longtube headers worth it?
do longtube headers (specifically SLP) give you enough power where it's worth the $750 for the part itself and $500 for an install? i know horsepowers costs alot of money but damn i could get a tune n gears for that much.
|
Hookers are $660 for headers and x-pipe. If you plan to do any other mods in the future, then yes, they are worth the price (especially if you plan to supercharge).
|
I would go with the tune and gears before LTs. And yes if you go FI they are very good for that.
|
for the money they are one of the last mods i would do.
|
Do them last.
|
or you can get teh MAC HTS coated for $340
|
alright thanks guys...i think im gona go with suspension n drag radials before my gears n tune tho, im already spinning wen i hit 1st hard i cant imagine what gears n tune are gona do to me
|
I would do the tune and gears first. I have shorties on my automatic and only did them at the time of the rebuild on my motor. Otherwise, I would have waited to do them a little longer. Go for the gears and tune...
|
Id do headers before tune. Makes no sence to do them after and get the car retuned later. Who knows how much power youll be cheating yourself out of. Just makes all that money you just spent on headers even more pointless.
HOWEVER, you can get an XCal2 or SCT chip with a mail order tune (free) for the gears, then get a real dyno tune after you install the headers. You dont need to spend so much money on headers. You can get Mac HTS coated headers for $340, or the Cremic coated ones for a little more and they work just fine. Then a Mac o/r H pipe for $170. Then do the install yourself or find someone to help. |
Originally Posted by 03gtmustang
(Post 212762)
Id do headers before tune. Makes no sence to do them after and get the car retuned later. Who knows how much power youll be cheating yourself out of. Just makes all that money you just spent on headers even more pointless.
HOWEVER, you can get an XCal2 or SCT chip with a mail order tune (free) for the gears, then get a real dyno tune after you install the headers. You dont need to spend so much money on headers. You can get Mac HTS coated headers for $340, or the Cremic coated ones for a little more and they work just fine. Then a Mac o/r H pipe for $170. Then do the install yourself or find someone to help. |
I still have stock headers on my car. I am planning on doing the swap when I do cams that way I get a retune and cover both bases.
|
I see you already have the Accufab TB & Plenum; I have been told that you see a minor difference with that setup. However once you get long tubes with the Accufab (or really any TB & Plenum setup) is when it really wakes up.
I know that a local shop here sells the bbk LT's with bbk X-pipe and install for $800. My understanding is most Stang shops hate doing the install. |
Originally Posted by 4wilds
(Post 212836)
I see you already have the Accufab TB & Plenum; I have been told that you see a minor difference with that setup. However once you get long tubes with the Accufab (or really any TB & Plenum setup) is when it really wakes up.
I know that a local shop here sells the bbk LT's with bbk X-pipe and install for $800. My understanding is most Stang shops hate doing the install. |
Originally Posted by 4wilds
(Post 212836)
My understanding is most Stang shops hate doing the install.
|
03gt...you're the ginchiest. Is that cool or what.
|
Originally Posted by r3dn3ck
(Post 212862)
03gt...you're the ginchiest. Is that cool or what.
|
just wondering
Ive got a question for you guys with mac LT's, yall have any trouble with them?
My buddy told me that you will have blowing header gaskets. I have a set of used mac LT's. any suggestions???:help: |
No problems with mine. Had em on for about 1 year.
|
the only way that u can get blown header gaskets is if u reuse the stock ones....if u get brand new ones than they should last longer than you....haha
|
OK, i didnt read this whole thread, but here's my first hand in put...
I have full SLP exhaust and got SLP LT's and SLP catted X installed at the same time. This is my only major mods beside a CAI and a custom tune. With that said, LT's should be more on the list for exhaust/sound/tone preferance than power (unless you're forced inducted) I spent 900 dollars for the LT's and catted X brand new and 500 for both installed together. If I had to do it again, I would prolly just of gotted a catted X, 4.10's gears, DR's and still my tune. Then again, it would be really hard to tell for I LOVE my exhaust sound/note and get multiple complements every day. For your reference... from my factory tune with my exhaust set up to a few tweaks running on 93 with a custom tune, I only gained 5RWHP. |
Originally Posted by whitethunder46
(Post 212998)
OK, i didnt read this whole thread, but here's my first hand in put...
I have full SLP exhaust and got SLP LT's and SLP catted X installed at the same time. This is my only major mods beside a CAI and a custom tune. With that said, LT's should be more on the list for exhaust/sound/tone preferance than power (unless you're forced inducted) I spent 900 dollars for the LT's and catted X brand new and 500 for both installed together. If I had to do it again, I would prolly just of gotted a catted X, 4.10's gears, DR's and still my tune. Then again, it would be really hard to tell for I LOVE my exhaust sound/note and get multiple complements every day. For your reference... from my factory tune with my exhaust set up to a few tweaks running on 93 with a custom tune, I only gained 5RWHP. |
i got another question for you guys. i have mac LTs and i was wondering if i had to go with macs mid pipes or if i could go with another brands
x-pipe. i would rather have an x instead of an h pipe. |
It depends on the end of the LT's. I know with SLP you have to have SLP mid pipe
|
i found a guy that has slp lm's on his car and hates it. he said that it has less
a few miles on the exhaust. he also has an o/r x-pipe, its a bbk brand. he told me that he would take $650 for the whole thing. could i just get the cat back and bolt it on to the exhaust i already have. the mid pipe is stock but i had an x welded in place of the h. he said he would take 450 for the cat back. is this reasonable and would you put that exhaust on your car? i appriciate the help i have been getting from you guys. im pretty new to the stang scene. |
Originally Posted by yellow99
(Post 215023)
i found a guy that has slp lm's on his car and hates it. he said that it has less
a few miles on the exhaust. he also has an o/r x-pipe, its a bbk brand. he told me that he would take $650 for the whole thing. could i just get the cat back and bolt it on to the exhaust i already have. the mid pipe is stock but i had an x welded in place of the h. he said he would take 450 for the cat back. is this reasonable and would you put that exhaust on your car? i appriciate the help i have been getting from you guys. im pretty new to the stang scene. as for the exhaust offer him 400..i paid 350 for my LM1 cat back...i also dont like how it sounds and i have a catted xpipe...id go w/ loudmouth 2's, magnapacks or stingers |
I paid $350 or something like that for my BBK Ceramic Coated L/T's with a VRS X Pipe (used) and installed them myself...FREE.
WORTH IT! |
All times are GMT -7. The time now is 09:11 PM. |
© 2024 MH Sub I, LLC dba Internet Brands