Weld Pro Stars

mitchatah · 10-09-2007, 07:15 PM

Any one put Weld Pro Stars on the front of an 99-04 gt?

I had bought a set that was off of a mustang (5 lug conversion) but the back of the wheel hits the caliper bracket.

Anyone have the specs for the right backspacing, etc

i would like to put on 15x3.5 weld prostars.

thanks!

Lunati · 10-10-2007, 11:13 AM

To run the 15x3.5 you will need a 7/16" spacer to clear the stock brakes. If you have a cobra or bullit brake upgrade kit you will need a 1 1/4" spacer and probably have to get 3" studs.

mitchatah · 10-10-2007, 07:19 PM

well thanks for the info!!!!

I Borrowed a spacer from a friend but i did not check what size.

appreciate it greatly!!

10-09-2007, 07:15 PM	#1 (permalink)
mitchatah Junior Member Join Date: Dec 2006 Posts: 20	Weld Pro Stars Any one put Weld Pro Stars on the front of an 99-04 gt? I had bought a set that was off of a mustang (5 lug conversion) but the back of the wheel hits the caliper bracket. Anyone have the specs for the right backspacing, etc i would like to put on 15x3.5 weld prostars. thanks!

10-10-2007, 11:13 AM	#2 (permalink)
Lunati Whats that Whining Noise? Join Date: May 2005 Location: 305 Til I Die!! Posts: 403	To run the 15x3.5 you will need a 7/16" spacer to clear the stock brakes. If you have a cobra or bullit brake upgrade kit you will need a 1 1/4" spacer and probably have to get 3" studs. __________________ 04 DSG Blown GT/ 5 Speed 1.7L KB Blower, Headers, 4.10 Gears, etc... 397 RWHP & 407 RWTQ @ 9 PSI Tuned by Steen Racing Last edited by Lunati : 10-10-2007 at 11:22 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-10-2007, 07:19 PM	#3 (permalink)
mitchatah Junior Member Join Date: Dec 2006 Posts: 20	well thanks for the info!!!! I Borrowed a spacer from a friend but i did not check what size. appreciate it greatly!!