nope its planned for this springi only need 400 more and i can get it plus when u ship them back all the stock parts you take off you get some money back so 400 more and ill have the kit but i wont install it until around march i think
|
hell i went ahead and ordered that rear saleen piece... look at you MT guys, look what you're doing to me, all my well-saved money into my car.... oh the humanity!! oh this is horrible!! first the lights and then the rear piece... back that piece up, back it up!! :banana:
|
Yep we are bad people :)
|
Most people here on mustangboards are more about performance, but im all about looks so that rear is gonna make your car soo much better :punk: .
|
Are there any more sixers?
|
i'm more an apperance guy myself... i mean... look at the rear..
http://img351.imageshack.us/img351/7219/cars0259pr.jpg stang00 had me thinking man... it looks good but it could look better with the full kit :punk: |
I'd do wheel's first.
|
thats my birthday/graduation gift... what i'm doing now is what only I can afford... such as a rear piece and headlights, tints you know... i'm not to worried about the wheels
|
lance loves v6's so much he just cant stay out of are forum ;) .
|
plus the whole V6 thing sounds better... I mean like... "six-gun.." you know?
You can go around saying "yeah you know, me and my six-gun buried jeff's Z24..." |
Originally Posted by 95bstallion
lance loves v6's so much he just cant stay out of are forum ;) .
|
ah hahha rofl
|
I'm scared now ::p . Actually my name is devin so you dont have to use 95bstallion
|
word yo :devil2:
|
Also if you look in my Sig I do have a 06 V6 too.
|
but its an ugly unmodded 05 that your wife drives am i wrong??????
|
Your right.Unmodded :( But just give me time :)
|
:beerchug: :clap:
|
Originally Posted by 95bstallion
Did you sand anything before painting?
|
in october, i hit a puddle right when first and second gears were shifting, swerved out into the opposite lane, nailed the front end of the saleen kit into the curb, cracked the thing 4 inches up from the bottom of the piece (it's fiberglass..)
i had to resin coat it, ect blah blah but, BUT, the point of that story is, you use a heavier grit paper (lower numbers) to get bulk stuff off, and then you gradually use finer and finer paper until its so smooth it blends right with the original coat and clear coat, get it as fine as the stock coat is... and then sand it even more just in case, then seal, and repaint... never know what hit me :shifty: but in case you're wondering, for the repaint I did a 50 grit, then a 100 grit, then a 150 grit, and finished with a 220 grit sand... http://img524.imageshack.us/img524/3637/hit1ov.jpg |
I've been lurking around for a while with my V6.
2002 Sonic Blue 3.8L V6 I started with wheels first (2004 Cobra SVT w/Stock F1's), then within 2 weeks I had Eibach Proline Springs put on. Next came Window Tint. SHortly afterwards I covered the stock fabric seats with Charcoal Katzskin Leather. Next I did a few MT cheap accessory mods: Grille Delete Chin Spoiler Licenese Plate Frame Black Shorty Antenna.. Most recently I have tapped into the stock MachMP3 system with an Alpine Amp and 2 Infinity Reference Series 10" Subs. DiabloSport Predator Tune, and a K&N Repalcement Air Filter. I love my Mustang. With what little I've done (less than $4K total), I've took a nice little stock V6 car and made it very fun to drive. The small performance tweaks combined with Tires and Springs make it handle twisty roads like a champ, and the leather, tint, and sound package make it feel 100% more sporty behind the wheel. It's not a GT, no... but It's a light, fun to drive, easy on the eyes car that I get compliments on everytime I go somewhere in it. I'll probably get a 06GT a few years down the road and keep this V6 in the stable, but until then, I'm going to enjoy the Sixer! :beerchug: |
Originally Posted by Lances03GT
Your right.Unmodded :( But just give me time :)
Also that paint needs a surface to bond too so sanding is neccessary id also use a primer to if it was me then sand that down, but it is your project. |
Originally Posted by tennstang
I've been lurking around for a while with my V6.
2002 Sonic Blue 3.8L V6 I started with wheels first (2004 Cobra SVT w/Stock F1's), then within 2 weeks I had Eibach Proline Springs put on. Next came Window Tint. SHortly afterwards I covered the stock fabric seats with Charcoal Katzskin Leather. Next I did a few MT cheap accessory mods: Grille Delete Chin Spoiler Licenese Plate Frame Black Shorty Antenna.. Most recently I have tapped into the stock MachMP3 system with an Alpine Amp and 2 Infinity Reference Series 10" Subs. DiabloSport Predator Tune, and a K&N Repalcement Air Filter. I love my Mustang. With what little I've done (less than $4K total), I've took a nice little stock V6 car and made it very fun to drive. The small performance tweaks combined with Tires and Springs make it handle twisty roads like a champ, and the leather, tint, and sound package make it feel 100% more sporty behind the wheel. It's not a GT, no... but It's a light, fun to drive, easy on the eyes car that I get compliments on everytime I go somewhere in it. I'll probably get a 06GT a few years down the road and keep this V6 in the stable, but until then, I'm going to enjoy the Sixer! :beerchug: I look at it this way, your not guna pick up a girl flyin by, but if you set her in cruise and look damn good doing it... it's ON! |
Originally Posted by Grimmz
I look at it this way, your not guna pick up a girl flyin by, but if you set her in cruise and look damn good doing it... it's ON!
This is how i feel exactly i dont like loud exhaust, i just cruise at the speedlimit and accelerate real slow. My car might look rice :sleeping:, but when i roll into the local town it sure does turn alot of heads and i get respect for not tearing the streets aparts and miss treating my baby ;) |
Well I am married so I don't have to worry about picking up a girl so I can drive by fast but I do plan on getting another stang once I get back to the states I will be picking up an 03 Cobra
|
I think im gettin MAC exhuast, h&r lowering sport springs, shorty black antenna,
Thats about it for now maybe a new chip programmer for my bday in may but anything else might just be looks. |
well guys i am happy to say that in the past few days things have came togeather quite well... first off...
i got my Black Saleen rims 18x9 in the front and 18x10 in the back.. now i gotta buy tires.. i dont got much money so i think i am gonna go with Sumitomo tires like 275/40/18 back and 245/35/18 front... we will see. also i got my tail light tint in, and waiting to install that. then i ended up getting black projector lights... there getting installed now. i also got my front Saleen bumper, its getting installed with the lights... ill make sure to take lots of pictures when i get my car back... the next big thing i got planned to do is the exhuast setup... problly wont start on that though till.... next month... :( then once i get the exhuast done ill finish the rest of the Saleen kit... then ill be done with exterior mods and move on to adding some minor HP here and there... p.s. i also decided to go with the 3 piece Saleen wing soon :) i LOVE the way the 3 piece looks... (right now i am wingless and liking it) |
Go with 265's and 285's trust me on this.
|
Originally Posted by Jason24
well guys i am happy to say that in the past few days things have came togeather quite well... first off...
i got my Black Saleen rims 18x9 in the front and 18x10 in the back.. now i gotta buy tires.. i dont got much money so i think i am gonna go with Sumitomo tires like 275/40/18 back and 245/35/18 front... we will see. also i got my tail light tint in, and waiting to install that. then i ended up getting black projector lights... there getting installed now. i also got my front Saleen bumper, its getting installed with the lights... ill make sure to take lots of pictures when i get my car back... the next big thing i got planned to do is the exhuast setup... problly wont start on that though till.... next month... :( then once i get the exhuast done ill finish the rest of the Saleen kit... then ill be done with exterior mods and move on to adding some minor HP here and there... p.s. i also decided to go with the 3 piece Saleen wing soon :) i LOVE the way the 3 piece looks... (right now i am wingless and liking it) Anxious to see your pics! :beerchug: |
Originally Posted by Lances03GT
Go with 265's and 285's trust me on this.
|
Originally Posted by Lances03GT
The 245/35/18's will be like rubber band's!!!!!!
the 265's are more money... :( i think i gotta save for a bit i guess... |
You will be glad you did.
|
Originally Posted by Lances03GT
You will be glad you did.
Glad to see your stang is coming along, i wana see pix of the projectors, I been toying with the idea of gettin them now, but for now I'm tryin to figure out which short shifter to get.... |
Originally Posted by Grimmz
Yo do you go to Iowa? My best friend is goin out there...please BEAT FLORIDA...OMG I HATE GATORS! Lol...
As for me - Side Exhaust (today hopefully) - Lowering Springs - Rear Tailight Tint - Shelby Racing stripes - Strut bar painted and installed (Hopefully it fits had some fitment problems) - Possible Short Throw, depends how much money is left** The Side Exhaust is installed, tint is on, Racing Stripes are on the back burner now, I gave the strut bar to my friend with a white GT cuz it didn't fit my car, and I'm selling my taillights, maybe they will go towards a set of Front Projector lights... But as for right now the Short Throw shifter is def. guna be my next mod, along with a shorter clutch quadrant... |
Originally Posted by Grimmz
So a couple things have changed...
The Side Exhaust is installed, tint is on, Racing Stripes are on the back burner now, I gave the strut bar to my friend with a white GT cuz it didn't fit my car, and I'm selling my taillights, maybe they will go towards a set of Front Projector lights... But as for right now the Short Throw shifter is def. guna be my next mod, along with a shorter clutch quadrant... hey if your gonna get projectors check out this place http://www.k2motor.com/9904.html they are cheaper then Mustangtuning.com and they are good quality... thats where i got mine... plus free shipping :) |
Milos
be careful the "chick" might leave a dent in the hood..... i am referring to his page three post and pic!!!! |
Originally Posted by TEXASPAUL
Milos
be careful the "chick" might leave a dent in the hood..... i am referring to his page three post and pic!!!! hahahahaha sorry bro but that crap is hilarious!!! :banana: :loser: |
Originally Posted by Jason24
hahahahaha sorry bro but that crap is hilarious!!! :banana: :loser:
|
Originally Posted by 95bstallion
thats harsh guys.
i was just laughing.. i didnt dare make the joke. |
Originally Posted by Jason24
hey if your gonna get projectors check out this place
http://www.k2motor.com/9904.html they are cheaper then Mustangtuning.com and they are good quality... thats where i got mine... plus free shipping :) |
All times are GMT -7. The time now is 04:09 PM. |
© 2024 MH Sub I, LLC dba Internet Brands