![]() |
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
||||||
| Modular 4.6L Tech For all your 1996-2005+ 2V, 3V, and 4V modular motor needs. |
![]() |
|
|
Thread Tools | Display Modes |
|
|
#1 (permalink) |
|
Junior Member
Join Date: Mar 2008
Location: Va
Posts: 23
|
Are 4:10s to tall for a super charger.Also some good advice on using my diablo on another mustang 4.6 2v it has all slp pipes ltubes cats and xpipe put on underdrives cai also has 4:10s and rare these days 15 inch welds been lowered 1.1/2 inches.what should i do in tuning to gain most hp possible
|
|
|
|
|
|
#2 (permalink) |
|
Senior Citizen
Join Date: Dec 2007
Location: Richmond Va.
Posts: 652
|
Welcome, are you running an auto or 5 speed? I think with the 2v you'll be fine with the 4.10s. I think most guys run 3.73s w/auto and s/c and 4.10s w/5 speed and s/c.
You can only use the Diablo on one car at a time. You have to put the factory tune back in the car before you can use it on another. I use the Diablo for my 02 GT and used the installed tune on the programmer. I feel safe with that and have had no problems with the tune. Stay with the good gas. (A MUST) I would not start changing parameters because you could do major damage. With the mods you have now I would not worry about a custom tune at this time, as you add more upgrades later a custom tune will be a must. ![]()
__________________
|
|
|
|
|
|
#3 (permalink) |
|
Junior Member
Join Date: Mar 2008
Location: Va
Posts: 23
|
The car is manual trans bought to tuners so each car has its own,thanks for the advice
|
|
|
|
|
|
#4 (permalink) |
|
Senior Citizen
Join Date: Dec 2007
Location: Richmond Va.
Posts: 652
|
Where are you at, Northern Va.?
__________________
|
|
|
|
|
|
#5 (permalink) |
|
Junior Member
Join Date: Mar 2008
Location: Va
Posts: 23
|
Im down in Fredericksburg you know any good shops around
|
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|