Help me out, Will these wheels look good?

94StangGTVert · 10-19-2005, 08:31 PM

Ok so these are the wheels off of my old car. I just bought them before the car took a crap on me. So I would really like to use them. Let me know what you think.

A quick and sloppy PS of wheels and lowering. Of course, I wouldnt lower it that much. I was just messin around.

You think I should put em on?!

MattJ · 10-19-2005, 08:39 PM

One way to find out, put em on and see. They dont look too bad...

94StangGTVert · 10-19-2005, 08:46 PM

I suppose I'm gonna put em on lol, maybe tomorrow. I bought some rubber undercoating for my frame and wheel wells while I have my wheels off. I gotta get the voxx wheels cleaned up as well. Thanks for the input.

rebelyell · 10-19-2005, 10:26 PM

IMHO. It don't look like there is a lot of meat holding those babies together. Kinda like old keystones were back in the day. The were notorious for breakage. But then again old keystones were cheap chrome cast alloy. I wouldn't trust em..

Those wheels were probably engineered for maximum strength though. Now that I look at em closer. I'm sure they tested them under extreme forces.

Beer_farts · 10-19-2005, 10:44 PM

They dont look bad at all , put em on.

*Lances03SVT* · 10-20-2005, 03:30 AM

Yea give them a try and just see how they look.

10-20-2005, 06:56 AM

I think you should sell them and get something like this

94StangGTVert · 10-20-2005, 07:23 AM

Yeah then I'll throw some hyrdos on it too...Maybe do the interior in suede and skulls. A nice gold chain steering wheel.

10-20-2005, 07:37 AM

that would be badass

FritoBandito · 10-20-2005, 07:58 AM

Those 200 spoke dayton 13's are phat yo!

94StangGTVert · 10-20-2005, 07:58 AM

Ghetto Fabulous

*madmatt* · 10-20-2005, 11:43 AM

Put em on, I think theyll look great.

94StangGTVert · 10-20-2005, 11:51 AM

I got em all cleaned up, Im waiting on Triumph Auto Glass to get here and put me in a new driver's door window then I'll probably bolt em on, I just hope my aftermarket lugs are gonna fit. If not, I'll have to hope my stock lugs fit with my wheels.

Grimmz · 10-20-2005, 02:10 PM

Quote:

Originally Posted by SpinMedia

that would be badass

LoL thats Money bro

94StangGTVert · 10-20-2005, 05:47 PM

Got my wheels on, Here's the thread

10-19-2005, 08:31 PM	#1 (permalink)
94StangGTVert LED Dash conversion FTW! Join Date: Oct 2005 Location: Ohio Posts: 247	Help me out, Will these wheels look good? Ok so these are the wheels off of my old car. I just bought them before the car took a crap on me. So I would really like to use them. Let me know what you think. A quick and sloppy PS of wheels and lowering. Of course, I wouldnt lower it that much. I was just messin around. You think I should put em on?! __________________

10-19-2005, 08:39 PM	#2 (permalink)
MattJ Senior Member Join Date: Dec 2004 Location: Racine, WI Posts: 10,243	One way to find out, put em on and see. They dont look too bad... __________________ 2001 Mustang GT Premium - Mineral Grey

10-19-2005, 08:46 PM	#3 (permalink)
94StangGTVert LED Dash conversion FTW! Join Date: Oct 2005 Location: Ohio Posts: 247	I suppose I'm gonna put em on lol, maybe tomorrow. I bought some rubber undercoating for my frame and wheel wells while I have my wheels off. I gotta get the voxx wheels cleaned up as well. Thanks for the input. __________________

10-19-2005, 10:26 PM	#4 (permalink)
rebelyell unofficial philosopher Join Date: Oct 2004 Location: Fayetteville, NC Posts: 1,846	IMHO. It don't look like there is a lot of meat holding those babies together. Kinda like old keystones were back in the day. The were notorious for breakage. But then again old keystones were cheap chrome cast alloy. I wouldn't trust em.. Those wheels were probably engineered for maximum strength though. Now that I look at em closer. I'm sure they tested them under extreme forces. __________________ 2004 Torch Red GT Mach 1 Chin Spoiler "4.6 L V8" Side Stripes Mach 1 Hood stripe Black shorty antenna Flowmaster catbacks

10-20-2005, 03:30 AM	#6 (permalink)
Lances03SVT Super Moderator Join Date: May 2005 Location: Carthage, Missouri Posts: 9,246	Yea give them a try and just see how they look. __________________ _______________________ 2003 Cobra SOLD

10-19-2005, 10:44 PM	#5 (permalink)
Beer_farts Senior Member Join Date: Mar 2005 Location: Maryland Posts: 138	They dont look bad at all , put em on.

10-20-2005, 06:56 AM	#7 (permalink)
SpinMedia Posts: n/a	I think you should sell them and get something like this

10-20-2005, 07:23 AM	#8 (permalink)
94StangGTVert LED Dash conversion FTW! Join Date: Oct 2005 Location: Ohio Posts: 247	Yeah then I'll throw some hyrdos on it too...Maybe do the interior in suede and skulls. A nice gold chain steering wheel. __________________

10-20-2005, 07:37 AM	#9 (permalink)
SpinMedia Posts: n/a	that would be badass

10-20-2005, 07:58 AM	#10 (permalink)
FritoBandito Married. Join Date: Jun 2005 Location: OK Posts: 1,234	Those 200 spoke dayton 13's are phat yo! __________________ 2004 OXFORD GT Parts that matter:K&N,O/R-H,Flow 40's,Xcal2,FRPP 4.10s, Bullitt Susp. kit

10-20-2005, 07:58 AM	#11 (permalink)
94StangGTVert LED Dash conversion FTW! Join Date: Oct 2005 Location: Ohio Posts: 247	Ghetto Fabulous

10-20-2005, 11:43 AM	#12 (permalink)
madmatt Traitor...lol Join Date: Sep 2004 Location: Lexington, SC Posts: 7,929	Put em on, I think theyll look great. __________________ RPMPlanets

10-20-2005, 11:51 AM	#13 (permalink)
94StangGTVert LED Dash conversion FTW! Join Date: Oct 2005 Location: Ohio Posts: 247	I got em all cleaned up, Im waiting on Triumph Auto Glass to get here and put me in a new driver's door window then I'll probably bolt em on, I just hope my aftermarket lugs are gonna fit. If not, I'll have to hope my stock lugs fit with my wheels. __________________

10-20-2005, 05:47 PM	#15 (permalink)
94StangGTVert LED Dash conversion FTW! Join Date: Oct 2005 Location: Ohio Posts: 247	Got my wheels on, Here's the thread __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
COP issue	Icefreezen	General Tech Forum	8	11-25-2006 07:22 AM
which is better for headers	s281 saleen #230	Modular 4.6L Tech	13	07-31-2006 03:26 PM
cold air intake	sk84life	V6 Tech Forums	5	04-18-2006 04:56 AM
Need Help!!!	GREG@94GT	5.0L Tech	5	04-09-2006 08:19 PM
newb from florida	Mitchs98v6	New Members!	6	12-16-2005 01:17 PM