Mustang Boards

Mustang Boards (/)
-   V6 Tech Forums (https://mustangboards.com/v6-tech-forums/)
-   -   How much boost before she blows? (https://mustangboards.com/v6-tech-forums/1121-how-much-boost-before-she-blows.html)

04 3.9 Mustang 02-23-2005 01:26 PM

How much boost before she blows?
 
I have a 2004 3.9 and want to know how much intercooled supercharged PSI the motor can take? Engine condition is like new but about 17,000 miles on the ticker. Also I'll be using a Eaton M90. Would 38# injectors work or should I go with 42#? and who in colorado can tune the computer to work with these mods?

ThePunisher 02-25-2005 06:48 PM


Originally Posted by 04 3.9 Mustang
I have a 2004 3.9 and want to know how much intercooled supercharged PSI the motor can take? Engine condition is like new but about 17,000 miles on the ticker. Also I'll be using a Eaton M90. Would 38# injectors work or should I go with 42#? and who in colorado can tune the computer to work with these mods?

This might be conservative to some but I wouldnt go over 8psi on a stock motor. Not sure about a tuner in Col.

tedinde 02-25-2005 10:11 PM

did you do the mod yourself and it's running. Got some pics?? Sweet setup, cheap for insurance, good on gas, and V8 power when you need it. It should probably take more than 8lbs if it's intercooled. I had a super coupe before and used to push 12lbs through it no problem. The wife blew the head gaskets after putting some 87 octane in it. I had the heads oringed. and head studs and upped the boost to 15lbs and drove it for 2 years before i sold it back in the late 1980's.

it's all up to the tune on the question 'HOW MUCH BOOST TILL SHE BLOWS"!!!

Scott02GT 02-27-2005 09:23 PM

Do you have a v6?, I think you mean 3.8. I wouldn't reun no more than 8 pounds thru that stock engine

spike_africa 02-28-2005 07:26 AM


Originally Posted by Scott02GT
Do you have a v6?, I think you mean 3.8. I wouldn't reun no more than 8 pounds thru that stock engine

on the 3.8 with stock block and a good tune 14psi is max. but this is pushing it i would hold it off around 12

Scott02GT 02-28-2005 09:02 AM

I wouldn't, if you want the engine to last a normal life, 8 pounds would be my max, if you want to rebuild it in a year or two, then by all means, have fun.

TayWolf55 02-28-2005 04:44 PM

11 PSI is max for a v6 mustang with a stock bottom end. 8 psi is probably better, but with a good tune 11 will be fine.

Make sure you check 3.8mustang.com - lots of good information there... I've personally been a member for almost 2 years now.

spike_africa 02-28-2005 07:00 PM

That site sucks deek for information v6power.net is way better.

And again i am telling you it will be fine with 12#'s

My freind ha sa 94 with a 2000 split port headed motor and a ati kicking 12.5 pounds its quick needless to say and runs well.

TayWolf55 02-28-2005 07:12 PM


Originally Posted by spike_africa
That site sucks deek for information v6power.net is way better.

And again i am telling you it will be fine with 12#'s

My freind ha sa 94 with a 2000 split port headed motor and a ati kicking 12.5 pounds its quick needless to say and runs well.

12+ pounds is pushing your luck but with a good tune its possible. I personally wouldnt do it... i would stick with 11 using the procharger setup.

spike_africa 03-01-2005 07:29 AM

that the kit he has it shows 12.5 or so on the 1-2 2-3 shift :)


All times are GMT -7. The time now is 05:52 PM.


© 2024 MH Sub I, LLC dba Internet Brands