Lowering..

BoBs · 04-04-2005, 12:44 PM

Hello, I was looking into lowering my mustang, its a 94, i was thinking about getting the steeda springs, which says it should lower it about 1", i have 17" wheels, i dont think it will rub but if anyone thinks otherwise let me know, also i am wondering if the springs is all i need to lower it... and how much ride quality will i loose??, already lost some due to the low pro tires.

04-04-2005, 01:48 PM

most people claim the ride quality increases.
And no, they shouldnt rub if you go down just an inch

mgar22 · 04-05-2005, 09:16 AM

My friend has a '98 (same bodystyle) and he has 18 x 10's with the Eibach Prokit springs, and they don't rub at all. It's about a 1.5" lower, maybe 2", not sure. And springs is all you need to lower the car. Your ride will be noticably stiffer. With low pro tires and lowering springs, you will definitely feel all the bumps, but not so much that it is unbearable, IMO.

04-04-2005, 12:44 PM	#1 (permalink)
BoBs Junior Member Join Date: Apr 2005 Posts: 10	Lowering.. Hello, I was looking into lowering my mustang, its a 94, i was thinking about getting the steeda springs, which says it should lower it about 1", i have 17" wheels, i dont think it will rub but if anyone thinks otherwise let me know, also i am wondering if the springs is all i need to lower it... and how much ride quality will i loose??, already lost some due to the low pro tires.

04-05-2005, 09:16 AM	#3 (permalink)
mgar22 Garmonbozia!! Join Date: Oct 2004 Location: Dallas, TX Posts: 167	My friend has a '98 (same bodystyle) and he has 18 x 10's with the Eibach Prokit springs, and they don't rub at all. It's about a 1.5" lower, maybe 2", not sure. And springs is all you need to lower the car. Your ride will be noticably stiffer. With low pro tires and lowering springs, you will definitely feel all the bumps, but not so much that it is unbearable, IMO. __________________ 2000 Mustang GT Cpe: Black on Black, Saleen Rep wheels: 18x9 Frnt, 18X10 Rear (MT), Eibach Prokit springs, Mac Prochamber, Flowmaster, 3.90 Motives (MT), Xcalibrator 2 (custom tuned), C&L Plenum/Mac 75mm TB, Steeda UDP's. 2000 Suzuki GSXR 600: Jet Kit (Stage 1) Micron full exhaust

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
could i?	m0nkeh	The Lounge	24	03-14-2006 10:11 AM
squirters..	Tony	5.0L Tech	7	03-04-2006 08:46 PM
What my car did with the novi2k	Stevoneo	Videos	4	02-11-2006 04:40 PM
8 or 14 inch????	95STANG	The Lounge	8	02-07-2006 05:04 PM
hps pads are they in stock?	stanger00	AmericanMuscle	1	01-21-2006 03:19 PM

04-04-2005, 01:48 PM	#2 (permalink)
Jack The Ripper Posts: n/a	most people claim the ride quality increases. And no, they shouldnt rub if you go down just an inch