Thought I might whore a couple pics of my nearly complete project
#1
12-06-2006, 08:04 PM
Thought I might ***** a couple pics of my nearly complete project
Its a 93 Mustang LX 5.0, 5 Speed, hatch wearing www.americanmuscle.com's black 17x9 bullits in the rear:
Fresh paint job after complete strip down, done by my dad and myself:
Mostly new interior with grey, Corbeau CR1's:
Fresh paint job after complete strip down, done by my dad and myself:
Mostly new interior with grey, Corbeau CR1's:
#2
12-06-2006, 08:04 PM
Crappy under the hood shot, stock motor with bolt ons, redline tuning hood shocks:
Custom rear seat delete, w/ amp rack, and sub enclosure built into the spare tire well(can also be removed for the track in probably under 15 minutes):
Custom rear seat delete, w/ amp rack, and sub enclosure built into the spare tire well(can also be removed for the track in probably under 15 minutes):
#3
12-06-2006, 08:08 PM
Current front suspension:
-95 spindles, hubs
-99+ v6/gt twin piston PBR calipers w/ MM conversion lines
-strange struts
-steeda sway bar
-H&R super sports
-Energy suspension poly bushing complete kit installed
Soon to be replaced with:
-99 Cobra calipers
-13" rotors
-NRC cobra disc brake brackets for the rear with single piston calipers
-moser axles, 28 spline, stock fox length
-93 cobra master cyliner w/ MM 3-2 port conversion
-wilwood prop valve
-MM rear stainless braided soft brake line
-classictube prebent stainless hard brake lines
#6
12-06-2006, 08:18 PM
Honestly, I don't know that much. Just a little bit from what I've done on the car. I just spent hours researching, before I did ANYTHING, and made sure that I had everything, and was doing everything the best way I could find. Also wanted to make sure I did everything myself, save for building the motor. Damn these things are expensive though.....
Thanks guys!
#7
12-06-2006, 08:19 PM
Guest
Posts: n/a
Honestly, I don't know that much. Just a little bit from what I've done on the car. I just spent hours researching, before I did ANYTHING, and made sure that I had everything, and was doing everything the best way I could find. Also wanted to make sure I did everything myself, save for building the motor. Damn these things are expensive though.....
Thanks guys!
Thanks guys!
I cant wait to get rid of my 04 so i can grab a 5.0 and start working on it....
#8
12-06-2006, 08:35 PM
stock manifold? what kind of performance mods are we looking at here? thats what im more interested in. Looks damn nice though so far.
#9
12-06-2006, 08:49 PM
Looks great. Paint looks nice, after wetsanding and a buff job she'll be real slick. I'm liking the stereo too. Nice, clean, subtle installation. Very clean car!
#11
12-06-2006, 09:30 PM
Bone stock rebuilt motor, from intake to oil pan. Got a 65mm tb and spacer, 75mm pro m, full exhaust, 3.73's, no a/c or smog pump with short belt, cold air kit with cervini ram air box, some weight reduction, and other little bolt ons. I'm gonna see how fast she can go with a suspension, bolt ons, and a stock motor.
#15
12-07-2006, 11:52 AM
~Emilie
#17
12-07-2006, 01:53 PM
Thanks guys/gals, hope to be done soon. I've got smoked headlights and taillights. Taillights are in, I just need to get new pics, and I think i'm gonna hold off on the headlights till I wetsand and buff. Plus that silver overspray behind the headlights is getting wetsanded off.
Thread
Thread Starter
Forum
Replies
Last Post
