Dyno.
#1
Dyno.
Well we spent several hours playing with the dynojet. Here's the only pic that you can see, it's from a camera phone so it's so-so. Took one of the screen but unable to really see. I'll scan the sheet later. Have to use one at the station.
1st run 9:30am 74deg-359.3hp/362fttq, torque peak@ 3850rpm. and very flat,stock tune.
2nd run 10:15 80deg-added timing leaned the upper rpm, and adjusted the boost to only decrease under higher intake temp readings. 382.6hp/396fttq-peak torque moved down to around 3600.
Intake temps run to 155deg, so we let it cool down. Also the fan blowing air into the engine simulates 55mph or so, would show more hp on the street, so I was told.
4th run (best) around 1pm, 95deg, humid as hell, 389hp/401fttq peak torque was now around 34-3500 rpm, and very flat up to, looks like about mid/upper 5ks. Cut off for all was 5850.
I have the ford tune, for backup, and one street tune now. Intake got as high as 170deg. Water injection would allow more boost and more power but @ 400hp/400ft, I'm happy. Who ever said the temp would play a big factor was right. Still have an invalid file error message when uploading from camera, Bestbuy said it was due to the fact the comp is running Windows ME. The file ext is confused? I can see it just fine.
1st run 9:30am 74deg-359.3hp/362fttq, torque peak@ 3850rpm. and very flat,stock tune.
2nd run 10:15 80deg-added timing leaned the upper rpm, and adjusted the boost to only decrease under higher intake temp readings. 382.6hp/396fttq-peak torque moved down to around 3600.
Intake temps run to 155deg, so we let it cool down. Also the fan blowing air into the engine simulates 55mph or so, would show more hp on the street, so I was told.
4th run (best) around 1pm, 95deg, humid as hell, 389hp/401fttq peak torque was now around 34-3500 rpm, and very flat up to, looks like about mid/upper 5ks. Cut off for all was 5850.
I have the ford tune, for backup, and one street tune now. Intake got as high as 170deg. Water injection would allow more boost and more power but @ 400hp/400ft, I'm happy. Who ever said the temp would play a big factor was right. Still have an invalid file error message when uploading from camera, Bestbuy said it was due to the fact the comp is running Windows ME. The file ext is confused? I can see it just fine.
#4
hey froster...those numbers look great!!!! what all did you get to complete the set up..i.e injectors, fuel pump,etc...how much did it cost u total for parts?
i may go this way instead of KB if its proven more
i may go this way instead of KB if its proven more
#7
10psi boost, 3 core intercooler w/ P-1SC-2 kit, 42lb injectors, Diablo MAFia, 373 gears, Accufab 75mm TB and Plenum, Catback's, stock chip - custom tuned by a local shop. I have the dyno sheet... I'll photo it or scan it if interested.
Thread
Thread Starter
Forum
Replies
Last Post