Bellhouseing question on 3650 to t56

sidekicksurfer · 10-07-2007, 10:27 AM

Do you have to switch out the bellhousing if your swapping from a 3650 to a t56 tranny? OR does everything pretty much hook up?

bassman97 · 10-07-2007, 05:57 PM

Bellhousing pattern is the same, just make sure you have the bellhousing for the T56 since the one on the TR3650 is made only for that trans as far as I know.

spike_africa · 10-07-2007, 08:16 PM

That and the bell housing on the 3650 is part of the tranny and doesn't come off. You need an bell housing for the 4.6 for the T56.

sidekicksurfer · 10-09-2007, 05:30 AM

ok thanks guys

bassman97 · 10-09-2007, 07:32 AM

Well, it does come off, just the bolts are on the inside of the bellhousing. Either way though, it wouldn't work a/ a T56.

spike_africa · 10-09-2007, 06:38 PM

Quote:

Originally Posted by bassman97

Well, it does come off, just the bolts are on the inside of the bellhousing. Either way though, it wouldn't work a/ a T56.

What.. am i blind i didn't see bolts on the inside of my bell housing.

bassman97 · 10-09-2007, 07:44 PM

This is from what I heard, that the bolts are on the inside.

10-07-2007, 10:27 AM	#1 (permalink)
sidekicksurfer Member Join Date: Aug 2007 Posts: 47	Bellhouseing question on 3650 to t56 Do you have to switch out the bellhousing if your swapping from a 3650 to a t56 tranny? OR does everything pretty much hook up?

10-07-2007, 08:16 PM	#3 (permalink)
spike_africa Administrator Join Date: Sep 2004 Location: Orlando,Florida Posts: 7,339	That and the bell housing on the 3650 is part of the tranny and doesn't come off. You need an bell housing for the 4.6 for the T56. __________________ Dustin 2002 GT Mustang 5-Speed Drag Radials,Sprayed,Powershifted WOOO HOOOO!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-07-2007, 05:57 PM	#2 (permalink)
bassman97 blank Join Date: Jun 2006 Location: North Jersey Posts: 1,481	Bellhousing pattern is the same, just make sure you have the bellhousing for the T56 since the one on the TR3650 is made only for that trans as far as I know.

10-09-2007, 05:30 AM	#4 (permalink)
sidekicksurfer Member Join Date: Aug 2007 Posts: 47	ok thanks guys

10-09-2007, 07:32 AM	#5 (permalink)
bassman97 blank Join Date: Jun 2006 Location: North Jersey Posts: 1,481	Well, it does come off, just the bolts are on the inside of the bellhousing. Either way though, it wouldn't work a/ a T56.

10-09-2007, 07:44 PM	#7 (permalink)
bassman97 blank Join Date: Jun 2006 Location: North Jersey Posts: 1,481	This is from what I heard, that the bolts are on the inside.