
|
|
|
|
#5 (permalink) |
|
Whats that Whining Noise?
|
Cant go wrong with either one.
__________________
04 DSG Blown GT/ 5 Speed 1.7L KB Blower, Headers, 4.10 Gears, etc... 397 RWHP & 407 RWTQ @ 9 PSI Tuned by Steen Racing
|
|
|
|
|
|
#6 (permalink) |
|
Always Detailin'
|
I'm close to a Saleen clone, but not totally.
Anyways, if you want to complete your clone with saleen, definately check Ebay. There's a few models: Saleen Series II which can only hold to about 12 psi and 380RWHP MAX with a lot of supporting mods. This is an Eaton blower. Eaton is also the Cobra blowers. Also, there is the series IV which I'd recommend if you want a Saleen blower. This one is made by Whipple and can stand up to around 14-16 PSI. Up another notch is the Series V which is discontinued and rare. Went on the Extreme's from 02-04 and therefore isn't many of them. If you can find them they'll run you around $7K. If you still want similar to the Saleen blower's, go with Kenne Bell. GREAT blower, but rather expensive. I believe $5-6,000 but is the best supercharger out there. This is still a positive displacement blower also. If you want centrifugal, do your research and pick from Vortech, Paxton, or ProCharger. These are more personal preference. Here's a link for the Series IV: http://www.haneymotorsport.com/1999-...percharger.htm |
|
|
|
|
|
#7 (permalink) |
|
Super Moderator
|
Keep in mind with the KB, if you buy it new then itll have to be installed by the shop you buy it from. This will add a lot onto the costs.
|
|
|
|
|
|
#8 (permalink) |
|
Wowbagger hates me too!
Join Date: Nov 2005
Location: Magrathea/California
Posts: 7,022
|
keep the saleen thing going and get the saleen series 4. It's a twin screw like the whipple and KB but it says saleen on top.
in centrifugal land... I like the vortech kits. They've always been a great blower and easy folks to deal with. |
|
|
|
|
|
#9 (permalink) |
|
WE ARE PENNSTATE
|
[quote=r3dn3ck;227798]keep the saleen thing going and get the saleen series 4. It's a twin screw like the whipple and KB but it says saleen on top.
the series 4 is a whipple hah
__________________
Brandon J My Ride
![]() sig by purestang |
|
|
|
|
|
#10 (permalink) |
|
Wowbagger hates me too!
Join Date: Nov 2005
Location: Magrathea/California
Posts: 7,022
|
and the KB is an autorotor. Your point?
|
|
|
|
|
|
#11 (permalink) |
|
Junior Member
Join Date: Nov 2006
Location: Pennsylvania
Posts: 7
|
If your looking for a good supercharger i'd go with the vortech supercharger you can find a kit at www. jmschip.com
The JMS Velocity Supercharger Kit includes: Vortech V2-SQ S-Trim Tuner Kit 60lb Siemens/Deka Fuel Injector Set SVT Focus Fuel Pump Assembly SCT BA-2400 90mm Big Air MAF Meter JMS Custom Tuned SCT XCalibrator 2 with 3 Custom Programs (UNLIKE OTHER COMPANIES WHO CHARGE EXTRA FOR THE TUNES) and User Adjustable Features! NGK TR6 Spark Plugs New IAT Wiring Harness Extension New IAT Grommet New IAT Sensor |
|
|
|
|
|
#12 (permalink) |
|
Super Moderator
|
Im not sure how I like that package. Whats with the 60lb injectors then focus pump? 60lbs are good to about 600rwhp. A focus pump is only good to around 400rwhp. Id also go with NGK BR7EF gapped around .028 in blower cars.
I like the miles per hour packages a lot better. |
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Richard Simmons steamer | foncarelli | Videos | 3 | 12-09-2006 09:15 AM |
| cobra | GREG@94GT | Pictures | 20 | 03-01-2006 07:13 AM |
| I'm getting the hang of it | cobra1923 | Pictures | 3 | 01-24-2006 01:45 PM |
| Fuel and Air upgrades | Raging Stallion | Modular 4.6L Tech | 3 | 03-27-2005 08:33 PM |
| What kind of wax does everyone here use? | MainstreamStang | The Lounge | 20 | 10-07-2004 02:42 PM |