Mustang Update!
If anybody cares ha. First i was going to get an 08 GT/CS, then i decided I wanted a 2010, then I decided I wanted an 03-04 Termi.
Well I finally came to my senses and decided to keep my GT. Exceptionally clean, low miles, decent amount of money put into it, and best of all, its PAID OFF! And i want to buy a house come september. So i wasn't about to just have a mid 13 second car. I went ahead and ordered a ZEX Wet kit, and a bundle kit that includes a purge, bottle pressure gauge, blow down, and bottle warmer. Spike convinced me, along with many others to go ahead and do the J-Mod. I figure it will go well with my 4.10 gears. I am now currently looking for 2 wheels to mount drags on, LIGHT as possible. So if anyone knows anything, hook it up. I will have pictures of the Nitrous kit install, and the J-Mod when the parts come in. Hopefully later this week. Biotch! |
:boink:
|
:beerchug::pepper::thatshot:
|
Awesome dude, sounds like a good plan! Never knew why you wanted to sell your modded gt for just a newer stock gt. I'm sure those mods will hold you off for a bit. Can always get a Termi later down the road.
Just wondering where'd you order the zex kit and bundle kit? Will be ordering one soon and just trying to see if there are any cheaper places. |
I think ryan should create www.followspikesidea.com
|
He told me this yesterday. I'm special.:D:D
|
weld draglites for rims to mount some drag radials on. i just picked up a pair, and they are light as f**k.
|
Well sounds like you made a good decision. I'd love to have a cobra too but sometimes you gotta take care of other things first. How much is the wet kit?
|
The wet kit itself was 529 over at Brenspeed.
Sean, you can get the bundle for 275 over at atlanticspeed.com. Good deal. Free shipping too. Weld draglites are a possibility but not looking to spend a whole lot. Trying to maybe get some used 99 cobra wheels to mount the drags on. |
Congrats! I'm glad you finally came to your senses. :)
Now, can someone explain to me in layman's terms what the hell a 'J Mod' is? :o |
you drill holes in your seperator plate to allow more fluid in which allows the tranny to grab gears harder....
|
Originally Posted by Stephen4036
(Post 387741)
you drill holes in your seperator plate to allow more fluid in which allows the tranny to grab gears harder....
|
yup, holes in the seperator plate which allows more fluid to flow to the bands and much faster. No more p*ssy shifts. less heat. winner!
|
Originally Posted by Stephen4036
(Post 387741)
you drill holes in your seperator plate to allow more fluid in which allows the tranny to grab gears harder....
REMEMBER THIS MOMENT. |
Originally Posted by PColav6
(Post 387773)
That may seriously be the most on-topic contributory post you've ever had on this forum.
REMEMBER THIS MOMENT.
Originally Posted by Stephen4036
exhuast leak, i had a code like that today for my car when dustin scanned it b/c of tranny code i threw and he said it was from the leak.
Originally Posted by Stephen4036
we scanned and i get the Cat Code (O/R H Pipe) and then a rich/lean code cant remember b/c of the leak, then the Shift Accumulator Code since 1-2 Accumulator isnt going up and down properly so.
STEPHEN HAS 3 USEFUL POSTS! HOLYMOTHERFUCKINGSHIT! :p |
3 out of 2,592 isnt that bad
|
Originally Posted by Lazerred6
(Post 387777)
3 out of 2,592 isnt that bad
We should keep Stephen out of Steeda's happiness thread, haha. |
Originally Posted by Steeda97
(Post 387734)
The wet kit itself was 529 over at Brenspeed.
Sean, you can get the bundle for 275 over at atlanticspeed.com. Good deal. Free shipping too. http://us.st12.yimg.com/us.st.yimg.c...2043_225176797 |
were are you going to put ur drink?
|
Originally Posted by Stephen4036
(Post 387783)
were are you going to put ur drink?
|
Originally Posted by SeanStang
(Post 387792)
In the other cup holder....there are 2 you know. ;)
|
Originally Posted by HokieStang00
(Post 387794)
WhaT aboUt Yo BitChes?
Steeda- How big of a shot do you plan on running? |
Originally Posted by SeanStang
(Post 387797)
They can hold their own damn drinks! haha.
|
Originally Posted by HokieStang00
(Post 387794)
WhaT aboUt Yo BitChes?
|
Originally Posted by SeanStang
(Post 387797)
They can hold their own damn drinks! haha.
Originally Posted by Switch
(Post 387799)
His bitch can hold her own damn drink! :D
|
Yeah in ours theres 2 cup holders, making the wires visible on the one side, doesn't look too flattering. I am mounting my switches inside the little compartment in the center console. For now at least. I cant think of a better idea.
125 shot (zex) |
Originally Posted by stephen4036
you drill holes in your seperator plate to allow more fluid in which allows the tranny to grab gears harder....
Originally Posted by PColav6
(Post 387773)
That may seriously be the most on-topic contributory post you've ever had on this forum.
REMEMBER THIS MOMENT. Congrats on all the new mod Steeda, it probably would have been nice to have a new car, but not having a payment is just as nice. |
Originally Posted by Steeda97
(Post 387809)
Yeah in ours theres 2 cup holders, making the wires visible on the one side, doesn't look too flattering. I am mounting my switches inside the little compartment in the center console. For now at least. I cant think of a better idea.
125 shot (zex) |
Yeah its a 2000. Doesn't really look like it.
|
1 Attachment(s)
Here, found the pic I was looking for. Could definitely be done cleaner, but you get the idea.
Attachment 19807 |
All times are GMT -7. The time now is 07:03 PM. |
© 2024 MH Sub I, LLC dba Internet Brands