accufab?
#2
08-30-2005 | 01:52 PM
Super Moderator
Joined: Sep 2004
Posts: 6,312
From: Mexico
I have an accufab 75 mm t/b and a C&L plenum! I would have gone with an accufab plenum as well but i couldn't afford the difference between the c&l and the accufab back then! 
.....either way there is really not much difference!
.....either way there is really not much difference!
#3
08-30-2005 | 07:27 PM
Moderator
Joined: Dec 2004
Posts: 2,055
From: Peabody, MA
Originally Posted by 4.6 Love
I have an accufab 75 mm t/b and a C&L plenum! I would have gone with an accufab plenum as well but i couldn't afford the difference between the c&l and the accufab back then! .....either way there is really not much difference!
.....either way there is really not much difference!I have the 70mm And Accufab plenum combo. throttle response is better than it was while with stock parts. ...after about 3000rpms at WOT its slightly noticable with a lil more gitty up! its the best combo out there compared to other T/B's and plenums....italso looks good under the hood with teh polished finish.
#4
09-03-2005 | 02:41 PM
Member
Joined: Feb 2005
Posts: 72
From: Columbus, ohio
look here:
http://www.modulardepot.com/?show=articlesdet&aid=30
http://www.modulardepot.com/?show=articlesdet&aid=38
there also have been enough people using them that have said that the 75mm will not lose any hp, and will be all you need for the future if you decide you need boost. the 70mm from accufab is a very nice piece though, you won't be dissapointed.
http://www.modulardepot.com/?show=articlesdet&aid=30
http://www.modulardepot.com/?show=articlesdet&aid=38
there also have been enough people using them that have said that the 75mm will not lose any hp, and will be all you need for the future if you decide you need boost. the 70mm from accufab is a very nice piece though, you won't be dissapointed.
Thread
Thread Starter
Forum
Replies
Last Post
dsg_gt2004
The Reference Section
12
03-22-2005 08:48 PM
