Mustang Boards

Mustang Boards (/)
-   Modular 4.6L Tech (https://mustangboards.com/modular-4-6l-tech/)
-   -   headlight switch removal question (https://mustangboards.com/modular-4-6l-tech/10370-headlight-switch-removal-question.html)

americanstang 03-02-2006 02:55 PM

headlight switch removal question
 
hows it goin everyone, i am installing a new dash on my 1998 gt and i was wondering how to get the headlight switch off, does a cap pop off or somehting cuz i cant figure it out for the life of me hit me back up and save me

FritoBandito 03-02-2006 03:10 PM

If its the same as the 99-04s,

1. pull the light knob outward (turn them on)
2. Insert a small flat screwdriver in slot at rear of knob. There will be a metal tang, pull it forward.
3. As you are doing #2, pull on the whole knob, it should pop right off.

BlitzStyrke 03-02-2006 06:57 PM

I think i just pulled the thing off when I took mine off a few times. Takes a little force. Might want to try to screwdriver thing first though.

floppy 03-02-2006 09:05 PM


Originally Posted by FritoBandito
If its the same as the 99-04s,

1. pull the light knob outward (turn them on)
2. Insert a small flat screwdriver in slot at rear of knob. There will be a metal tang, pull it forward.
3. As you are doing #2, pull on the whole knob, it should pop right off.


hahaha, good luck using a screw driver... you cut and pasted didnt you... seriously its a bitch to get that piece off. get like a bent nail or something with a little bit of a hook because you have to pull the little metal piece out towards you.. cant do it with a screwdriver because that will only push it up, not out. get something you can pull it out away from the shaft.

stanger00 03-02-2006 09:53 PM

i just yanked mine out.

FritoBandito 03-03-2006 06:01 AM


Originally Posted by floppy
hahaha, good luck using a screw driver... you cut and pasted didnt you... seriously its a bitch to get that piece off. get like a bent nail or something with a little bit of a hook because you have to pull the little metal piece out towards you.. cant do it with a screwdriver because that will only push it up, not out. get something you can pull it out away from the shaft.


I just used one of those tiny flat head screwdrivers and braced it with a box knife so I wouldn't scratch the dash. It came off in less than 2 secs.

spike_africa 03-04-2006 07:41 PM

on mine you have to use a small item (aka anything small enough to fit in) and push the metal tab down and pull the nobe off.

tripleblack 03-05-2006 01:55 PM

broke it
 
I'm the patient type, so I tried for 30 minutes without success before I gave up and destroyed the plastic knob (I was installing a billet item anyway).

After removal I saw the spring metal tab everyone's talking about. I believe its not really meant to work, just make you mad.

Actually, all the advice here looks good - I've now got a small, cheap little screwdriver I bent into a hook shape that does the job like magic.

...though I kinda enjoyed wrecking that plastic know. Catharctic.

OFFdutyHERO 03-05-2006 05:12 PM

I painted my interior pieces, and all i had to do was pull it off. It took a lil force, but not much. Then it just slips back on.


All times are GMT -7. The time now is 04:36 AM.


© 2024 MH Sub I, LLC dba Internet Brands