Mustang Forums

Go Back   Mustang Forums > Mustang Madness > Power Adders

Power Adders Technical discussions for forced induction with nitrous and blowers.

Reply
 
Thread Tools Display Modes
Old 09-26-2007, 04:32 PM   #1 (permalink)
Blue Thunder
Speed Demon
 
Blue Thunder's Avatar
 
Join Date: Sep 2004
Location: Austin, TX
Posts: 487
Send a message via AIM to Blue Thunder
Default Superchargers and fuel pumps?

Ok so i've decided to save my money and around summer i want to buy a vortech it with an aftercooler. My question is... i'm gonna be running 42ib injectors and i want a strong fuel pump to safely support the s/c....what fuel pump should i get and WHERE can i purchase that item? I looked a lil at the steeda replacement fuel pump but i'm not sure thats enough for an sc.
__________________
Bullitt Mods:
4.10 's , Magnaflow Catback, Prochamber (OR), BBK Ceramic Lt's, Custom Tune, MGW Short Throw, SLP Line Lok, MM LCA's, MM XL SFC's, MRT CAI, Steeda UDP'S, Tokicko Illuminas, Steeda Sport Springs, MM CC Plates, X2 Balljoint, Bumpsteer Kit, MSD Coilpacks, Eaton LSD, 31 Mosers, Spec stage 2 clutch, Spec steel flywheel, M/T DR's.
Cervini's RA Hood, 04 Cobra F. Bumper, 18" Bullitt Wheels, 20% Tint, HID Kit, Smoked Headlights, Painted interior trim(DHG), Seq. Tailights, Billett Stuff.
Blue Thunder is offline   Reply With Quote
Old 09-26-2007, 05:14 PM   #2 (permalink)
stanger00
Senior Member
 
Join Date: Nov 2004
Location: GERMANLAND
Posts: 2,386
Default

in the past steeda pumps sucked. if i were you i would go with a single ford GT pump they are about 120-130 bucks. if you cant get one of those than go with a SVT focus pump, you may need a 20 amp kenne bell BAP though. i have no clue where you can buy these things but you could try getting with randy on a price.
__________________
Quote:
Originally Posted by wnracing View Post
And as far as Stanger00... I wouldn't worry about him, I think Korea has ****ed with his head... No Mustang for that long will do that to ya...
stanger00 is offline   Reply With Quote
Old 09-26-2007, 06:07 PM   #3 (permalink)
Blue Thunder
Speed Demon
 
Blue Thunder's Avatar
 
Join Date: Sep 2004
Location: Austin, TX
Posts: 487
Send a message via AIM to Blue Thunder
Default

Why would i need a BAP if im using a SVT focus pump or Ford GT pump? I state agian where can i acquire these items? thanx
__________________
Bullitt Mods:
4.10 's , Magnaflow Catback, Prochamber (OR), BBK Ceramic Lt's, Custom Tune, MGW Short Throw, SLP Line Lok, MM LCA's, MM XL SFC's, MRT CAI, Steeda UDP'S, Tokicko Illuminas, Steeda Sport Springs, MM CC Plates, X2 Balljoint, Bumpsteer Kit, MSD Coilpacks, Eaton LSD, 31 Mosers, Spec stage 2 clutch, Spec steel flywheel, M/T DR's.
Cervini's RA Hood, 04 Cobra F. Bumper, 18" Bullitt Wheels, 20% Tint, HID Kit, Smoked Headlights, Painted interior trim(DHG), Seq. Tailights, Billett Stuff.
Blue Thunder is offline   Reply With Quote
Old 09-26-2007, 06:43 PM   #4 (permalink)
v6'stang
Senior Member
 
v6'stang's Avatar
 
Join Date: Mar 2005
Location: FL
Posts: 936
Send a message via AIM to v6'stang
Default

ur local ford dealership's parts department should be able to get the GT or svt focus fuel pump. randy will give u a bit of a discount on stuff ya order thru him at "the parts desk" section on here. as for the BAP (w/e that is) i haven't a clue.
__________________
Mods:
17x9 black cobra wheels, BBK CAI, tru dual flowmasters, sct 4bank elim. chip, motive 3.73's, frpp t-lok.


...and the list grows.
v6'stang is offline   Reply With Quote
Old 09-26-2007, 08:26 PM   #5 (permalink)
Dave04Mustang
Not Banned
 
Dave04Mustang's Avatar
 
Join Date: Jul 2006
Location: Austin, TX
Posts: 2,108
Default

randy ftw
__________________

sig by PcolaV6
Quote:
Originally Posted by WaterDR View Post
Hell, I could shove a rocket up my ass and jump on a skate board. Does that make me better then a 1988 GT?
Dave04Mustang is offline   Reply With Quote
Old 09-27-2007, 12:52 AM   #6 (permalink)
Codiddy
Senior Member
 
Codiddy's Avatar
 
Join Date: Mar 2006
Location: California
Posts: 1,782
Default

Quote:
Originally Posted by v6'stang View Post
as for the BAP (w/e that is) i haven't a clue.
BAP = Boost a pump
__________________
Quote:
Originally Posted by SeanStang View Post
Not true. I too have a 6 and I still don't give a shit about what you say...
Codiddy is offline   Reply With Quote
Old 09-27-2007, 01:45 AM   #7 (permalink)
stanger00
Senior Member
 
Join Date: Nov 2004
Location: GERMANLAND
Posts: 2,386
Default

Quote:
Originally Posted by Blue Thunder View Post
Why would i need a BAP if im using a SVT focus pump or Ford GT pump? I state agian where can i acquire these items? thanx
i use a focus pump and i maxed it out at 5200 RPMs so i had to through a BAP on it. so since your getting a blower with a after cooler there is a good chance you will pull over 400 hp so if you use a focus pump chances are it will be maxed.

randy, the parts desk.
__________________
Quote:
Originally Posted by wnracing View Post
And as far as Stanger00... I wouldn't worry about him, I think Korea has ****ed with his head... No Mustang for that long will do that to ya...
stanger00 is offline   Reply With Quote
Old 09-27-2007, 02:33 AM   #8 (permalink)
Blue Thunder
Speed Demon
 
Blue Thunder's Avatar
 
Join Date: Sep 2004
Location: Austin, TX
Posts: 487
Send a message via AIM to Blue Thunder
Default

If I order a single Forg GT pump will I need a bap? Found one @ rpmoutlet.com for $120
__________________
Bullitt Mods:
4.10 's , Magnaflow Catback, Prochamber (OR), BBK Ceramic Lt's, Custom Tune, MGW Short Throw, SLP Line Lok, MM LCA's, MM XL SFC's, MRT CAI, Steeda UDP'S, Tokicko Illuminas, Steeda Sport Springs, MM CC Plates, X2 Balljoint, Bumpsteer Kit, MSD Coilpacks, Eaton LSD, 31 Mosers, Spec stage 2 clutch, Spec steel flywheel, M/T DR's.
Cervini's RA Hood, 04 Cobra F. Bumper, 18" Bullitt Wheels, 20% Tint, HID Kit, Smoked Headlights, Painted interior trim(DHG), Seq. Tailights, Billett Stuff.
Blue Thunder is offline   Reply With Quote
Old 09-27-2007, 02:43 AM   #9 (permalink)
stanger00
Senior Member
 
Join Date: Nov 2004
Location: GERMANLAND
Posts: 2,386
Default

no, you most likely wont need a BAP. but you have to put a different wire connection on the GT pump so it will hook up to your stock fuel hat. i only read about this i never did a install so search mod depot or somethin for a right up.
__________________
Quote:
Originally Posted by wnracing View Post
And as far as Stanger00... I wouldn't worry about him, I think Korea has ****ed with his head... No Mustang for that long will do that to ya...
stanger00 is offline   Reply With Quote
Old 09-27-2007, 07:46 AM   #10 (permalink)
r3dn3ck
Wowbagger hates me too!
 
r3dn3ck's Avatar
 
Join Date: Nov 2005
Location: Magrathea/California
Posts: 7,015
Default

you can also use an aviator pump. IIRC they're like 310lph. That should be more than sufficient for your blower. Randy is still the best option for that.

I happen to have a spare brand new focus pump that I need to sell. 100 bucks + shipping if you want it.
r3dn3ck is offline   Reply With Quote
Old 09-28-2007, 05:37 AM   #11 (permalink)
Blue Thunder
Speed Demon
 
Blue Thunder's Avatar
 
Join Date: Sep 2004
Location: Austin, TX
Posts: 487
Send a message via AIM to Blue Thunder
Default

I would buy it wxcept i really don't want to buy a BAP.
__________________
Bullitt Mods:
4.10 's , Magnaflow Catback, Prochamber (OR), BBK Ceramic Lt's, Custom Tune, MGW Short Throw, SLP Line Lok, MM LCA's, MM XL SFC's, MRT CAI, Steeda UDP'S, Tokicko Illuminas, Steeda Sport Springs, MM CC Plates, X2 Balljoint, Bumpsteer Kit, MSD Coilpacks, Eaton LSD, 31 Mosers, Spec stage 2 clutch, Spec steel flywheel, M/T DR's.
Cervini's RA Hood, 04 Cobra F. Bumper, 18" Bullitt Wheels, 20% Tint, HID Kit, Smoked Headlights, Painted interior trim(DHG), Seq. Tailights, Billett Stuff.
Blue Thunder is offline   Reply With Quote
Old 09-28-2007, 11:30 PM   #12 (permalink)
silverstang04
DTP
 
silverstang04's Avatar
 
Join Date: Jul 2006
Location: Plano
Posts: 290
Default

I run the svt focus pump and so far so good no troubles.
__________________

Intercooled Procharger p-1sc-2,Steeda tri ax short shifter, steeda caster camber plates,Black Fr500's,255 40 17x9's front, 315 30 18x10's back, SCT2 tuner,BBK cold air, BBK 75mm T/B Plenum Combo,Mac o/r x pipe, flow master 50's, HPM Mega Bite jr lower control arms, Eibach sport line springs, KYB struts,KYB 8 way shocks in rear. FRPP 3.73's,FRPP Aluminum Drive shaft, [/center]
silverstang04 is offline   Reply With Quote
Old 09-29-2007, 06:50 AM   #13 (permalink)
WaterDR
Administrator
 
Join Date: Sep 2004
Posts: 6,374
Default

I run a focus pump too and no BAP. I am really not sure where these things max out.
__________________


Black 2000 GT Vert:
Novi-2000 with Intercooler (375rwhp @ 9 psi); Tune by Kauffmans; Roush 380R Body kit; Steeda Subframes; Steeda Strut Tower Support; Deep Dish Bullets; FRPP 4:10's; SCT 4 Position Chip with four custom tunes; Steeda CAI; C&L Pleum; BBK 75 TB; SLP Loudmouth; SLP Catted X-Pipe; Bullitt Suspension; UPR Conrol Arms; Focus Fuel Pump

My Car

My Email
WaterDR is offline   Reply With Quote
Old 09-30-2007, 08:22 AM   #14 (permalink)
r3dn3ck
Wowbagger hates me too!
 
r3dn3ck's Avatar
 
Join Date: Nov 2005
Location: Magrathea/California
Posts: 7,015
Default

focus pump should be good to over 400rwhp.
r3dn3ck is offline   Reply With Quote
Old 10-01-2007, 04:52 AM   #15 (permalink)
Bwhipple
Boosted
 
Bwhipple's Avatar
 
Join Date: Jun 2006
Location: Montoursville, PA
Posts: 259
Default

I ran out of fuel with the focus pump around 420 rwhp.
__________________
2003 Silver GT Vert.
--------------------------------
D1SC Procharged - 13lbs.
420.23RWHP - 419.69 RWTQ
Too many mods...
Bwhipple is offline   Reply With Quote
Old 10-01-2007, 07:17 AM   #16 (permalink)
stanger00
Senior Member
 
Join Date: Nov 2004
Location: GERMANLAND
Posts: 2,386
Default

i have a automatic thats why it maxed at 400. thats about 420-430 rwhp with a manual.
__________________
Quote:
Originally Posted by wnracing View Post
And as far as Stanger00... I wouldn't worry about him, I think Korea has ****ed with his head... No Mustang for that long will do that to ya...
stanger00 is offline   Reply With Quote
Old 10-02-2007, 07:59 AM   #17 (permalink)
timstpetefl
Senior Member
 
timstpetefl's Avatar
 
Join Date: Jul 2005
Location: St. Petersburg, Florida
Posts: 230
Send a message via Yahoo to timstpetefl
Default

Just get a BAP, you should be fine with 42# injectors...

You can order from http://kennebell.net/accessories/boo...boostapump.htm
__________________
timstpetefl is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Ad Management by RedTyger

SEO by vBSEO 3.0.0

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48