miss fire and white smoke
 

My high milage 1994 mustang v6 started misissing and blowing white smoke. I took it to my machanic After paying $100 or so I was told I had a blown head gaskit. l had a line on 1994 engine with low miles at a good price. . I chose to change engine out. Gess what same problem. I know thea new engine does not have a blown head gaskit. To make sure I pulled he heads off of old engine no blown head gaskit. The new engine came compleat The only parts that are coman are the ones mounted to car. HELP I dont know where to go from here. I am new to mustange V6 poblems. I don't have a clue.

start over. New mechanic would be a good start. Get your money back from the old one and for the new motor. If you don't know enough to answer these questions for yourself you definitely don't know for shit that there's not a blown HG on the new or the old one. I'll bet you put fucking diesel in the gas tank (did the same thing 20 years ago, causes misfire, white smoke and the fucker won't run except at high rpm and then with no power)

what he said. except i'm betting the head gasket, still.

I ask for help and get this shit Thisiis not the foraman for me.You should be ashamd of youself. YOU make he formam look bad.
PS I know how to check for blown H G utIam reoveing from astrok and can't do it.So I have to depend on others in the comunity and this is a comunity I do not want anythig to do with.

At least I admit when Idon'tknow what I am doing. thatsnot a bad thing.

Thats why we cant have nice things!

The 94-98 v6 mustangs blow head gaskets a lot. Its a very common problem for them to have. You can replace the head gaskets with new ones as long as the heads are straight and you could be ok for quite awhile.

Or you could of swapped over to a 99-04 v6 mustang motors known as the split port 3.8 v6. This has the same short block (lower part of motor minus heads,intake etc....) but uses better heads and intake manifold for more power and don't blow head gaskets as much. This is a direct bolt in motor wise with only a few other mods and a tune needed to make it run. And the car will be much faster.

You asked what to do, he told you. If you're as smart as you say you are, you wouldn't be here asking for help in the first place.

learn how to spell before you go off ranting about this forum, not "foraman".

white smoke
 

Sory about the mispell

people are trying to help you dude. Sometimes the news you want to hear is not the news that you need to hear.

the problem was ECM and a lose wire wire to coil. both will cause miss fire and white smoke. It cost me only $80 to have it checked out and $150 for ECM. Car is up and running just fine. I did not have to know how to spell or type corectly to get the ansewer.
PS
o by he wy I am STROKE VICTOM AND MY LEFT SIDE DOES NOT WROK AS IT SHOULD iI PRODUCE SOME INTRESING :DLOOKING DOCUMENTS.

damn dude i was going to rip you for you spelling also till i read this. don't let it discourage you from hanging around. some people just love correcting others even if their intentions are good. and some people come off as a-holes even though they don't mean to. my wife tells me that i sound like an a-hole when i talk to people sometimes. and that is the last thing i am trying to do.

What does mispelling have to do with writing words twice in a row or leaving words out entirely?
You're lying.

Sorry to hear about your problems....personal and otherwise. Try not to take comments around here to personally...it is all part of the show.

It sucks when you have a car problem, think you have it fixed, and only find out you are back where you started.