I can't get any of those 4 bolts off that bolt the TB to the phlenum. I have the right sized wrench but the bolts just wont budge and it wearing the metal off the bolts. why??????

-Tim

 

is it rusted? even if it isnt get some PB blaster and spray it on there that should help or heat it up with a torch be careful though!

 

What is a PB blaster?

 

Righty tighty lefty loosey..........:surrender PB blaster but those bolts shouldnt be too hard to take off

 

Try harder hahahaha.

"Left loosey righty tighty"....that made my night :banana:

 

PB blaster is just like liquid wrench but way better. you can find it at almost any autoparts store

 

i don't think it's my weakness thats stopping that bolt from comming off. I'm 120 with 10% body fat and i can bench 205. I don't think I need to do pushups...

ill get a PB blaster or see my my exhaust guy will heat it up with a torch for me.

 

put a half inch rachet on that bastard then. that should break those bolts loose. they are probably 10mm just give a good hit on the wrench most times pulling isnt enough. you probably lack the fore arm fortitude.

 

spray the bolts down with PB and let it sit for 5-10 minutes..then give a try. try this before you go with a torch.

 

how are you only weighing 120 pounds?????? Are you a Midget?

 

im like 5-6. I think i might get a PB blaster then. that would probably help me with other projects in future right?

 

PB blaster is great **** to have around the house anyways. 10x's better than WD-40