Nate101

Hey,

I am currently trying to take off my Upper Intake Manifold on a 302. I have taken about 4-5 bolts out and took the EGT off, I have also disconnected the throttle from the intake. I was wondering am I missing a bolt because I can move it side to side a little just can't lift it up. I have also looked through 2 manuals and each time they were either showing a different engine or they were working on the lower manifold.


Thank you,
~Nate

Nate101

EGR** can't edit post for some reason

cobra331

been a while since i pulled a stock intake but should be 6 bolts, 2 in front, 2 long bolts under the plate, and 2 in back at firewall, disconnect vac lines from under the back and pull up.

__________________
331 stroker (D.S.S. kit) 532 lift cam w/ 1.7 rockers, GT 40 heads 194/160 valves, shaved, ports raised, reangled & opened ALOT!!!!, EFI spyder 2 intake (ports opened here too), 75 mm throttle body, 24 lbs injectors, 255 lph pump, adjustable reg., all MSD ign., egual length headers, off road H pipe, flowmasters, 3:73 gears, and a whole lot more. spent a year and alot of money to get every oil clearance, cc's, and ratio in every cyl. exactly correct.

Nate101

ahh ty I had forgotten about the ones under the plate lol

Thanks,
Nate