Originally Posted by MattJ
USPS is way faster than UPS.
|
Any bajo from an 03+ mustang will work. The cobra and 03+ stangs use the same bolts, course threaded. Go to your local auto store, get two lines and remove the bajos. I had to do this do to the fact that I have an 04gt and put on Bullittttt brakes, they take fine threaded. I still have my course threaded if you want.
|
Originally Posted by dfroster
Any bajo from an 03+ mustang will work. The cobra and 03+ stangs use the same bolts, course threaded. Go to your local auto store, get two lines and remove the bajos. I had to do this do to the fact that I have an 04gt and put on Bullittttt brakes, they take fine threaded. I still have my course threaded if you want.
thanks for the info :beerchug: |
Originally Posted by dfroster
Any bajo from an 03+ mustang will work. The cobra and 03+ stangs use the same bolts, course threaded. Go to your local auto store, get two lines and remove the bajos. I had to do this do to the fact that I have an 04gt and put on Bullittttt brakes, they take fine threaded. I still have my course threaded if you want.
but i will with the bullitt brakes on my 04? lol... |
drove me nuts when I got everything and couldn't install due to the bajo. I called Ford and they couldn't help. Called a friend, who works for Ford, and he told me that mid 02 ford changed all the banjos to the course threaded type so as not to have two diff ones in the Mustangs. Went and got some stock lines for an 99+ mustang and everything went right together.
|
Originally Posted by Jack The Ripper
Apparently so. LOL..
and when the hell does Greg get to come back? I miss that ignorant redneck. |
Originally Posted by Jack The Ripper
LOL... wait a sec.... so he doesent need the banjo's they are sending with the Cobra brakes.....
but i will with the bullitt brakes on my 04? lol... |
Originally Posted by dfroster
drove me nuts when I got everything and couldn't install due to the bajo. I called Ford and they couldn't help. Called a friend, who works for Ford, and he told me that mid 02 ford changed all the banjos to the course threaded type so as not to have two diff ones in the Mustangs. Went and got some stock lines for an 99+ mustang and everything went right together.
So, ziggster here gets the 10th ann Cobra Brakes, and the site says you need the goddamnbanjobolts, and he goes through all of this and it turns out his stock banjo's are just fine. I on the other hand, get the Mach1/Bullit brake conversion kit, which yer NOT supposed to have the goddamnbanjobolts, however, since it is an 04, IM the one who will need the goddamnbanjiobolts and not zigster? Well... guess i had that coming for finding ziggys goddamnbanjobolt drama so entertaining. lol |
THe 10th an cobra brakes use the course banjo, all others use fine banjo. 99-02 mustangs have fine bajos from the start, 03-04have course. Hope that clears that up.
|
Originally Posted by dfroster
Yes you will need a diff banjo IF you don't get the right lines with your kit. I didn;t buy in a kit. I got the calps/pads sep from the rotors and ss lines. If you buy all together they SOULD give you the right stuff.
|
Originally Posted by Jack The Ripper
Oh for cryin out loud.
So, ziggster here gets the 10th ann Cobra Brakes, and the site says you need the goddamnbanjobolts, and he goes through all of this and it turns out his stock banjo's are just fine. I on the other hand, get the Mach1/Bullit brake conversion kit, which yer NOT supposed to have the goddamnbanjobolts, however, since it is an 04, IM the one who will need the goddamnbanjiobolts and not zigster? Well... guess i had that coming for finding ziggys goddamnbanjobolt drama so entertaining. lol |
His is an 01.
Mine came with banjo bolts and I was told to remove some of the washers to make it fit right. They fit with them on so I left em. |
Also, Summit has then in stock for $10.00.
|
yup...i got an early 2001...fine thread bolts.
did I mention MT sucks a big one for screwing this up for me??? LOL |
Originally Posted by zigzagg321
yup...i got an early 2001...fine thread bolts.
did I mention MT sucks a big one for screwing this up for me??? LOL |
Originally Posted by todd03blown
Ziggy - If summit has then you can head down to Mcdonough at their new store and get them; less then an hour drive from MPH as I just went down there last weekend. Very nice store by the way; big as **** as well.
I'll have to get a 17inch spare rim now...315's cant go in front, doughnut spare wont clear the Cobra brakes. Whats your spare look like...maybe Ill get one of those....:wallbash: ...I overlooked this scenario. |
Originally Posted by zigzagg321
well, really my window of install time has passed. I would have done them any day this week had MT given me the correct parts from the get go. Tomorrow I'll be at MPH for quite a while...dunno how long. My lift and good tool set are at work...and we are closed Sundays. I am gonna have to wait for a weekday again...with parts...to do the install. I stil gotta get some brake fluid for the brake flush...well now I have time to do that...thanks MT!! lol. hopefully by then Ill have the BB's.
I'll have to get a 17inch spare rim now...315's cant go in front, doughnut spare wont clear the Cobra brakes. Whats your spare look like...maybe Ill get one of those....:wallbash: ...I overlooked this scenario. |
Originally Posted by Jack The Ripper
Damn i wish i lived near MPH....
and I would not have to get up before noon tomorrow. lol. |
LOL how the hell do you guys go through the day by wasting it like that. Im pissed if I sleep later than 9 or so...
|
Originally Posted by madmatt
LOL how the hell do you guys go through the day by wasting it like that. Im pissed if I sleep later than 9 or so...
I work 2:30pm to 10:30pm. i try to get up by 9, but i find it damn near impossible to go home after work and just go to bed. So i usually find myself unwinding at the local watering hole. |
Originally Posted by madmatt
LOL how the hell do you guys go through the day by wasting it like that. Im pissed if I sleep later than 9 or so...
|
Get a spare from a Cobra. Late mod resto has them also.
|
All times are GMT -7. The time now is 11:03 PM. |
© 2024 MH Sub I, LLC dba Internet Brands