Mustang Boards

Mustang Boards (/)
-   V6 Tech Forums (https://mustangboards.com/v6-tech-forums/)
-   -   Help (https://mustangboards.com/v6-tech-forums/26594-help.html)

Iceman1990 10-16-2007 09:23 PM

Help
 
Hi i just bought a used 1996 mustang and i was wondering what i should do with it to make it a little bit faster or what i should do with the engine because it has 148000 miles on it i would appreciate your help thank you.

Must See 10-16-2007 09:39 PM

Gears and a Tune

Iceman1990 10-16-2007 09:46 PM

how much would something like that cost

WNRacing 10-16-2007 10:19 PM

Honestly, with 148,xxx I'd recommend saving your money. There's really no telling how the car was treated over the last 10+ years.

Save your money until you can do a motor swap to a beefed up 3.8 or 4.2 if you want to stick with the six. http://rpm-mustangs.com/home.php

If you prefer to just mod.

Upgrade to an 8.8" rear end with some 4.10 gears.
Tune the car, reset the speedo for the gears.

CAI's really don't give the 3.8's any significant gain (although they do look nice.)

Iceman1990 10-16-2007 10:30 PM

would sumthing like this work and if so how would i get it put in and where etc... http://rpm-mustangs.com/product.php?...cat=263&page=1

mysteed 10-16-2007 10:47 PM

Honestly, with that many miles I would look into getting a 99-04 V6 engine. They have 40hp more than your 96 engine and they respond to mods a lot better.

Iceman1990 10-16-2007 10:55 PM

where could i get sumthin like that

mysteed 10-17-2007 10:14 PM


Originally Posted by Iceman1990 (Post 286781)
where could i get sumthin like that

A local junkyard, eBay, other forums, ect.

spike_africa 10-18-2007 10:11 AM

Teal beast got one for around $470 shipped. Just shop around.

mpt_1962 10-18-2007 01:48 PM

This is a good site, best engine prices i have seen...
http://www.rhinoengines.com/fordcrateengineslist.htm

spike_africa 10-18-2007 03:03 PM

Umm $3,000 for 3.8L motors no thanks. I would get a used motor from a online source or local junkyard.

mpt_1962 10-18-2007 03:37 PM

but thats for a new motor...i'll be buying the 5.4 4v and doing the swap

spike_africa 10-18-2007 08:02 PM

Thats for a stock 99-04 3.8L v6 screw that. The stock v6 motors are tuff they are said to be good till the 450rwhp rang. If i was you get one locally from a junkyard or salvage place and do the split port motor swap (99-04 motors are called split port).

There is minor wiring that has to be changed and some connectors but not bad. Can be done with some freinds over a weekend or 2.

mysteed 10-18-2007 09:57 PM


Originally Posted by spike_africa (Post 287046)
Thats for a stock 99-04 3.8L v6 screw that. The stock v6 motors are tuff they are said to be good till the 450rwhp rang. If i was you get one locally from a junkyard or salvage place and do the split port motor swap (99-04 motors are called split port).

There is minor wiring that has to be changed and some connectors but not bad. Can be done with some freinds over a weekend or 2.

Actually the stock V6 motors are good till around 325-350rwhp. After that point, if you haven't upgraded the pistons and rods with forged ones you're running on hopes and prayers.

b ry87 10-24-2007 08:38 PM

motor
 
go to www.mustangsunlimited.com you can get a v6 motor for about 1900 to 2 grand which is not bad for a brand new motor. check it out.

Cheddarbob 10-25-2007 09:04 AM

just get an exhaust system and call it a day.


All times are GMT -7. The time now is 03:04 AM.


© 2024 MH Sub I, LLC dba Internet Brands