Power Adders Technical discussions for forced induction with nitrous and blowers.

Vortech Much Louder After Dynotune

Thread Tools
 
Search this Thread
 
  #1  
Old 07-10-2005 | 03:51 PM
VoodooChile's Avatar
Thread Starter
|
Junior Member
Joined: Jul 2005
Posts: 5
Default Vortech Much Louder After Dynotune

I had my car sct dyno tuned last week after putting on long tubes, Prochamber, aftercat, and a 3.73 gear and when I got the car back the Vortech V2 s-trim is making 5 times as much noise all through the rpm's. I called Vortech and they said I could send it in to have them check it out but I was wondering if anyone may have any ideas of what may be going on.

I'm kinda bummed out cuz I was all excited about the new mods just to get a big problem it seems.
 
  #2  
Old 07-10-2005 | 03:58 PM
03gtmustang's Avatar
Super Moderator
Joined: Jan 2005
Posts: 3,440
From: Northern Va
Default

Is it just louder or is it a different sound?
 
  #3  
Old 07-10-2005 | 04:14 PM
VoodooChile's Avatar
Thread Starter
|
Junior Member
Joined: Jul 2005
Posts: 5
Default

It used to make a slight wine at idle but it was quiet the rest of the time. Now it is a louder wine all the time. Quite loud. I took the belt off and there doesn't seem to be anything wrong with the blower that I can feel or hear when turning the pulley.
 
  #4  
Old 07-10-2005 | 05:58 PM
VoodooChile's Avatar
Thread Starter
|
Junior Member
Joined: Jul 2005
Posts: 5
Default

I took it off and am sending it back to be checked out. It's defitely messed up. I think :confused5
 
  #5  
Old 07-10-2005 | 06:21 PM
03gtmustang's Avatar
Super Moderator
Joined: Jan 2005
Posts: 3,440
From: Northern Va
Default

That sucks man, let us know what the problem is.
 
  #6  
Old 07-10-2005 | 07:14 PM
VoodooChile's Avatar
Thread Starter
|
Junior Member
Joined: Jul 2005
Posts: 5
Default

I know it's only got 200 miles on it. After I took it off I turned the pulley slowly and could feel some abnormal resistance. Bummer
 
  #7  
Old 07-10-2005 | 07:40 PM
03gtmustang's Avatar
Super Moderator
Joined: Jan 2005
Posts: 3,440
From: Northern Va
Default

have you talked to the shop that tuned your car?
 
  #8  
Old 07-10-2005 | 09:39 PM
Stevoneo's Avatar
Senior Member
Joined: Jan 2005
Posts: 598
From: Virginia Beach, VA
Default

sounds like a shop fault to me. Did you look at the prepeller and see if it was bent, chiped, broke or anything. Maybe some debree caught up in it. Might just be a bearing. the v2sq are normally pretty quite even when psi is cranked up on them.
 
  #9  
Old 07-11-2005 | 05:58 PM
VoodooChile's Avatar
Thread Starter
|
Junior Member
Joined: Jul 2005
Posts: 5
Default

Yeah but they said they didn't do anything to the blower. It's still under warrenty so Vortech should take care of it. I hope.
 
  #10  
Old 07-13-2005 | 11:05 PM
MustangMike's Avatar
Member
Joined: Nov 2004
Posts: 87
From: Miami
Default

ok here you go...i have a vortech, and im almost positive i know what sound you're talking about mine makes it every morning...you must make sure that they not push the car if the car was not warmed up..when the car is not warmed up there is no oil inside of the blower to help the lubrication...so most likely there are some bent impeller teeth in there..but good thing you still have that warranty on it..as long as you didnt changethe pulley you're good to go..they'll send you a brand new one..

:icon_bigg
 
  #11  
Old 08-07-2005 | 05:35 PM
white99gt's Avatar
600+rwhp club
Joined: May 2005
Posts: 60
From: atlanta,ga
Default

Originally Posted by Stevoneo
sounds like a shop fault to me. Did you look at the prepeller and see if it was bent, chiped, broke or anything. Maybe some debree caught up in it. Might just be a bearing. the v2sq are normally pretty quite even when psi is cranked up on them.

How can a shop that tunes the car be at fault????If they installed it yes.Just tuning it NO..

One thing to remember also vortechs have to break in like other parts do..My T trim when new was pretty quiet but after a few hundred miles as it loosened up.Got louder.
 
  #12  
Old 08-07-2005 | 06:54 PM
venom's Avatar
Super Moderator
Joined: Sep 2004
Posts: 6,075
Default

Maybe one of the guys at the shop not playing with a full deck of cards decided to start it up and take it for a joy ride without warming it up.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
HighSchoolGT
General Tech Forum
2
12-16-2007 10:20 PM
s281 saleen #230
General Tech Forum
1
07-08-2006 12:25 AM
40thblckgt
Pictures
18
06-10-2006 01:46 PM
roushrider81
Modular 4.6L Tech
12
06-29-2005 05:17 PM
MachGT
Pictures
0
05-09-2005 10:43 PM




All times are GMT -7. The time now is 11:48 PM.