Mach 1 chin spoiler

PureStang · 10-07-2005, 09:58 PM

just ordered a mach 1 chin spoiler from V6mustangstuff.com...man its freaking expensive!! $110.34 shipped...its a $10 piece of plastic/rubber...thats rediculious...but w/e..there the only place that has them in stock still....sould look good when i put it on....should look even better when i get my grille delete kit.

shad0ws · 10-07-2005, 10:19 PM

I think I'm a spring whore not like the other gusy because that monster truck in your sig needs to be lowered first. SPRINGS!!!

PureStang · 10-07-2005, 10:28 PM

Quote:

Originally Posted by shad0wsGT

I think I'm a spring whore not like the other gusy because that monster truck in your sig needs to be lowered first. SPRINGS!!!

its only cause of the lighting...and i was also standing on steps that lead to my house....so im higher than wat i normally stand (5'9")....i cant order anything until christmas...my mom doesnt know that i ordered the chin spoiler and i only have like a $400 spending limit on my credit card....so im already at around 200 from this...and some food i had during the week....ill need the rest for gas...

also i showed my one friend who is a spring whore more than anyone i know of....(he droped his coupe 4") that pic then i showed him in person and he said it wasnt as bad as the pic....so yea....like they say...the camera adds 10lbs to the figure

csledd · 10-08-2005, 04:18 AM

did you check at your local Ford dealer for a chin spoiler? I called one and they said like $80 and I could pick it up. I ended up getting it for $55 because I have a connection and a different dealer

*madmatt* · 10-08-2005, 05:17 AM

Thats rediculous. Can we say price gouge? Six months ago, mine wasnt even 50 bucks...thats awful.

*4.6 Love* · 10-08-2005, 08:31 AM

Chin spoilers are overrated!

MattJ · 10-08-2005, 09:45 AM

Quote:

Originally Posted by 4.6 Love

Chin spoilers are overrated!

They dont do much justice on black. Its more for the other colors.

*4.6 Love* · 10-08-2005, 09:46 AM

Quote:

Originally Posted by MattJ

They dont do much justice on black. Its more for the other colors.

DOn't ever drop your car more than 2" and expect to have a nice looking chin spoiler!

MattJ · 10-08-2005, 09:51 AM

ive got a bend in the corner of mine from diagnal parking and those blocks...

*Randy Stinchcomb* · 10-08-2005, 10:40 AM

Quote:

Originally Posted by PureStang

just ordered a mach 1 chin spoiler from V6mustangstuff.com...man its freaking expensive!! $110.34 shipped...its a $10 piece of plastic/rubber...thats rediculious...but w/e..there the only place that has them in stock still....sould look good when i put it on....should look even better when i get my grille delete kit.

wow, you paid waaay tooo much, we sell them for @$65.00 wth hardware + shipping

Ghostalker · 10-08-2005, 12:07 PM

y didn't u get it at ford they sell them for 87 $

foncarelli · 10-08-2005, 12:42 PM

Quote:

Originally Posted by MattJ

ive got a bend in the corner of mine from diagnal parking and those blocks...

Yeah me too, on the drivers side.

*madmatt* · 10-08-2005, 12:43 PM

Mines still in pretty good shape with the steeda sports. Now that we bring it up, Ill prolly rip it off tonight...

*Lances03SVT* · 10-08-2005, 12:43 PM

Quote:

Originally Posted by Randy Stinchcomb

wow, you paid waaay tooo much, we sell them for @$65.00 wth hardware + shipping

Once people see that you sell them that cheap you will have alot of orders from guys around here.

foncarelli · 10-08-2005, 01:17 PM

Quote:

Originally Posted by Lances03GT

Once people see that you sell them that cheap you will have alot of orders from guys around here.

Randy's a new member on these boards(11 posts)... He is a very popular guy in the parts department. Good to see him around ... umm discount for the plug.

Ghostalker · 10-08-2005, 01:28 PM

where can i oprder one form u u have a webber net site

10-10-2005, 11:35 AM

I got mine at a ford dealership.
They do not understand CHIN SPOILER, ask for the 02 front bumper valance, they can find it.
Yes, i know, no mach1's in 02, none the less they have it cause i ordered it and it is now on my car. Trust me, get the 02 version, it is identical to the 03 but costs way less, i paid about 75 shipped, the 03 version was about 115 shipped.

*Randy Stinchcomb* · 10-10-2005, 11:59 AM

Quote:

Originally Posted by Ghostalker

where can i oprder one form u u have a webber net site

you can either reach mr thru the "parts forum" over at www.ModularDepot.com or just call me direct at 410-655-2000 parts ext 5618

PureStang · 10-11-2005, 12:00 PM

for those who installed their own...did you have to drill the bumper?....im just wondering cause when i did a fit test there wernt any holes in the bumber...just the chin spoiler did

10-11-2005, 12:06 PM

Quote:

Originally Posted by PureStang

for those who installed their own...did you have to drill the bumper?....im just wondering cause when i did a fit test there wernt any holes in the bumber...just the chin spoiler did

Yes you have to drill it.

Get yer car either on jacks or a ramp, then take some painters tape or masking tape (dict tape is a bad idea on this trust me) and tape the spoiler into place, once you have it lined up with tape start drilling and inserting the plastic fasteners. Mine only came with 3 fasteners, i had to go to Checker Auto to pick up more of them. Once it is drilled and fastened, remove tape and lower the car back down.

PureStang · 10-11-2005, 12:12 PM

Quote:

Originally Posted by slappy

Yes you have to drill it.

Get yer car either on jacks or a ramp, then take some painters tape or masking tape (dict tape is a bad idea on this trust me) and tape the spoiler into place, once you have it lined up with tape start drilling and inserting the plastic fasteners. Mine only came with 3 fasteners, i had to go to Checker Auto to pick up more of them. Once it is drilled and fastened, remove tape and lower the car back down.

ok sounds good...i cant do that until thursday for i have work and school all week (well high school all week )

10-11-2005, 01:18 PM

and i suggest getting a friend to help, makes it a lot easier, I got some beer and got my dad to hold it tight that way it wouldn't move at all while i was drilling, because the tape would still make it wobble.

Grimmz · 10-11-2005, 01:57 PM

yeah my boy just installed one on his White GT back home. I had him get another friend to help him...also when you install it make sure you put it about a 1/8 of an inch inside the bumper, because if you look on the real mach 1's they're is actually pushed in a lil bit so it looks more flush, also make sure everything fits perfect before drillin, you only got once chance most of the time...

PureStang · 10-11-2005, 06:10 PM

Quote:

Originally Posted by Grimmz

yeah my boy just installed one on his White GT back home. I had him get another friend to help him...also when you install it make sure you put it about a 1/8 of an inch inside the bumper, because if you look on the real mach 1's they're is actually pushed in a lil bit so it looks more flush, also make sure everything fits perfect before drillin, you only got once chance most of the time...

yea im going over a friends place to do a valve adjustment on his car then im using his ramps to do my bumper

10-07-2005, 09:58 PM	#1 (permalink)
PureStang WE ARE PENNSTATE Join Date: Jul 2005 Location: Downingtown/West Chester, PA Posts: 4,879	Mach 1 chin spoiler just ordered a mach 1 chin spoiler from V6mustangstuff.com...man its freaking expensive!! $110.34 shipped...its a $10 piece of plastic/rubber...thats rediculious...but w/e..there the only place that has them in stock still....sould look good when i put it on....should look even better when i get my grille delete kit. __________________ Brandon J My Ride sig by purestang

10-07-2005, 10:19 PM	#2 (permalink)
shad0ws vDUB Join Date: Aug 2005 Posts: 1,468	I think I'm a spring whore not like the other gusy because that monster truck in your sig needs to be lowered first. SPRINGS!!! __________________

10-08-2005, 04:18 AM	#4 (permalink)
csledd DSG!!! Join Date: Feb 2005 Location: Paducah, KY Posts: 3,074	did you check at your local Ford dealer for a chin spoiler? I called one and they said like $80 and I could pick it up. I ended up getting it for $55 because I have a connection and a different dealer __________________ CAP DSG Registry 2003 Mustang GT - daily driven check out my cardomain for more info 296 rwhp / 310 rwtq Money spent @ AM: $4623.20 1984 Mustang Hatch - low budget project

10-08-2005, 05:17 AM	#5 (permalink)
madmatt Traitor...lol Join Date: Sep 2004 Location: Lexington, SC Posts: 7,922	Thats rediculous. Can we say price gouge? Six months ago, mine wasnt even 50 bucks...thats awful. __________________ RPMPlanets

10-08-2005, 08:31 AM	#6 (permalink)
4.6 Love Super Moderator Join Date: Sep 2004 Location: Mexico Posts: 6,145	Chin spoilers are overrated! __________________ Go Cowboys! X pipe and flows

10-08-2005, 09:51 AM	#9 (permalink)
MattJ Senior Member Join Date: Dec 2004 Location: Racine, WI Posts: 10,243	ive got a bend in the corner of mine from diagnal parking and those blocks... __________________ 2001 Mustang GT Premium - Mineral Grey

10-08-2005, 12:07 PM	#11 (permalink)
Ghostalker BOLO 4 ME Join Date: Dec 2004 Location: Danbury, CT Posts: 2,285	y didn't u get it at ford they sell them for 87 $ __________________ Ghosty is in need of some mods...

10-08-2005, 12:43 PM	#13 (permalink)
madmatt Traitor...lol Join Date: Sep 2004 Location: Lexington, SC Posts: 7,922	Mines still in pretty good shape with the steeda sports. Now that we bring it up, Ill prolly rip it off tonight... __________________ RPMPlanets

10-08-2005, 01:28 PM	#16 (permalink)
Ghostalker BOLO 4 ME Join Date: Dec 2004 Location: Danbury, CT Posts: 2,285	where can i oprder one form u u have a webber net site __________________ Ghosty is in need of some mods...

10-10-2005, 11:35 AM	#17 (permalink)
Jack The Ripper Posts: n/a	I got mine at a ford dealership. They do not understand CHIN SPOILER, ask for the 02 front bumper valance, they can find it. Yes, i know, no mach1's in 02, none the less they have it cause i ordered it and it is now on my car. Trust me, get the 02 version, it is identical to the 03 but costs way less, i paid about 75 shipped, the 03 version was about 115 shipped.

10-11-2005, 12:00 PM	#19 (permalink)
PureStang WE ARE PENNSTATE Join Date: Jul 2005 Location: Downingtown/West Chester, PA Posts: 4,879	for those who installed their own...did you have to drill the bumper?....im just wondering cause when i did a fit test there wernt any holes in the bumber...just the chin spoiler did __________________ Brandon J My Ride sig by purestang

10-11-2005, 01:18 PM	#22 (permalink)
SpinMedia Posts: n/a	and i suggest getting a friend to help, makes it a lot easier, I got some beer and got my dad to hold it tight that way it wouldn't move at all while i was drilling, because the tape would still make it wobble.

10-11-2005, 01:57 PM	#23 (permalink)
Grimmz Jack Touched Me...I Cried Join Date: Aug 2005 Location: Tallahassee, FL/ Gaithersburg, MD Posts: 3,751	yeah my boy just installed one on his White GT back home. I had him get another friend to help him...also when you install it make sure you put it about a 1/8 of an inch inside the bumper, because if you look on the real mach 1's they're is actually pushed in a lil bit so it looks more flush, also make sure everything fits perfect before drillin, you only got once chance most of the time... __________________ 2003 Manual V6 "ETHEL" My CarDomain::Updated 12/31/05:: Engine Start-Up, Rev,and Walk Around , Drive By 3.8 Mustang Forum Exhaust's DSG Registry #0032 Props to Slither for the Sig!!!