First Upgrades
Hey guys, I just joined and I was wondering what mods I should do first. I have around 500 dollars (give or take) and want the most HP for my money. I have done a little research but still don't know much. I was ready to order the V6 cold air intake for my 2000 mustang but they stoped selling it. (was the 70 dollar one). Any ideas for me?
Thanks, Ralo |
get some gears probably 4.10's (3.73 if you plan on doing a supercharger). It won't add any hp but it will help your acceleration a lot. No bolt-ons are really going to add much hp to a v6 engine, so if you want something you really notice but don't want to do a supercharger or nitrous then gears are your best bet.
|
4.10's+T-Lock+SCT Xcal Tuner.
|
Alright thanks, I'll start looking for those now.
|
Does anyone have a link to where i can find a T lock for my 2000 v6 mustang? I can't find any.
|
http://www.stangmods.com/V6-Mustang-...1-m4204c75.htm they have gear kits as well that come with the gears and tlocs. AmericanMuscle is going to sell tloc's for the 7.5 rear end except they don't carry them yet. Not sure how long it will be until they do
|
yep, gears & tlock would be an awesome start. Remember you will also need a tune afterwards to adjust your speedo for the new gear ratio.
|
What do you mean by tune? Do I have to buy something? or can I just take it in somewhere? Do you have anymore information on that? thanks.
|
tune as in u would need to recal ur speed and wat not, buy the sct cal 3 form AM.com
http://www.americanmuscle.com/sct-x3...ash-tuner.html tuner is another good mod but ya for sure get gears " for yall other guy's but am wondering if stangmods.com will give u the tune" cuz whenever u buy the gears from AM.com they will give u the free tune this is were am buying my stuff from gears http://www.americanmuscle.com/v6gears.html t-lok http://www.chipsv6specialties.com/c75tr719.html bearing kit http://www.americanmuscle.com/rearendrebuild1.html 3 quartz of Gear oil http://www.americanmuscle.com/royal-...-gear-oil.html |
Ok, thanks. And 4.10's are the way to go? whats the difference between those and 3.73's?
|
so it will be probaly less than 1200.00 for gears, t-lok, bearing kit, gear oil, tuner, and to have the gears installed
gears - 159.99 tlok - 197.87 gear oil - 32.97 bearing kit - 74.99 the get the gears installed - about or less than 300 should be no more than 3 bills tuner - 379.99 |
the higher u go the more acceleration u get from take off, but 3.73 for standard and 4.10 for auto but sum peps get 4.10 gears every though they have a standard
never fear the gears |
you don't have to get a tuner you can also get a speed cal to fix your speedo which is sold my dallasmustang.com. It's much cheaper than a tuner but with a tuner there are many more improvements. So it really just depends on your situation and how much you want to spend.
|
i would get the tuner :D
get the tuner get the tuner get the tuner :D |
Originally Posted by Dave04Mustang
(Post 343547)
you don't have to get a tuner you can also get a speed cal to fix your speedo which is sold my dallasmustang.com. It's much cheaper than a tuner but with a tuner there are many more improvements. So it really just depends on your situation and how much you want to spend.
|
With the tuner, if I mess something up is there a way to return to stock? And is it really worth it? what can I expect to see with a tuner?
By the way, i don't know if this shoiuld effect my buy, but my shifter and clutch might be different than stock. This is my first manual car so the only other experience driving maunal is from my friends car (not mustang). His clutch only goes down like 2 inches where mine is like 12, i think about halfway is the grab point. Also my shifter seems to have to be pushed further, I had a little trouble driving his since it was so different than mine. Will I be able to shift fast enough for 4.10s? |
Me again, i just have about enough money to go ahead and buy it all and figured out my previous question. I was reading today about the t-loc, whats Ford Racing Friction Modifier and do i need to buy it? also do i need to buy the gear oil if im having them instaled at a shop?
Thanks, Ralo |
i believe some gear oil has that in it already. all did was took my t-lock, gears, gear oil, and the install kit to the shop and they had no problem and only charged me $150.
|
All times are GMT -7. The time now is 06:53 PM. |
© 2024 MH Sub I, LLC dba Internet Brands