General Tech Forum Use this form for tech related topics that relate to all/most Mustang platforms
Sponsored by:
Sponsored by:

ccrm

Thread Tools
 
Search this Thread
 
  #1  
Old 07-30-2008, 08:55 PM
sand1303's Avatar
Senior Member
Thread Starter
Join Date: May 2008
Location: Austin, TX
Posts: 965
Default ccrm

i posted this same question in the v6 section but got no response so i will give it a try here. does the ccrm control the a/c compressor as well as the electric fan? i recently got my hands on a 96 v6 that we replaced a busted intake manifold gasket on and the electric fan does not seem to want to turn on unless my defrost is turned on or the a/c is on. now the a/c locked up before i got it so we pulled a compressor from the junkyard and as soon as we charged it up a/c worked for about two weeks. so then i had no a/c and bought a remanufactured compressor and worked for a shorter period of time. could the ccrm be causing both problems or just the fan problem?
 
  #2  
Old 07-31-2008, 06:28 AM
Randy Stinchcomb's Avatar
Super Moderator
Join Date: Aug 2005
Location: Randallstown, Md
Posts: 2,931
Default

the CCRM is a 4 function relay the provides power for the PCM, A/C clutch, Coolant Fan Mtr and Fuel Pump...so the answer to your question is "yes"....
 
  #3  
Old 07-31-2008, 06:16 PM
sand1303's Avatar
Senior Member
Thread Starter
Join Date: May 2008
Location: Austin, TX
Posts: 965
Default

ok, thanks i did not realize it controlled all that. that will be the next thing i replace. thanks for the reply!! this car is the first car i've owned with a complicated relay module, or at least one that has given me any problems. all the other vehicles ive had just had the regular square relays. i went to autozone and told them i needed a electric fan relay and they sold me a 6$ square relay for no reason because when i looked in the owners manual there were no simple relays for that.
 

Last edited by sand1303; 07-31-2008 at 06:19 PM.
  #4  
Old 08-01-2008, 07:20 PM
TUFF 4.6's Avatar
"Just Add Foot"
Join Date: Dec 2007
Location: Richmond Va.
Posts: 2,250
Default

He aint pretty but he knows his ****. Thats why we keep him around
 
  #5  
Old 08-24-2008, 09:45 AM
sand1303's Avatar
Senior Member
Thread Starter
Join Date: May 2008
Location: Austin, TX
Posts: 965
Default

anyone ever taken one of these out? can not seem to get the connector to seperate no matter how i try. tried pulling tried flat head screwdriver and all i have done was crack and damage the plastic around the connector. the little clips up top by the wiring only seem to secure the wires i did not want to pull too hard on the wiring from top and end up damaging the connector.

i thought the connection was where i put the arrow but could not get it loose.
 
Attached Thumbnails ccrm-hpim090625.jpg  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sand1303
V6 Tech Forums
0
07-28-2008 06:18 PM



Quick Reply: ccrm



All times are GMT -7. The time now is 05:11 AM.