5.0L Tech There's no replacement for displacement.

need some help

Thread Tools
 
Search this Thread
 
Old Apr 13, 2009 | 10:16 PM
  #1  
blkcobra09's Avatar
Thread Starter
|
Junior Member
Joined: Apr 2009
Posts: 5
Default need some help

I have a 96 V6 cobra clone with a 5.0 swap in it. Not a lot of room under the hood. What can i do to increase power without needing a lot of room?
 
Old Apr 14, 2009 | 07:23 AM
  #2  
spike_africa's Avatar
Administrator
Joined: Sep 2004
Posts: 11,974
From: Orlando,Florida
Default

You name it and it can be done to make more power. Heads,intakes,cam,nitrous,turbos,blowers,exhaust and the list goes on and on. The real question is what can you afford to spend to go faster and what is done already to the motor and what is your goal with the car. Is it a street only car, a street/strip car, strip only etc..
 
Old Apr 14, 2009 | 03:36 PM
  #3  
blkcobra09's Avatar
Thread Starter
|
Junior Member
Joined: Apr 2009
Posts: 5
Default

It has a cam and flows done already. I have about $1000 to spend on it
 
Old Apr 14, 2009 | 03:37 PM
  #4  
Lazerred6's Avatar
Pocket Rocket
Joined: Jan 2008
Posts: 3,791
From: Grand Rapids MI
Default

Nitrous oxide would be really fun for under 1k
 
Old Apr 14, 2009 | 05:13 PM
  #5  
SLP02GT's Avatar
Senior Member
Joined: Mar 2006
Posts: 382
Default

Nitrous would be under a grand, or you could get an upper/lower intake manifold and rear gears. Or headers and gears
 
Old Apr 14, 2009 | 07:28 PM
  #6  
blkcobra09's Avatar
Thread Starter
|
Junior Member
Joined: Apr 2009
Posts: 5
Default

I have 3.73 gears right now, should i still get new gears then?
 
Old Apr 15, 2009 | 06:30 AM
  #7  
SLP02GT's Avatar
Senior Member
Joined: Mar 2006
Posts: 382
Default

nah I wouldn't bother getting different gears if you have 3.73's
 
Old Apr 15, 2009 | 06:53 AM
  #8  
spike_africa's Avatar
Administrator
Joined: Sep 2004
Posts: 11,974
From: Orlando,Florida
Default

So what is done to this car and what do you want to do?
 
Old Apr 15, 2009 | 04:04 PM
  #9  
blkcobra09's Avatar
Thread Starter
|
Junior Member
Joined: Apr 2009
Posts: 5
Default

Cam, Flowmasters, Spark plug wires, Has the stock pinched headers, and thats it. Im just looking for some nice horsepower gain without spending alot or going over the top. I was thinking 65mm throttle body, aftermarket headers, and CAI. Anything else i could do? I use to have a ricer honda civic and thats why i am asking all the questions, sorry
 
Old Apr 16, 2009 | 07:11 PM
  #10  
SLP02GT's Avatar
Senior Member
Joined: Mar 2006
Posts: 382
Default

Headers, and upper and lower intake manifold will give you nice gains
 
Old Apr 17, 2009 | 06:08 AM
  #11  
spike_africa's Avatar
Administrator
Joined: Sep 2004
Posts: 11,974
From: Orlando,Florida
Default

What cam is in it? And other then nitrous with is the only power adder you can do for cheap your best bet would be long tubes, and o/r mid pipe then see what money you have left over.
 
Old Aug 5, 2009 | 01:09 PM
  #12  
blkcobra09's Avatar
Thread Starter
|
Junior Member
Joined: Apr 2009
Posts: 5
Default

just tore it apart today and i do not have an aftermarket cam
 
Old Aug 5, 2009 | 01:33 PM
  #13  
stanger00's Avatar
Senior Member
Joined: Nov 2004
Posts: 3,842
From: Pinole, Ca
Default

im sure you could squeeze on some heads and an intake with that amount of money...just as long as you install everything. im sure you will need some bigger injectors though and a MAF to help feed it fuel...
 
Old Aug 6, 2009 | 07:12 AM
  #14  
spike_africa's Avatar
Administrator
Joined: Sep 2004
Posts: 11,974
From: Orlando,Florida
Default

Why did you tear the motor apart? Upgrades I hope
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
OneWicked46
Modular 4.6L Tech
6
Aug 1, 2005 05:18 AM
trickedoutstangg
The Lounge
13
Jun 30, 2005 09:51 PM
kcmustang
5.0L Tech
9
Apr 22, 2005 09:20 PM
kcmustang
New Members!
1
Apr 18, 2005 09:00 AM
USAFTexan80
V6 Tech Forums
6
Dec 24, 2004 07:50 AM




All times are GMT -7. The time now is 11:42 PM.