they r the most annoying and biggest pain in the *** to install i got the clutch and dead pedal installed but not after slicing my fingertips open such a pain in the ***..

 

Just dont be like me and break the 17 dollar accel pedal. DO NOT!!! try to put that gay *** pin back in when you FINALLY get it out. Youll see what im talking about. Go to lowes and buy a bolt and a locking nut. I still have a stock gas pedal and bullitt rest of the set.

 

they say add soap but it just makes it even bigger pain in the *** tryin g to get it on as its slipping outta ur hands... howd u get urs on?

 

As for that stupid pin, I did the same thing ,bought a replacement bolt and lock nut, but the clutch and brake , here's a secret,-- cut the rubber off that you have to pry around the pedal and go and get your self some " silicone seal adhesive ",comes in small tube from your local walmart, smear it all over the pedal and electrical tape the new pad tight against it , leave it on for 12 hrs or so , pull tape off and wallaaaaaa,,, no blood from running that screw driver thru your hand, new pedal will never come off !

 

lol I just took the whole thing out and then put the pedals on

 

ya i was thinkin bout glueing em on i gonna cut slits on each of the corners and slide it on that way then superglue it also for the accel pedal u gotta take the whole thing off inorder to put it on? or can u knock the pin out wit a hammer from there?

 

Heres a good tip I can give you, but itll only work if you have access to a drill press. Take out the whole assembly, its like two bolts, and you have to unhook the throttle cable from the pedal assembly. Once you get it off, put it in the drill press and put a bolt in the chock of the drill press, now lower the bolt head onto the pin, and it will push the pin out, no problem. You must put the bolt into the drill press with the head facing down for this to work. Hope this might help, and that its clear.

 

i got em all on my dad put the brake and accel on he just pinch the pin with some pliers and came right out we used a mirror to see the back of the pedals and if the rubber was on all the way around looks good!..