The Parts Desk Need an OEM Ford Part? You've come to the right place.

T-45 forks

Thread Tools
 
Search this Thread
 
  #1  
Old 02-01-2008 | 08:25 AM
Morgan The Black's Avatar
Thread Starter
|
Creature Of The Wheel
Joined: Sep 2007
Posts: 490
From: Mebane, NC
Default T-45 forks

You've got an article on corral.net about the t-45 and you mentioned an shift fork upgrade kit. I need at the very least a 3-4 fork, but if you could still get that kit that'd be great.

Thanks,
A.J.
 
  #2  
Old 02-01-2008 | 08:40 AM
Randy Stinchcomb's Avatar
Super Moderator
Joined: Aug 2005
Posts: 2,931
From: Randallstown, Md
Default

well, not sure which post your talking about? T-45's you can buy a shift fork(s) but there is NO kit for a T-45...now there is a shift fork/syncro Kit for the T-3650 trans thats $$$$
 
  #3  
Old 02-01-2008 | 08:55 AM
Morgan The Black's Avatar
Thread Starter
|
Creature Of The Wheel
Joined: Sep 2007
Posts: 490
From: Mebane, NC
Default

I saw this:

http://www.corral.net/tech/drivetrain/shiftthis.html

One thing you can do is go back to your dealer and tell them you what the Borg-Warner up-grade kit (stronger forks and detent).
Maybe discontinued?

But in any case I'm gonna need the 3-4 fork and if it makes a difference its out of a '98 cobra.
 
  #4  
Old 02-01-2008 | 10:14 AM
Randy Stinchcomb's Avatar
Super Moderator
Joined: Aug 2005
Posts: 2,931
From: Randallstown, Md
Default

Originally Posted by Morgan The Black
I saw this:

http://www.corral.net/tech/drivetrain/shiftthis.html

Maybe discontinued?

But in any case I'm gonna need the 3-4 fork and if it makes a difference its out of a '98 cobra.


OMG, 'Dat's an olde can't believe people are still reading thatand that was a 1 time deal wth Borg/Warner who no longer has anything to-do wth the T-45 since they sold it to Tremec in 1998. now a 3/4 shift fork for your T-45 is $27.47 and the 2 wear pads sre $12.34 a pr......
 
  #5  
Old 02-01-2008 | 12:35 PM
Morgan The Black's Avatar
Thread Starter
|
Creature Of The Wheel
Joined: Sep 2007
Posts: 490
From: Mebane, NC
Default

I think the wear pads are still ok.. the fork just kinda.. came to pieces. Well I hate to order just that so... I'm doing an auto to 5-speed swap and I dont reallly wanna cut the wiring harness to the tranny (or do I wanna buy one), so can I get the connectors for the vehicle speed sensor, back up light sensor, and the connector where it all hooks in to the main harness, pigtails would be great. Its in a 97 GT

And afew other odds and ends stuff, a thermostat gasket, oil filter housing gasket, and a set of lifters/lash adjusters for a 5.4/4.6 SOHC
 
  #6  
Old 02-01-2008 | 12:50 PM
Randy Stinchcomb's Avatar
Super Moderator
Joined: Aug 2005
Posts: 2,931
From: Randallstown, Md
Default

your going to have to buy the whole harness as we only service the VSS and back-up lamp.....thermostat o-ring is $6.47, lash adjusters are $9.49 each and for the housing gasket, @$10.00 but I need to know what year block.....
 
  #7  
Old 02-01-2008 | 12:53 PM
Morgan The Black's Avatar
Thread Starter
|
Creature Of The Wheel
Joined: Sep 2007
Posts: 490
From: Mebane, NC
Default

the block is a 99 and dare I ask how much is the harness...
 
  #8  
Old 02-01-2008 | 01:23 PM
Randy Stinchcomb's Avatar
Super Moderator
Joined: Aug 2005
Posts: 2,931
From: Randallstown, Md
Default

Originally Posted by Morgan The Black
the block is a 99 and dare I ask how much is the harness...
....sorry, more ?'s is it an iron or aluminum block?
well back to square 1 as the harness is discontinued by Ford
so the pigtail kit for the VSS is $19.95 and the other 2 are N/A....
 

Last edited by Randy Stinchcomb; 02-01-2008 at 01:29 PM.
  #9  
Old 02-01-2008 | 01:37 PM
Morgan The Black's Avatar
Thread Starter
|
Creature Of The Wheel
Joined: Sep 2007
Posts: 490
From: Mebane, NC
Default

Cast Iron, 5.4 Windsor hope that covers it

I guess I'll just make do on the wiring but can I go ahead and get the rest of it, I know its almost 4 on friday and it wont ship today so should I just give you a call on monday?

Thanks again
 
  #10  
Old 02-01-2008 | 01:53 PM
Randy Stinchcomb's Avatar
Super Moderator
Joined: Aug 2005
Posts: 2,931
From: Randallstown, Md
Default

Originally Posted by Morgan The Black
Cast Iron, 5.4 Windsor hope that covers it

I guess I'll just make do on the wiring but can I go ahead and get the rest of it, I know its almost 4 on friday and it wont ship today so should I just give you a call on monday?

Thanks again
ok, $7.36 on the filter housing gasket, so you want the 16 lifters and the VSS kit too? and yes, give me a call on monday as Im about headed out the door......ref # 167455
 

Last edited by Randy Stinchcomb; 02-01-2008 at 01:56 PM.
  #11  
Old 02-01-2008 | 02:04 PM
Morgan The Black's Avatar
Thread Starter
|
Creature Of The Wheel
Joined: Sep 2007
Posts: 490
From: Mebane, NC
Default

Will do

Thanks Randy
 




All times are GMT -7. The time now is 10:35 PM.