Welp... I'm sure everyone knows who Turd Ferguson really is... So heres an update on my car.

I thought this would be a cool thread to bring to the table... figured alot of you chowder heads would enjoy it...

Welp... for all who don't know the story, which is pretty much all you, last May I was run off the road while enroute to work.

I went off the road, and well long story short, hit a pole... fucked up my car struts forward, and fucked up my back... Best part was the assclown that ran me off the road didn't bother to stop and see if I was at least alive... I was lucky, and he was lucky he got away, I'd have killed him...

Upon arriving home, I checked everything out and the damage wasn't as bad as it looked... The frame was straight, and an hour of cutting and welding would be all thats necessary to fix the frame in front of the struts...

But to piece the car together piece by piece would cost more then the cars value... Lucky for me, my dad is a retired trooper that worked in the auto unit, so he had friends that had access to salvage auctions. I could find a parts car for under 1000 bucks easy... Unlucky for me, 5.0 sn95s are extremely rare round these parts...

So here we are... 16 months later... Today we were the highest bidder on a 94 GT vert... It costed me 675 bucks, but I got everything I need to get my car back on the road... and more... The parts car should be here by the end of the week...

So heres the pics from last May... as I make progress, I will post lots of pics... I'm stoked... :bunny3:

Heres how she was after the wrecked dropped her off in the yard...


Heres what I'm shootin' for...

 

Here is the parts car

 

More pics...

 

 

oky doky...

Work on the parts car has come to a halt... Here is all the progress on the car... I uploading some pics from last Summer too so everyone can see the progress I am making... It feels so ****** awesome to look at the car and see it moving along so nicely.

So today I...
Pulled off the remainder of the accessories...
Pulled off the remainder of the motor mounts...
Pulled out the motor...
Pulled out whats left of the wire harness...
Pulled out whats left of all the ABS crap...

Next on the to-do list...

Friday and Saturday I want to drop out the H pipe, drop the tranny and check out the rear seal on it. (The yolk was pushed into it and fluid leaked out.) I also need to clean out the garage some more, clear up some room to work. Then I figure I'll pull off the bellhousing, clutch and flywheel, put the motor on an engine stand and clean that up all nicy nice. Get that ready to be rebuilt. Pull the car off the blocks, roll it out and powerwash whats left of the engine bay... Get that ready for the new frame pieces to be welded on...

All in all... I'm making progress quick... Still need that feller to come discharge the AC on the parts car so I can pull that motor and all that fun stuff...

Heres the pictures...

 

 

 

Motor is on the engine stand,
Tranny is out,
driveshaft is out,
car is off the blocks and movable...

Everything is ready to go back together!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Just need to do some power washing and cleaning up, drill out spot welds, and she will be put back together...

I also am gonna pull out the dash and some other interior ****... and take care of all that rust...

Here is a pic of where the shifter pops through the floor... as you can see I fucked up...

 

WOO!!!!!!!!!!!


Car the car out of the garage, organized ****... powerwashed everything...

Later tonight, I'm going to pull out the dash, and start rewiring everything...

I'm still waiting on that feller to discharge the AC in the parts car...

heres the pics...

 

damn... what should have take less then an hour, ended up taking a good portion of last night, and most of today... but its done...

Motor, tranny, drive shaft, and exhaust is all off...

Now I got to get all the dash and wiring out, ABS lines, Power steering lines, and any other little stuff... Then drill out the welds on both cars... clamp everything up, and start welding...

I also gotta get the windshield out of the Blue car... pull out the dash, and rewire all that...

Oh yeah... and reweld the sheet metal on the tunnel... fawk me...

pics...

 

Well thats my current status... I'm hoping to have the car drivable by Christmas.

 

I never noticed the big *** smash in your windshield..that looks kinda cool...lol

 

Yeah... its custom man... you won't never see a wind shield just like mine

 

getting up the post rate i see, do you buy the cars like this?

 

damn I remember you posting about that last May but forgot all about it. Quite a project haha. Do you still have the fox that you got? or was that someone else

 

Uh... I'm not sure who you are thinking about... I've been banned from here for... shoot... pretty long time now...

But I do have a fox... theres some pics of it in the pic lounge... Or you can view my profile >> View threads started by user... find it that way...

I have too many projects...

I have the sn95, when thats done... I will have the fox (I'm thinking I'll make a weekend warrior), and after that I'm going to restore a '55 ford pickup...

Projects is my middle name...

 

Or do you mean May of 2006?

lol... I was here back then... rofl... Shoot... I've been here since October of 05... God only knows whether or not they'll let me stay...

 

Duh I'm not that new haha. I was around one of the many times they banned you . Probably remember you talking about other projects on the other forum also

 

Yeah... I'm on a bunch of forums...
Admin @ motorheadlounge.com
Admin @ foxbodyforum.com
I run sn95forums.com website
And I post at a few others on occasion... one local and some other bullshit forum...

 

Well he had that blue pile running a great while until he tried to run over a telephone pole....lol

 

lol... completely missed your post... lol...

When I find a good deal on a car, I scoop it up... Like the fox I bought for 500 bucks... I didnt buy it for the powertrain... but for the 100%rust free chassis... which is a rare find around here...

The BAB SN95 GT I bought for 3000 bucks with less then 70k on the clock in mint condition... Thats my pride and joy...

 

Good to see your still around,and working on the old vert.

 

Got to give you props Bro!

That's more work than I would want to do anymore.

 

How's the truck treatin ya lance

 

I like working on these cars...

 

Glad to see all the progress on the vert. Great find on the parts car too. Inspires me to get to work on my Mustang II

 

It's damn nice but not the Cobra for sure