Purestang bumper gap...look inside
Thread Starter
|
Zig *hearts* Fishy
Joined: Jun 2005
Posts: 2,444
From: Pensacola, Florida
Purestang bumper gap...look inside
Here is an example of the problem you are going to have so you can actually see how bad it looks. I posted these pics in a thread back when I started my make over because I was going to get the Cobra hood also. This changed my mind.
Administrator
Joined: Sep 2004
Posts: 6,613
That bumper is sagging because the brackets are broken, not because of the design of the bumper.
I ahev teh same problem on mine. One bracket was broken initially due to the previous owner getting tapped, then the other side just broke on it's own. I have not bothered getting them fixed. My gap is not as noticeable because my car is black. But, I can easily lift up on my bumper and push it right into place about a full inch.
I ahev teh same problem on mine. One bracket was broken initially due to the previous owner getting tapped, then the other side just broke on it's own. I have not bothered getting them fixed. My gap is not as noticeable because my car is black. But, I can easily lift up on my bumper and push it right into place about a full inch.
Member
Joined: May 2006
Posts: 33
Wierd, I went to highschool with that guy, we had the only two 99-04 gen mustangs in the school. Where did you find that picture? BTW I gave him a really hard time about it when he got it done to and really there isnt anything wrong with the way its installed it just looks like that, and has since he got it back from the shop.
Guest
Posts: n/a
It has nothing to do with install, its just that the cobra bumper goes up way higher, so it lines up right.
BUT!!! THERE IS A SOLUTION TO THIS!!!!
ABC Exclusive makes a replica 04 cobra hood for the 99-04 stangs which has the gap filled!! Only thing is that the hood is pretty pricy.
BUT!!! THERE IS A SOLUTION TO THIS!!!!
ABC Exclusive makes a replica 04 cobra hood for the 99-04 stangs which has the gap filled!! Only thing is that the hood is pretty pricy.
Always Detailin'
Joined: Oct 2005
Posts: 3,556
From: Dayton, OH
Maybe it's just me, but I don't think it's that big of a deal. I know us Mustang enthusiast would notice it, but any other driver on the road and even other non-Mustang enthusiast more than likely won't ever notice it. If I wanted that hood, that gap would not stop me. Just my $.02.
Thread Starter
|
Zig *hearts* Fishy
Joined: Jun 2005
Posts: 2,444
From: Pensacola, Florida
That bumper is sagging because the brackets are broken, not because of the design of the bumper.
I ahev teh same problem on mine. One bracket was broken initially due to the previous owner getting tapped, then the other side just broke on it's own. I have not bothered getting them fixed. My gap is not as noticeable because my car is black. But, I can easily lift up on my bumper and push it right into place about a full inch.
I ahev teh same problem on mine. One bracket was broken initially due to the previous owner getting tapped, then the other side just broke on it's own. I have not bothered getting them fixed. My gap is not as noticeable because my car is black. But, I can easily lift up on my bumper and push it right into place about a full inch.
Senior Member
Joined: Jul 2005
Posts: 250
From: Faibanks, Alaska
Which bracket are we talking about here. I've had my bumper off before and I can't think of which one you are referring to.
Thread Starter
|
Zig *hearts* Fishy
Joined: Jun 2005
Posts: 2,444
From: Pensacola, Florida
Mine is the one on the radiator area under the hood. The actual bracket that comes off the pillar.
Senior Member
Joined: Apr 2006
Posts: 204
Most ppl don't know but the front of the 03 Cobra hood is shaped differently than the GT's. The very front of the Cobra hood is flatter/more horizontal while the GTs is curved. That gap can be fixed, with a little fabricating on the bumper. Not sure how, though.
Thread
Thread Starter
Forum
Replies
Last Post
