stanger00

first off i got there at 7 pm and i didnt stage until 830. made my first pass and with 16 psi in the 315's i flashed the convertor on the third light spun the crap out of the tires lifted a lil bit 2.1 was the 60 8.3 1/8th and finished with a 12.7 at 114. second pass came at 10 pm waited in a huge line of cars same pressure this time stalled the convertor at 2300 tires wanted to break loose spun at first lifted and got back into quickly and with a 2.0 60 8.1 1/8th lost some rpms at the 1000 ft mark converter slipped or something and still finished with a 12.5 at 114. last time i was at the track in november with the stock tranny and 275 dr's i got a 12.5 at 114. i probably went slower tonight becuase the tires didnt hook.

yes good times but i need to be at low 12's not mid. im going to look into a new convertor and some suspension. im getting a vibration from the tranny tunnel at highway speeds. o well not going to the track till i get some more suspension mods doesnt look like i will break through the 12.5 barrier.

__________________

spike_africa

well you got a nice ass miles per hour going for ya which is nice

what all mods do you have anyhow?

__________________
Dustin

2002 GT Mustang 5-Speed
Drag Radials,Sprayed,Powershifted


WOOO HOOOO!

stanger00

stock control UCA and LCA, pro kit springs, bullitt shocks struts, 3200 stall single disk, built tranny, 373's. thats about it besides the mongoose vortech kit with paxton a/a intercooler. i figure if i get drag shocks, UCA's,LCA's, and sub frames i should be set for a lower ET but traction will still be a issue with the 315's or my 275/40 DR's. im out of time to do all this now i leave the country in 2 months and i wont see the car till 07.

do you know why the convertor slipped at 5500?

__________________

spike_africa

because its a single disc and you have a power adder, you should of gotten a multi disk they are made for power adders. more then likly you are over power the convertor.

__________________
Dustin

2002 GT Mustang 5-Speed
Drag Radials,Sprayed,Powershifted


WOOO HOOOO!

jeredan2003

Seems like all these vortech blown cars have a hard time gettin past mid 12's......

__________________
2003 DSG GT 5-speed
Hellion 62mm and Flowmaster catback.....

My bonestock 2v engine had been through 2 years of NX 100 shot, 3 years running 8-12lbs vortech s-trim, got into boost daily while racing on the weekends, had 157,000 miles on it, and was running like new

stanger00

cant hook up at all. if i baby it i will still get a 12.5 or higher. looks like im stuck until i get a new convertor and suspension.

__________________