Mustang Boards

Mustang Boards (/)
-   The Lounge (https://mustangboards.com/lounge/)
-   -   2 Questions (https://mustangboards.com/lounge/6779-2-questions.html)

theponyfactor 11-25-2005 10:32 AM

2 Questions
 
1) I bought that duplicolor caliper paint kit, and it says that you should take off all four tires and do it. The problem is I dont have any sort of lift, just a few jacks. so i was wondering how other people did theirs. One at a time?

2) I was talking to my uncle about the rims i bought and he was asking me if the speedometer is off now. I told him i didnt think so and he said that because the rims were bigger that the stock, that it should be. is that true? do i need to do something about this?

thanks

Shambles 11-25-2005 10:34 AM

So long as you kept the same tire height as your stock tires and rims you should be fine. No speedo correction is needed.

As far as the caliper paint, you would have to jack up one wheel at a time to get to each caliper.

madmatt 11-25-2005 12:15 PM

Go buy a set of four jackstands, they arent too expensive, and will let you get the car all the way off the ground for the caliper paint.

PureStang 11-25-2005 02:33 PM

im just going to do the calipers one at a time....its not worth buying 4 jack stands imo....just take ur time and ull be fine...

o and how cold was the temp out when the guys that did the caliper painting....i wanna do mine so bad but its like snowing here

WaterDR 11-25-2005 02:59 PM

Any serious gear head should HAVE 4 dam jack stands!

(BTW, I have to go to Pepboys and get mine still)

PureStang 11-25-2005 03:01 PM

but does every gear head have access to a car lift? :D

03mustang 11-25-2005 03:55 PM

4 Attachment(s)
I did. But I work for a Ford dealership so it was no problem for me :D plus I left mine dry overnite....here's what they look like.

stangspeed 11-25-2005 04:17 PM


Originally Posted by MT's#1Customer!
Any serious gear head should HAVE 4 dam jack stands!

(BTW, I have to go to Pepboys and get mine still)

Bet!!! Jack stands are cheap and worth having around..kinda like a flashlight..lol

Badfish 11-25-2005 04:37 PM

I went to Pep boys today they had silver, red, blue, and black but no yellow :mad:

hockeyplayerhere 11-25-2005 04:49 PM

when i did my calipers on my old v6 i did one at a time, it took about an hour a side. Make sure each side is 100% dry before applying other coats. As for your rims, i think if you got 17" rims your outter tire diameter would not be off enough to mess the speedo up but if they are 18s it most likely did. The pics look like you have 17s however and the tires look about right, so i wouldnt worry about it if thats the case.

Icefreezen 11-25-2005 07:55 PM

Do 2 at a time and take your time drying no rush.....have a beer and chill

madmatt 11-25-2005 08:35 PM

I know you say its not worth buying four jackstands to paint the calipers, but its not just calipers, its springs, exhaust, gears, tires, should I go on. Like someone said, they are just helpful to have around. Just buy some, they arent that expensive.


All times are GMT -7. The time now is 12:55 AM.


© 2024 MH Sub I, LLC dba Internet Brands