Nx wet kit

silverstang04 · 11-01-2006, 07:42 PM

I have an Nx wet kit for my 04 GT. I was thinking about tring to install this kit with help from a couple of guys that know alil bit and some directions what do u guys think. Of course I will have her tuned before I spray and will more than likely find some sort of oil seperator to install @ the same time. Ur opinions are welcome.

littledonko · 11-02-2006, 03:15 AM

I wish you the best of luck.

spike_africa · 11-02-2006, 06:39 AM

If you can run some lines, mount a bottle and nitrous solinoids and do basic wiring you can do it. Its really not that hard. My install took 4 hours if i remember correctly.

silverstang04 · 11-02-2006, 03:42 PM

Cool thanx fellas, I got to guys that are willing to help that do this all the time.

11-01-2006, 07:42 PM	#1 (permalink)
silverstang04 DTP Join Date: Jul 2006 Location: Plano Posts: 290	Nx wet kit I have an Nx wet kit for my 04 GT. I was thinking about tring to install this kit with help from a couple of guys that know alil bit and some directions what do u guys think. Of course I will have her tuned before I spray and will more than likely find some sort of oil seperator to install @ the same time. Ur opinions are welcome. __________________ Intercooled Procharger p-1sc-2,Steeda tri ax short shifter, steeda caster camber plates,Black Fr500's,255 40 17x9's front, 315 30 18x10's back, SCT2 tuner,BBK cold air, BBK 75mm T/B Plenum Combo,Mac o/r x pipe, flow master 50's, HPM Mega Bite jr lower control arms, Eibach sport line springs, KYB struts,KYB 8 way shocks in rear. FRPP 3.73's,FRPP Aluminum Drive shaft, [/center]

11-02-2006, 03:15 AM	#2 (permalink)
littledonko Member Join Date: Feb 2006 Location: Central WI Posts: 65	I wish you the best of luck. __________________ 2004 Mustang GT Premium - Competition Orange - SLP Ceramic LT Headers - Magnaflow Magnapack Catback - SLP Catted X - Steeda Tri-ax - H&R Super Sports - FRPP 4.10's - Diablosport Predator - 315 Sumi HTR-Z's

11-02-2006, 06:39 AM	#3 (permalink)
spike_africa Administrator Join Date: Sep 2004 Location: Orlando,Florida Posts: 7,213	If you can run some lines, mount a bottle and nitrous solinoids and do basic wiring you can do it. Its really not that hard. My install took 4 hours if i remember correctly. __________________ Dustin 2002 GT Mustang 5-Speed Drag Radials,Sprayed,Powershifted WOOO HOOOO!

11-02-2006, 03:42 PM	#4 (permalink)
silverstang04 DTP Join Date: Jul 2006 Location: Plano Posts: 290	Cool thanx fellas, I got to guys that are willing to help that do this all the time. __________________ Intercooled Procharger p-1sc-2,Steeda tri ax short shifter, steeda caster camber plates,Black Fr500's,255 40 17x9's front, 315 30 18x10's back, SCT2 tuner,BBK cold air, BBK 75mm T/B Plenum Combo,Mac o/r x pipe, flow master 50's, HPM Mega Bite jr lower control arms, Eibach sport line springs, KYB struts,KYB 8 way shocks in rear. FRPP 3.73's,FRPP Aluminum Drive shaft, [/center]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode