Roushcharger install has started
 

Here is pics of Install my son and are doing. Basically first steps is modifying, moving wires to new locations, reworking airbox. heater hoses, modify alternator
Second step is preassembly on the parts in kit. Kit was well labeld and instructions are clear. The next step which we are at is installing. Will post new pics as we go along

[IMG]http://i29.photobucket.com/albums/c2...project025.jpg[/IMG]

Attachment 28352



Attachment 28353

Attachment 28354

a few more

Attachment 28348

Attachment 28349

Attachment 28350


Attachment 28351

sweet! lookin good, im excited to see some videos of that beast once you get it running

Roushcharger uses CMRC deletes...interesting.

I'm so totally sporting wood right now... hahhah mooey bwaynoh. :)

Rock On Dude!!!!!!!!!!!!!!!!!!

sickk ass car

Sweet... :)

Cmrc deletes ??? don't know what you mean The one pic is of the old intake

CPU back from roush today I was suprised it is here already since I had sent on Friday the 23 december with xmas in between. They have there sticker on it so it must have made it there.

Attachment 28347

Damn man, how long are you expecting it to take?

O duh...that is the old intake, I couldnt see the valves on those CMRC's (Charge motion runner controls). Does the new intake have any butterfly valves on those runners?

Well the last day of 05 and we started of by mounting the water tank for intercooler
Attachment 28338

Then we jacked up car took off front wheels to be able to remove front half of inner fenders and the front bumper. Actually remove the front of the car was probably the easiest thing we have done. This is to install the cooler for intercooler.

Attachment 28339


Attachment 28340


Attachment 28341

We now installed the cooler and I must say the way it was built was like it came right from ford themselves it was perfect fit. We removed the crush beam
(styrofoam lol)from the front . Removed the 2 inside bumper bolts. this is where the cooler mounts. We then installed the 2 supllied hoses to the engine compartment on paseenger side the other to the drivers side fender area. this is where the water pump for inter cooler goes. On the pump side we had to cut a few inches of hose off at a time to get the kinks out of the hose.

[Attachment 28334


Attachment 28335

Attachment 28336



Attachment 28337

Next we installed the supplied cooler autolite spark plugs. the order They do things in the instructions seem to make things easier to do. Like the spark plugs we be a little tight with everything on to change.

Attachment 28330


Attachment 28331


we then reinstalled the cooler lines we haad to modify into water pump under intake. Remove tape and clean the surface area to insatl the intake


Attachment 28332


Attachment 28333

Now we are getting to the best stuff so far. The intake goes on !!!!!!!!!!!. You can see intercooler in mainfold hole where s/c will sit


Attachment 28328


Attachment 28329

Then the s/c goes on!!!!! Now it is starting to look totally awsome now!!!!!!!


Attachment 28324


Attachment 28325

Attachment 28326


Then we installed the new fuel injectors and fuel rails. Notice how the crosover tube goes over the s/c

Attachment 28327

NICE!! it's coming along really well.. when do you plan to finish?

We now had to mount the new alternator bracket. It is of high quality aluminum and it mounted on the 2 studs from the old location. It Looked like a factory piece high quality when installed. .We the installed a couple of idler pulleys and installed the new belt. Just one belt drives everthing. Belt was alost as tall as me. Definetly the page that shows where the belt goes is a must keeper in car in case you ever have to replace or remove belt. Even with the instructions it was a maze lol.



Attachment 28320



Attachment 28321


Attachment 28322



Attachment 28323

We then installed the throttle spacer and the throttle body

Attachment 28317


Attachment 28318


Attachment 28319

Lookin good.

that's probably the funniest thing i have ever heard!!!!!!!!!!!!!

I'm gunna start using that....
By the way..that SC is crazy!!! love it man...gotta post vids

Wat fuel injectors did they send you?? How many lbs.??

Well we worked on a few last dtails today. We finished installing the air induction sytem and the modifird airbox. The air iinduction is well secured with brackets to mainfold


Attachment 28297

Attachment 28298


Attachment 28299

Attachment 28300

next we had to do some mods to the battery tray.This is to be able to mount the bypass solenoid and vacum resevoir. It is held onto battery tray with zip tyes.

Attachment 28294

Attachment 28295

Attachment 28296

looking dayum good when u getting it tuned and things

We then installed the new pvc purge supplied in kit and the s/c bypas vac harness Then we put the pcm back in

Attachment 28292


Attachment 28293

We then installed the CMVC replicatror box. This device replicate those valves in the old intake system you seen earlier on. Basically fooling the p pcm to think it is still there

Attachment 28289


[IMG]http://i29.photobucket.com/albums/c259/toolttime/superchargerproject202.jp
g[/IMG]


We then installed the electric pump that circulates the water for intercooler. t mountes in the wheel well on the frame inon drivers side.

Attachment 28290


Attachment 28291

We we hooked up the battery put antifreeze back in and ------- ta da she do she's done

Attachment 28288

dayum that **** looks real sick i cant wait to hear the numbers you throw down and how she drives