Mustang Forums

Go Back   Mustang Forums > Mustang Madness > Modular 4.6L Tech

Modular 4.6L Tech For all your 1996-2005+ 2V, 3V, and 4V modular motor needs.

Reply
 
Thread Tools Display Modes
Old 06-15-2005, 09:47 PM   #1 (permalink)
-dc-
Junior Member
 
Join Date: Jun 2005
Location: Los Angeles
Posts: 8
Default Ideas to dress up the new stang




ok, first things first...some asshole in a range rover about a week after I got my car decided to back into the right rear quarter panel/fender and did a number on my paint job and left a nice dent. Lucky for me it's getting fixed and his insurance covers it. The car was parked - and he said it was the fourth time he's done something like that....the 4th time this year! Grr!!!

Anyways...so got that frustration out of the way though I'm dealing with the headache of not driving my brand new car.

The point of this thread is I'd like to hear what you guys think as far as possibilities to dress up the new body style. Personally, I feel like it's begging to made into a Mach 1 or Boss 302..it could easily be done on this car.

I've seen both the saleen and roush 05's, and I gotta admit they're nice, but they're just not...jaw dropping. In fact, I'd go as far as to say the '05 roush with it's tape on hood scoop is well...almost shameful. Either make it functional or don't put it on the damn car folks...that's just my opinion though.

I took these big 20" wheels off, due to their high price tag. I just didn't feel like they were worth it, and the ride was complete crap. Once I put the 17's back on everything was great...but I lost the great look they had. I was thinking about getting the mach 1 style wheel in 18's...or the black bullitt's.

What do you think? Any ideas for what could be done? Any opinions on what's already available?
-dc- is offline   Reply With Quote
Old 06-16-2005, 04:48 PM   #2 (permalink)
Jack The Ripper
 
Posts: n/a
Default

Dunno bout BOSS 302, isnt the 302 the displacement? it would be more like a BOSS 281. I think the boss stripes would look sweet on that, but you would have to remove the rallys, but that is pretty easy. an hour with a $14.00 con-air hair dryer from wallmart and they are history.

That is one nice lookin ride, too bad bout the range rover. I hate those big ass stupid minivans that they claim are SUV's. These morons go out and buy em and they cant even drive through a parking lot without scratching up other peoples rides. Then they feel the need to tailgate everyone on the road, and when you have to slam on yer brakes they run right into you cause thier stopping ability is next to pathetic.

Like the H2. Give me a break, it is nothing more than a Tahoe with a hidious body kit, we have those ugly monstrositys all over denver.
  Reply With Quote
Old 06-16-2005, 06:54 PM   #3 (permalink)
mike sweeney
Senior Gear Banger
 
Join Date: Sep 2004
Location: Two Harbors, MN.
Posts: 230
Default

You have one of the nicest 05's I have seen!!! Leave the stripes theyre awesome. Mabye get the Boss 429 hood scoop that MRT put on their "Interceptor" 05 SEMA show car.
__________________
2004 Torch Red GT
Flowmaster Am.Thunder cat back, SLP Mid Pipe
Steeda Underdrive pulleys
3.73 gears
Diablosport Predator tune
Grille Delete and Mach 1 spoiler
Rear Wing delete
Mustang Tuning Shifter
Bullitt Handling Kit
mike sweeney is offline   Reply With Quote
Old 06-16-2005, 09:40 PM   #4 (permalink)
-dc-
Junior Member
 
Join Date: Jun 2005
Location: Los Angeles
Posts: 8
Default

hey thanks for the props guys!

Funny how getting hit can turn out to be a convienent thing...I asked the body shop if they could install some accessories for me, sinch they'll be fixing the paint and such. They said they'd be happy to do it, and they'd only charge me for the labor, since the paint will already be there - sweetness!

I was thinking of getting the side window louvers from roush, though I like the street scene ones because they look more retro, the roush ones look more flush (probably one of the few pieces on the roush kit I like).

Mike, do you have a link for that hood scoop by any chance? I'll go poking around for it and post one if I can find it.

edit: here's the link

http://www.mrt-direct.com/Project%20...05release.html

I like the hood scoop...looking into it now.

BOSS 281...hmm, I like the idea!
-dc- is offline   Reply With Quote
Old 06-17-2005, 04:55 AM   #5 (permalink)
venom
Super Moderator
 
venom's Avatar
 
Join Date: Sep 2004
Posts: 5,329
Default

How about the chin spoiler its all here http://mrt-direct.com/2005/Pages/frtaccess.php
venom is offline   Reply With Quote
Old 06-17-2005, 08:16 PM   #6 (permalink)
mike sweeney
Senior Gear Banger
 
Join Date: Sep 2004
Location: Two Harbors, MN.
Posts: 230
Default

I think a set of black FR 500 wheels would look great on your car. Mabye with a polished lip. 05's definitley need atleast 18 inch wheels to look right, I think 17's look too small.
__________________
2004 Torch Red GT
Flowmaster Am.Thunder cat back, SLP Mid Pipe
Steeda Underdrive pulleys
3.73 gears
Diablosport Predator tune
Grille Delete and Mach 1 spoiler
Rear Wing delete
Mustang Tuning Shifter
Bullitt Handling Kit
mike sweeney is offline   Reply With Quote
Old 06-17-2005, 10:25 PM   #7 (permalink)
-dc-
Junior Member
 
Join Date: Jun 2005
Location: Los Angeles
Posts: 8
Default

I like the chin spoiler - I may go for that on my car. The hood scoop doesn't have a price yet, unfortunately.

I like the FR500's, especially in black. I've been keeping my eye out for a good 18" wheel/tire combo deal. I'll probably wait for the price to drop.

Has anyone seen these yet?

http://cgi.ebay.com/ebaymotors/ws/eB...sPageName=WDVW

They look good, too bad they're not in black yet...I really like the rivets, nice touch on those wheels for sure.

Jury's still out for me on the louvers. I may hold off on them. Not sure what I'm going to do first yet!

btw, LM performance has the most products available for 2005 owners that I've been able to find thusfar. Here's a link to their exterior add-ons:

http://www.lmperformance.com/c/8/73.html
-dc- is offline   Reply With Quote
Old 06-17-2005, 11:14 PM   #8 (permalink)
venom
Super Moderator
 
venom's Avatar
 
Join Date: Sep 2004
Posts: 5,329
Default

They look similar to Dodgr SRT 10 wheels then again almost all wheel are looking the same nowadays but you have to see them on.
venom is offline   Reply With Quote
Old 06-17-2005, 11:15 PM   #9 (permalink)
venom
Super Moderator
 
venom's Avatar
 
Join Date: Sep 2004
Posts: 5,329
Default

Here are the Dodge Clones.
venom is offline   Reply With Quote
Old 06-17-2005, 11:18 PM   #10 (permalink)
venom
Super Moderator
 
venom's Avatar
 
Join Date: Sep 2004
Posts: 5,329
Default

Here is the stock ones on the truck,
venom is offline   Reply With Quote
Old 06-18-2005, 01:03 AM   #11 (permalink)
MattJ
Senior Member
 
MattJ's Avatar
 
Join Date: Dec 2004
Location: Racine, WI
Posts: 10,243
Send a message via AIM to MattJ
Default

deffienetly go 18+ on the 05... they sit so well. If you can find 19s, I really think thats the way to go on the 05s! I dont like those dodge knockoffs..
MattJ is offline   Reply With Quote
Old 06-18-2005, 06:05 AM   #12 (permalink)
venom
Super Moderator
 
venom's Avatar
 
Join Date: Sep 2004
Posts: 5,329
Default

I dont like them either.
venom is offline   Reply With Quote
Old 06-18-2005, 12:06 PM   #13 (permalink)
-dc-
Junior Member
 
Join Date: Jun 2005
Location: Los Angeles
Posts: 8
Default

hmm, now that I know they're just dodge knockoffs I definitely don't want them. I'll be going with the FR500's for sure...unless something else grabs me.

what do you guys think of this hood?



"RKSport Mustang California Dream Ram Air Hood 2005+
PRE-SALE PRICE - Following the lines of the Mustang hood, our engineers designed the California Dream Hood. The Hood is functional bringing fresh, cool air directly into the inlet for increased airflow and performance. The California Dream Hood is crafted from hi-temp, hand laid fiberglass for exceptional strength and durability. Installation is straightforward using the stock hardware."

Here's another one from the same company...



They're both priced around $700 + shipping.
-dc- is offline   Reply With Quote
Old 06-18-2005, 12:56 PM   #14 (permalink)
silvergt
Speed Racer
 
silvergt's Avatar
 
Join Date: Apr 2005
Posts: 203
Default

well it appears to be functional with the air vent which is a step up from my 2001 hood scoop, so thats a plus!
__________________
'01 GT 4r70w
silvergt is offline   Reply With Quote
Old 06-18-2005, 07:01 PM   #15 (permalink)
venom
Super Moderator
 
venom's Avatar
 
Join Date: Sep 2004
Posts: 5,329
Default

Did you see the latest issue of MMFF Xenon is making the concept body kit for your stang that ford had in the Auto Show.
venom is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
the word "the" Randy Stinchcomb The Lounge 11 12-27-2006 06:00 PM
Noob 02stangfire New Members! 9 11-22-2005 09:50 PM
Newbie T2RACING The Lounge 8 10-30-2005 06:27 PM
rumor cobra4123 The Lounge 52 09-30-2005 09:00 AM
springs buddyabe General Tech Forum 7 02-10-2005 10:00 PM



Ad Management by RedTyger

SEO by vBSEO 3.0.0

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48