which wire do i tap into??????
#1
which wire do i tap into??????
for the signal wire on my A/F ratio gauge. i had a link saved a long time ago that had which wire on the computer but i must have deleted it. can anyone :helpsmili me?
thanks in advance
thanks in advance
#4
found it
Air/Fuel Ratio – Oxygen Sensor Gauge Installation
for 4.6 engine(s)
Pin # 60 at PCM which is a gray wire with a light blue stripe or pin # 87 which is a red wire with a black stripe. Either will work.
Air/Fuel Ratio – Oxygen Sensor Gauge Installation
for 4.6 engine(s)
Pin # 60 at PCM which is a gray wire with a light blue stripe or pin # 87 which is a red wire with a black stripe. Either will work.
#5
FWIW.. I couldn't get conveniently to the #60 wire. The #87 was not much easier but I managed to get to it.
People will probably start baggin on you for having an AF guage. Yes they sit there an bounce from end to end under part throttle but under WOT they give you a really good idea of rich or lean. I love mine. It's accurate enough and has great bling value.
People will probably start baggin on you for having an AF guage. Yes they sit there an bounce from end to end under part throttle but under WOT they give you a really good idea of rich or lean. I love mine. It's accurate enough and has great bling value.
#6
Originally Posted by r3dn3ck
FWIW.. I couldn't get conveniently to the #60 wire. The #87 was not much easier but I managed to get to it.
People will probably start baggin on you for having an AF guage. Yes they sit there an bounce from end to end under part throttle but under WOT they give you a really good idea of rich or lean. I love mine. It's accurate enough and has great bling value.
People will probably start baggin on you for having an AF guage. Yes they sit there an bounce from end to end under part throttle but under WOT they give you a really good idea of rich or lean. I love mine. It's accurate enough and has great bling value.
Thread
Thread Starter
Forum
Replies
Last Post