front end pop

cobra4123 · 06-20-2005, 01:23 PM

the front pops when the car is needed to be stopped quickly open to ideas...

*4.6 Love* · 06-20-2005, 01:43 PM

Have you checked your brakes?

cobra4123 · 06-20-2005, 01:53 PM

we replaced the pads. already did the motor mounts 2. probally gonna re check the brakes this weekend just lookin for other ideas to check out

mike sweeney · 06-20-2005, 08:50 PM

check the lower control arm bushings. I see you have an Energy suspension kit. Did the kit include stiffer front lower control arm bushings?? Sometimes stiffer bushings can cause creaks and thumps under load. check for proper torque on the lower control arm bolts. If they are ok check the caliper bracket bolts for proper torque?

Scott · 06-21-2005, 05:45 AM

Check you C/C plates at the top of your strut.

cobra4123 · 06-21-2005, 05:58 AM

yea we changed the control arm bushings. i'll check the torque on the bolts. and as far as the cc plates i just got them yesterday at 5

06-20-2005, 01:23 PM	#1 (permalink)
cobra4123 Senior Member Join Date: Apr 2005 Location: Louisville, KY Posts: 826	front end pop the front pops when the car is needed to be stopped quickly open to ideas... __________________ Vote for SkylerSVT on Stangette.com...... Just do it........... http://www.mustangtuningforums.com/s...ead.php?t=6045

06-20-2005, 01:43 PM	#2 (permalink)
4.6 Love Super Moderator Join Date: Sep 2004 Location: Mexico Posts: 6,179	Have you checked your brakes? __________________ Go Cowboys! X pipe and flows

06-20-2005, 01:53 PM	#3 (permalink)
cobra4123 Senior Member Join Date: Apr 2005 Location: Louisville, KY Posts: 826	we replaced the pads. already did the motor mounts 2. probally gonna re check the brakes this weekend just lookin for other ideas to check out __________________ Vote for SkylerSVT on Stangette.com...... Just do it........... http://www.mustangtuningforums.com/s...ead.php?t=6045

06-20-2005, 08:50 PM	#4 (permalink)
mike sweeney Senior Gear Banger Join Date: Sep 2004 Location: Two Harbors, MN. Posts: 230	check the lower control arm bushings. I see you have an Energy suspension kit. Did the kit include stiffer front lower control arm bushings?? Sometimes stiffer bushings can cause creaks and thumps under load. check for proper torque on the lower control arm bolts. If they are ok check the caliper bracket bolts for proper torque? __________________ 2004 Torch Red GT Flowmaster Am.Thunder cat back, SLP Mid Pipe Steeda Underdrive pulleys 3.73 gears Diablosport Predator tune Grille Delete and Mach 1 spoiler Rear Wing delete Mustang Tuning Shifter Bullitt Handling Kit

06-21-2005, 05:45 AM	#5 (permalink)
Scott Member Join Date: Jun 2005 Location: Northern Maryland Posts: 61	Check you C/C plates at the top of your strut. __________________ 04 Torch Red GT Premium with Mach 1000 SLP Loudmouth II, SLP Catted X Pipe, Steeda Tri-Ax and FRPP C Springs more to come

06-21-2005, 05:58 AM	#6 (permalink)
cobra4123 Senior Member Join Date: Apr 2005 Location: Louisville, KY Posts: 826	yea we changed the control arm bushings. i'll check the torque on the bolts. and as far as the cc plates i just got them yesterday at 5 __________________ Vote for SkylerSVT on Stangette.com...... Just do it........... http://www.mustangtuningforums.com/s...ead.php?t=6045

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Will these fit...	Boomdaddy	AmericanMuscle	7	04-07-2006 11:37 AM
me on the dyno being slow	csledd	Videos	14	03-26-2006 05:26 PM
Steeda Underdrive pullies	saleen50	Modular 4.6L Tech	2	12-15-2005 06:10 PM
a big question	stang00	V6 Tech Forums	8	10-16-2005 08:13 PM
store hours?	stanger00	Forum Feedback and Suggestions	2	02-26-2005 05:30 PM