Mustang Boards

Mustang Boards (/)
-   General Tech Forum (https://mustangboards.com/general-tech-forum/)
-   -   rattle noise (https://mustangboards.com/general-tech-forum/17955-rattle-noise.html)

chumouch 09-16-2006 11:08 AM

rattle noise
 
I've Been Hearing A Rattling Noise From My Engine Everytime I Step On My Gas The Problem Is This Happens When The Car Gets Hot And It Causes The Car To Loose Great Power Anyone Please Can You Help Me With This Problem It Also Happens When The Engine Is Cold But Not As Often When It's Hot Please Help

Ghostalker 09-16-2006 11:35 AM


Originally Posted by chumouch
I've Been Hearing A Rattling Noise From My Engine Everytime I Step On My Gas The Problem Is This Happens When The Car Gets Hot And It Causes The Car To Loose Great Power Anyone Please Can You Help Me With This Problem It Also Happens When The Engine Is Cold But Not As Often When It's Hot Please Help

I would say take to a shop, and to stop capitalizing the first letter of every word, thats just weird... and It might fix the problem.
Like, we could all sit her and talk about what we think is wrong, but you will still have to bring it to a shop. Honestly I think the rattle would be from a loose cat, or cat heat shield or something, but would really explain this 'power loss' so, to a ford dealership or shop with you!

chumouch 09-18-2006 08:24 PM

yes
 
thanks sir

spike_africa 09-18-2006 08:55 PM

if it sounds like a marble in a paint can that it could be detonation. considering it happens when the car is hot makes me lean that way even more. You could have some carbon build up etc... there is alot to narrow down here.

Is the noise from the outside of the engine or inside? and does it happen when you rev the egine while stopped or only under a load?

chumouch 09-18-2006 09:07 PM

noise
 
thanks for your reply the funny thing is it does not happen if the car
is stopped and i rev, it only happens when it's in gear and im driving.
it's coming from the inside it sounds like alot of dirt

chumouch 09-29-2006 07:42 PM

detonatuon
 
i think i have a detonation problem however anyone knows whats the best way to take care of this?. please help guys

bassman97 09-29-2006 09:12 PM

You have any kind of mods like a programer, higher compression, different timing, etc? Try running higher octane. If that cures the problem, then you definately have a detonation problem.

chumouch 09-29-2006 10:58 PM

Rattling Noise
 
OK I WILL TRY A HIGHER ACTAIN JUST TO LET YOU KNOW I HEAR THE NOISE ONL when the car is hot and i step on the gas other than that everything is ok I do not have any mods are anything everything is stocked

eventer289 09-29-2006 11:17 PM


Originally Posted by chumouch
OK I WILL TRY A HIGHER ACTAIN JUST TO LET YOU KNOW I HEAR THE NOISE ONL when the car is hot and i step on the gas other than that everything is ok I do not have any mods are anything everything is stocked

ENGLISH man. We need ENGLISH!

chumouch 09-29-2006 11:29 PM

rattling noise
 
hey men just relax and be friendly aight.... I just need help, not for anyone to disrespect aight.Anyone who can help please I am trying to get rid of this noise thats slowing my car down alot and can't seem to get rid of it no matter what I try.I was told to check out this forum

MattJ 09-30-2006 06:24 AM

Sounds like pinging to me if its only under load. Like spike said, try higher octane fuel. Also take your air filter out and see how dirty it is. Also clean your mass air flow meter. mine used to ping on heavy acceleration because my k&n would let dirt and oil through and cause my mass air flow meter to get incorrect readings from being dirty and oily.

chumouch 09-30-2006 01:57 PM

rattle
 
ok I'll try that where is the mass air flow meter I am not familiar with that please and thanks for your responce

bassman97 10-01-2006 08:59 AM

Right after the filter, you will see a plastic cylinder thats bolts to the airbox.

chumouch 10-16-2006 05:59 PM

convertable problem
 
I have a huge hole all the way across the back of my convertable car i cannot tape or glue it what's the best thing to do without buying a new top >>just for now
Thanks>>

Silvermustang2001 08-06-2015 12:05 PM

Help
 
I am having the same problem, can someone help? I have a 2001 cobra just got a brand new clutch, flywheel, and tranny done 1k miles ago. Only rattles once hot and taking off in a 1st gear, or in a higher gear with lower RPMs and accelerating. It is really killing my HP, also have blow by when accelerating hard small oil leak. Those are my only problems
Someone who experience plz help! Thanks


All times are GMT -7. The time now is 08:03 PM.


© 2024 MH Sub I, LLC dba Internet Brands