How To: Nitrous Install

*03gtmustang* · 03-04-2005, 04:29 PM

Well I started my NX install a couple days ago. As I go along Ill be documenting every step and doing a write up on my site (D&DGarage) with pictures and everything. I should be adding to the write up everyday and Ill post in here every time I update the page. Click here for the write up.

WaterDR · 03-04-2005, 04:38 PM

This is an unbelievable write up! If you are buying an NX kit, or thinking about it, this is a must read.

Stevoneo · 03-04-2005, 04:42 PM

nice write up so far. Wish there was venom 1000 write up.

WaterDR · 03-04-2005, 04:51 PM

I have a Video done for the Venom-1000, but no way to host the bastard.

*03gtmustang* · 03-04-2005, 05:44 PM

My fuel block came today from NX, cost $37. For those of you that dont know, the fuel block is used on 03-04 cars because we dont have the shrader valve which is used to tap into the fuel rails for fuel.

Heres a picture of the fuel block and where it goes. You take that black switch out of the drivers side fuel rail, then put the block in and put the switch on top of the block. Then your hose from the fuel solenoid hooks into the block.

*madmatt* · 03-04-2005, 08:58 PM

Oh man, Im so tempted to buy a kit...darn it. I want it so much.

*03gtmustang* · 03-06-2005, 09:39 PM

The write up has been updated. I also finished the write up for my focus pump install.

*03gtmustang* · 03-25-2005, 09:34 AM

Just wanted to let everyone know that the write up is now 100% complete.

*madmatt* · 03-25-2005, 01:14 PM

Thanks man, your site is becoming one of the best places for useful information and installations. Hows that spray so far?

*03gtmustang* · 03-26-2005, 04:29 PM

Belive it or not, I havent sprayed yet. Im waiting till the dyno tune which Ill be getting April 15th at Kauffman Motorsports.

*madmatt* · 03-27-2005, 05:49 AM

Smart man. Glad it all came together for you.

*03gtmustang* · 04-18-2005, 08:36 PM

Little update. Finally got the car tuned, didnt end up going to Kauffmans though. Check out the #'s in this thread.

http://www.mustangtuningforums.com/s...ead.php?t=2051

*madmatt* · 04-19-2005, 06:14 AM

Who tuned it then?

*03gtmustang* · 04-19-2005, 11:49 AM

Excessive Motorsport. The shop name is on top of the dyno sheet.

*03gtmustang* · 07-20-2005, 09:09 AM

Well Im getting ready to start "stage 2" of my build. As of right now this will include a built block by miles per hour, MPH 2.5 heads, P-51, NX 200 shot, built 4R70W, and a tune by MPH. Stay tuned....

*03gtmustang* · 03-17-2006, 01:07 PM

Just to update everyone. "Stage 2" has totally changed. I got a Bullitt intake instead and will be getting a retune by Ed Clark in May. Also I need to change one thing about my write up. When you mount the heater it has to be on the bottom of the tank, so opposite of how I have it pictured. Also be sure to check out my site for more write ups.

01GTBlown · 03-17-2006, 02:20 PM

Very nice!

Badfish · 06-03-2006, 11:55 PM

this is going to come in handy next week. thanks Dan.

EDIT: ahhhh the pics dont work!! fix them please!!

Badfish · 06-04-2006, 03:34 PM

thanks for fixing it man. that is definatley gonna be useful.

*03gtmustang* · 06-04-2006, 05:42 PM

Quote:

Originally Posted by Badfish

thanks for fixing it man. that is definatley gonna be useful.

No problem man, let me know if I left anything out.

Badfish · 06-04-2006, 06:55 PM

Will do.

I just read through the entire thing, very nice a and very thourough write up. But damn that looks complicated, lol.

Badfish · 06-04-2006, 06:59 PM

I also noticed that the write up doesnt really talk about installing the purge line.

Where did you put yours?

*03gtmustang* · 06-04-2006, 11:42 PM

I used some regular hose and routed it up through the firewall and through the plastic cowl by the windshield.

03-04-2005, 04:29 PM	#1 (permalink)
03gtmustang Super Moderator Join Date: Jan 2005 Location: Northern Va Posts: 3,098	How To: Nitrous Install Well I started my NX install a couple days ago. As I go along Ill be documenting every step and doing a write up on my site (D&DGarage) with pictures and everything. I should be adding to the write up everyday and Ill post in here every time I update the page. Click here for the write up. __________________ D&D Auto Detailing -Dan

03-04-2005, 04:38 PM	#2 (permalink)
WaterDR Administrator Join Date: Sep 2004 Posts: 6,304	This is an unbelievable write up! If you are buying an NX kit, or thinking about it, this is a must read. __________________ Black 2000 GT Vert: Novi-2000 with Intercooler (375rwhp @ 9 psi); Tune by Kauffmans; Roush 380R Body kit; Steeda Subframes; Steeda Strut Tower Support; Deep Dish Bullets; FRPP 4:10's; SCT 4 Position Chip with four custom tunes; Steeda CAI; C&L Pleum; BBK 75 TB; SLP Loudmouth; SLP Catted X-Pipe; Bullitt Suspension; UPR Conrol Arms; Focus Fuel Pump My Car My Email

03-04-2005, 04:42 PM	#3 (permalink)
Stevoneo Senior Member Join Date: Jan 2005 Location: Virginia Beach, VA Posts: 598	nice write up so far. Wish there was venom 1000 write up. __________________ 2004 Mach 1 - New Baby Numbers Coming Soon 2001 Mustang GT - In Mustang Heaven 399.65 RWHP 384 Torque

03-04-2005, 04:51 PM	#4 (permalink)
WaterDR Administrator Join Date: Sep 2004 Posts: 6,304	I have a Video done for the Venom-1000, but no way to host the bastard. __________________ Black 2000 GT Vert: Novi-2000 with Intercooler (375rwhp @ 9 psi); Tune by Kauffmans; Roush 380R Body kit; Steeda Subframes; Steeda Strut Tower Support; Deep Dish Bullets; FRPP 4:10's; SCT 4 Position Chip with four custom tunes; Steeda CAI; C&L Pleum; BBK 75 TB; SLP Loudmouth; SLP Catted X-Pipe; Bullitt Suspension; UPR Conrol Arms; Focus Fuel Pump My Car My Email

03-04-2005, 08:58 PM	#6 (permalink)
madmatt Traitor...lol Join Date: Sep 2004 Location: Lexington, SC Posts: 7,885	Oh man, Im so tempted to buy a kit...darn it. I want it so much. __________________ RPMPlanets

03-06-2005, 09:39 PM	#7 (permalink)
03gtmustang Super Moderator Join Date: Jan 2005 Location: Northern Va Posts: 3,098	The write up has been updated. I also finished the write up for my focus pump install. __________________ D&D Auto Detailing -Dan

03-25-2005, 09:34 AM	#8 (permalink)
03gtmustang Super Moderator Join Date: Jan 2005 Location: Northern Va Posts: 3,098	Just wanted to let everyone know that the write up is now 100% complete. __________________ D&D Auto Detailing -Dan

03-25-2005, 01:14 PM	#9 (permalink)
madmatt Traitor...lol Join Date: Sep 2004 Location: Lexington, SC Posts: 7,885	Thanks man, your site is becoming one of the best places for useful information and installations. Hows that spray so far? __________________ RPMPlanets

03-26-2005, 04:29 PM	#10 (permalink)
03gtmustang Super Moderator Join Date: Jan 2005 Location: Northern Va Posts: 3,098	Belive it or not, I havent sprayed yet. Im waiting till the dyno tune which Ill be getting April 15th at Kauffman Motorsports. __________________ D&D Auto Detailing -Dan

03-27-2005, 05:49 AM	#11 (permalink)
madmatt Traitor...lol Join Date: Sep 2004 Location: Lexington, SC Posts: 7,885	Smart man. Glad it all came together for you. __________________ RPMPlanets

04-18-2005, 08:36 PM	#12 (permalink)
03gtmustang Super Moderator Join Date: Jan 2005 Location: Northern Va Posts: 3,098	Little update. Finally got the car tuned, didnt end up going to Kauffmans though. Check out the #'s in this thread. http://www.mustangtuningforums.com/s...ead.php?t=2051 __________________ D&D Auto Detailing -Dan

04-19-2005, 06:14 AM	#13 (permalink)
madmatt Traitor...lol Join Date: Sep 2004 Location: Lexington, SC Posts: 7,885	Who tuned it then? __________________ RPMPlanets

04-19-2005, 11:49 AM	#14 (permalink)
03gtmustang Super Moderator Join Date: Jan 2005 Location: Northern Va Posts: 3,098	Excessive Motorsport. The shop name is on top of the dyno sheet. __________________ D&D Auto Detailing -Dan

07-20-2005, 09:09 AM	#15 (permalink)
03gtmustang Super Moderator Join Date: Jan 2005 Location: Northern Va Posts: 3,098	Well Im getting ready to start "stage 2" of my build. As of right now this will include a built block by miles per hour, MPH 2.5 heads, P-51, NX 200 shot, built 4R70W, and a tune by MPH. Stay tuned.... __________________ D&D Auto Detailing -Dan

03-17-2006, 01:07 PM	#16 (permalink)
03gtmustang Super Moderator Join Date: Jan 2005 Location: Northern Va Posts: 3,098	Just to update everyone. "Stage 2" has totally changed. I got a Bullitt intake instead and will be getting a retune by Ed Clark in May. Also I need to change one thing about my write up. When you mount the heater it has to be on the bottom of the tank, so opposite of how I have it pictured. Also be sure to check out my site for more write ups. __________________ D&D Auto Detailing -Dan

06-03-2006, 11:55 PM	#18 (permalink)
Badfish Listen to reggae. Join Date: May 2005 Location: Colorado Springs, CO Posts: 8,704	this is going to come in handy next week. thanks Dan. EDIT: ahhhh the pics dont work!! fix them please!! __________________ '04 2.3l Evo '86 GSXR 750

06-04-2006, 03:34 PM	#19 (permalink)
Badfish Listen to reggae. Join Date: May 2005 Location: Colorado Springs, CO Posts: 8,704	thanks for fixing it man. that is definatley gonna be useful. __________________ '04 2.3l Evo '86 GSXR 750

06-04-2006, 06:55 PM	#21 (permalink)
Badfish Listen to reggae. Join Date: May 2005 Location: Colorado Springs, CO Posts: 8,704	Will do. I just read through the entire thing, very nice a and very thourough write up. But damn that looks complicated, lol. __________________ '04 2.3l Evo '86 GSXR 750

06-04-2006, 06:59 PM	#22 (permalink)
Badfish Listen to reggae. Join Date: May 2005 Location: Colorado Springs, CO Posts: 8,704	I also noticed that the write up doesnt really talk about installing the purge line. Where did you put yours? __________________ '04 2.3l Evo '86 GSXR 750

06-04-2006, 11:42 PM	#23 (permalink)
03gtmustang Super Moderator Join Date: Jan 2005 Location: Northern Va Posts: 3,098	I used some regular hose and routed it up through the firewall and through the plastic cowl by the windshield. __________________ D&D Auto Detailing -Dan