Cant wait to see that turbo runnin, go go! :D
|
Nice to see some sweet progress being made!
|
Awesome! Any ETA on when everything will get installed?
|
Good luck with the project. What are your plans for the hot side piping?
|
Originally Posted by Stanger Banger
(Post 434907)
damn dude lol that's sick gratz
Originally Posted by Deathdiesel
(Post 434914)
Cant wait to see that turbo runnin, go go! :D
Originally Posted by spike_africa
(Post 434915)
Nice to see some sweet progress being made!
Originally Posted by Switch
(Post 434938)
Awesome! Any ETA on when everything will get installed?
Originally Posted by whitestang04
(Post 434944)
Good luck with the project. What are your plans for the hot side piping?
|
Well I'm looking forward to seeing it completed. :D Have fun on the cruise! I would use a vacation
|
You've come along way in a short period of time! My "hats off" to you
|
Originally Posted by Switch
(Post 434979)
Well I'm looking forward to seeing it completed. :D Have fun on the cruise! I would use a vacation
Originally Posted by TUFF 4.6
(Post 434995)
You've come along way in a short period of time! My "hats off" to you
|
Congrats on the turbo. But it looks small? Are you cutting the bumper or getting a new one? I'm pretty sure it's not a big enough hole to breathe. But I may be wrong.
|
Just make sure you get the last word in with the wife..........."Yes Dear":D
|
3 Attachment(s)
Havent posted up in awhile but i got alot more stuff :D
42lb injectors 80mm MAF 255lph fuel pump oil guage gauge pod Hot side piping Boost guage Attachment 16025 3" to 2.5" Couplers (i bought the blue one's though) bought two of them and still missing one more. Attachment 16026 3" V-band clamp 3" v-band flange male/female 2.5" to 2" coupler Attachment 16027 Im pretty much done. Just need the wastegate/boost controller, oil lines and two more of the v-band clamps/flanges and then its time to get it installed :D:D:D Big thanx too a few buddies of mine :) |
Sounds like your making good progress. Good to see your still at it.
|
You've been at this for almost a year now? Looks like your getting pretty close. I'll bet your just itching to get this done!
I laughed when I saw the spectre reducer in the pic above. I bought a few elbows and straight couplers from silicone intakes for my procharger installation but realized I needed 2 reducers as well. I found 2 of them I think they were 3.5 - 4 inch at advanced auto and they were only like $10 each. I'm sure silicone intakes is better quality but I didn't have to wait for them and it saved me like $20. |
Originally Posted by spike_africa
(Post 447481)
Sounds like your making good progress. Good to see your still at it.
Originally Posted by redfire04
(Post 447486)
You've been at this for almost a year now? Looks like your getting pretty close. I'll bet your just itching to get this done!
I laughed when I saw the spectre reducer in the pic above. I bought a few elbows and straight couplers from silicone intakes for my procharger installation but realized I needed 2 reducers as well. I found 2 of them I think they were 3.5 - 4 inch at advanced auto and they were only like $10 each. I'm sure silicone intakes is better quality but I didn't have to wait for them and it saved me like $20. the silicone reducers cost me 15.13 for both, i saved half the price :D |
1 Attachment(s)
|
Time to get boosted. Go! Now!
|
heck yes :)
|
You've come a very long way from where you were when you first registered here. :D
|
Oh man its almost time. I haven't posted but I've followed your post on this project. Can't wait for videos of it running and a dyno chart.
|
1 Attachment(s)
Originally Posted by Black Sunshine
(Post 448878)
You've come a very long way from where you were when you first registered here. :D
Originally Posted by j_gutta870
(Post 448879)
Oh man its almost time. I haven't posted but I've followed your post on this project. Can't wait for videos of it running and a dyno chart.
|
Awesome man! its gonna be sweet.
|
So what are we thinking power wise, low 300rwhp I am guessing.
|
Get that on!!!
|
Originally Posted by NewMustangMan
(Post 448893)
Awesome man! its gonna be sweet.
Originally Posted by spike_africa
(Post 448911)
So what are we thinking power wise, low 300rwhp I am guessing.
Originally Posted by PistonsFan102
(Post 448954)
Get that on!!!
|
17 Attachment(s)
update:
2.5" V-band clamp 2.5" v-band flange male/female Attachment 15853 took off the exhaust system Attachment 15854 Driver side turbo header Attachment 15855 42# injectors and BBK adjustable fuel pressure regulator Attachment 15856 Also driver side turbo header installed but only for merging and then once everthing is good we will be taking it back off and painting the header/piping Attachment 15857 also the 3" u bends just came in. Im going to run 3" striaght pipe all the way back. http://i664.photobucket.com/albums/v...inchUbends.jpg this is were we might put the turbo and relocating the battery on the other side Attachment 15858 here are the pics of the half cold side piping done and intercooler mounted Attachment 15859 sorry for the small glance at the intercooler, lol Attachment 15860 Old down pipe was cut off and everything looks good Attachment 15861 3" V clamp/flange welded on Attachment 15862 Merge is built and its ready to be welded :) Attachment 15863 Attachment 15864 Attachment 15865 Attachment 15866 The turbo is mounted and the downpipe is started Attachment 15867 Attachment 15868 Attachment 15869 http://i664.photobucket.com/albums/v...drgalvan/2.jpg |
2 Attachment(s)
|
Looks like you've made quite a bit of progress!
|
Thanx manye
I wish i could say im doin all this but im not, lol. Its being done by iron horse motorsports (on my sig) |
hey, its being done...all that matters. Dont feel bad that you arent doing the work yourself, way more people couldnt than could.
|
Looks good. Youve made good progress.
|
All times are GMT -7. The time now is 01:04 PM. |
© 2024 MH Sub I, LLC dba Internet Brands