Modular 4.6L Tech For all your 1996-2005+ 2V, 3V, and 4V modular motor needs.

Injector Issue

Thread Tools
 
Search this Thread
 
  #1  
Old 11-09-2008, 07:43 PM
bassman97's Avatar
blank
Thread Starter
Join Date: Jun 2006
Location: North Jersey
Posts: 2,451
Default Injector Issue

Recently I replaced my O2 sensor on the passenger side up front since I was getting the P0153 code and I noticed a slight dip in mileage. Well, mileage improved but the code still won't go away. It still appears, but less often. In addition, I've been noticing the smell of raw gas while driving, especially today. Now, I have a busted cat on one side so I've been use to this smell but today it was much worse than usual. I'm thinking I may have a bad injector (already checked the MAF and will check for leaks this weekend when I'm doing the clutch). So, can someone explain to me how I would confirm if I had a bad injector?
 
  #2  
Old 11-11-2008, 06:25 AM
96blackgt54's Avatar
Senior Member
Join Date: Aug 2007
Location: Lawrenceburg,KY
Posts: 278
Default

Well I know an injector that is stuck open will read a diffrent ohm than the rest.

A dripping/bleeding injector.....not sure. I've been told some Autoparts stores can check for that. I was told NAPA.

I've also been told to replace O2's with factory stock and not the aftermarkets that are not the same brand as whitch came out.

Hope this helps
 
  #3  
Old 11-11-2008, 07:33 AM
bassman97's Avatar
blank
Thread Starter
Join Date: Jun 2006
Location: North Jersey
Posts: 2,451
Default

Well, I got the O2 from Randy but considering my mileage was improved slightly, I don't think that's the problem. However, I will check the resistances of the injectors to see what the deal is. Thanks.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Othic
The Parts Desk
1
08-01-2006 04:59 AM
Silver02GT
Modular 4.6L Tech
5
05-12-2006 04:11 PM
thundergod
Modular 4.6L Tech
12
12-31-2005 07:16 PM
Lightning247
Dyno Results
7
08-08-2005 02:35 PM
quik94gt
5.0L Tech
4
05-16-2005 04:48 PM



Quick Reply: Injector Issue



All times are GMT -7. The time now is 06:13 PM.