I dont know if they are coming with center caps but, who cares. Brand new slicks 4-6 passes on them in a good size of 26X10 on a 15" rim. I pick them up in about a hour waitin for guy to get home from work...

 

good luck dude, i'm picking up a similar pair. if you don't mind me asking, what kind of power are you making and have you upgraded your axles? i just found this out the other day, that you;ll need to change your wheel studs to a longer hardened wheel stud when running a Weld wheel. A Draglite or Pro-Star wheel seats on the wheel studs and does not seat to the hub of the axle like a factory wheel.

 

hmmm i never heard this...but i will find out once i test fit them later on in april when its time for the first race of the season over here. my car is locked up in the garage for the winter and im not pulling it out till aprilish. i have about 420 hp to the wheels and still running the stock rear end. im not worried about breaking anything since im still on a 4R70W with 3500 stall and no trans brake or manual valve body. the tranny is a competition one but thats only added clutches, hardened input shaft upgraded valve body for some hard shifts.


i know people put in 3 inch wheel studs when running these rims but thats because its required by most tracks. the wheel studs should be easy to change out i could see the ABS exciter ring getting in the way but i think i can manage.

 

trust me, it'll happen. probably not right away, but eventually. a friend of mine uses weld rims for the street all the time, and he sheered two bolts just driving regularly.

 

Oh these will not be daily driven...thats what the FR500's are for. i just got new 315/35 DR's for those bastards last week. these slicks should save me some costly tread and will get me better 60fts. ****, i better do better than a freaking 1.9 i just checked my slips from last year and they were all 1.9, ******* WEAK.

if i do break some wheel studs than i will buy some hardened ones to replace them with...changing studs by hand is a real PITD!

 

Changing studs by hand is very simple. PM me if you want my write up.

 

i know how to do it its just a PITD

Thanks for the offer though

 

here they are...

 

lucky son of a b! let me know if you head out to Atco. You'll see me there often. lol.

 

that will be a long drive and a even longer swim, LOL.

I'm moving to phoenix, arizona in july once i leave germany. i aint goin back to the east coast...i did find a tech job for F-35 equipment in maryland but thats still on hold till i find out if i actually will get out on march 31st or not....

 

oh. haha.

 

dont worry steeda. i'll let u know when i go to atco... unless your scared.

 

lol. scared?


try to keep up sucka!

 

I want Pro Stars! All I have is sweet 94 tri bar v6 wheels.

Here are my sweet burnout/track wheels. Photo is like 3 years old or so.