How To: Nitrous Install
 

Well I started my NX install a couple days ago. As I go along Ill be documenting every step and doing a write up on my site (D&DGarage) with pictures and everything. I should be adding to the write up everyday and Ill post in here every time I update the page. Click here for the write up.

This is an unbelievable write up! If you are buying an NX kit, or thinking about it, this is a must read.

nice write up so far. Wish there was venom 1000 write up.

I have a Video done for the Venom-1000, but no way to host the bastard.

My fuel block came today from NX, cost $37. For those of you that dont know, the fuel block is used on 03-04 cars because we dont have the shrader valve which is used to tap into the fuel rails for fuel.

Heres a picture of the fuel block and where it goes. You take that black switch out of the drivers side fuel rail, then put the block in and put the switch on top of the block. Then your hose from the fuel solenoid hooks into the block.

Oh man, Im so tempted to buy a kit...darn it. I want it so much.

The write up has been updated. I also finished the write up for my focus pump install.

Just wanted to let everyone know that the write up is now 100% complete.

Thanks man, your site is becoming one of the best places for useful information and installations. Hows that spray so far?

Belive it or not, I havent sprayed yet. Im waiting till the dyno tune which Ill be getting April 15th at Kauffman Motorsports.

Smart man. Glad it all came together for you.

Little update. Finally got the car tuned, didnt end up going to Kauffmans though. Check out the #'s in this thread.

http://www.mustangtuningforums.com/s...ead.php?t=2051

Who tuned it then?

Excessive Motorsport. The shop name is on top of the dyno sheet.

Well Im getting ready to start "stage 2" of my build. As of right now this will include a built block by MPH, MPH 2.5 heads, P-51, NX 200 shot, built 4R70W, and a tune by MPH. Stay tuned....

Just to update everyone. "Stage 2" has totally changed. I got a Bullitt intake instead and will be getting a retune by Ed Clark in May. Also I need to change one thing about my write up. When you mount the heater it has to be on the bottom of the tank, so opposite of how I have it pictured. Also be sure to check out my site for more write ups.

Very nice!

this is going to come in handy next week. thanks Dan.


EDIT: ahhhh the pics dont work!! fix them please!!

thanks for fixing it man. that is definatley gonna be useful.

No problem man, let me know if I left anything out.

Will do.

I just read through the entire thing, very nice a and very thourough write up. But damn that looks complicated, lol.

I also noticed that the write up doesnt really talk about installing the purge line.

Where did you put yours?

I used some regular hose and routed it up through the firewall and through the plastic cowl by the windshield.

that's where I want to put it. did the kit come with hose, or did you have to buy some/have some on hand already (not from the kit)

The kit came with some short metal hose that you would have to bend. I just cut that hose so it was real short, then found some rubber hose to slide over that. I should probably take pictures and put them in the write up.

That would be great :)

badfish, are you getting the NX kit?? what kind of purge? Bottle heater?
what all did you get with your kit?
Just curious

Yeah, I bought the NX kit and the Gen X-2 kit. The Gen X-2 comes with purge, bottle heater, blow down tube, etc.

here are both the kits...MT doesnt sell em anymore tho.

NX Ford EFI Kit

Gen X-2 Kit

The only other things you need to buy are spark plugs, window switch, and a fuel block if you have a 03+ car.

yup....I got the MSD Digital window switch and the NGK TR6 plugs