getting 315's soon
im getting rear 17x10.5 03 cobras with 315/35/17 goodyear F1 GS-D3 tires, car is 02 gt will i need to get anything else for this to work? car is lowered with H&R supersports... will i have any problem with rubbing or anything with this setup? ordering soon for the summer..
|
You should be fine.
|
if it rubs, itll be on the quad shock or your catback
|
Originally Posted by MattJ
(Post 251442)
if it rubs, itll be on the quad shock or your catback
|
Originally Posted by Stan
(Post 251444)
i know how to fix the catback issue if it rubs but what can i do if its the shock issue?
|
lance when you had your old gt what tire size your run out back?
|
Originally Posted by Stan
(Post 251448)
lance when you had your old gt what tire size your run out back?
|
Originally Posted by Lances03SVT
(Post 251456)
They were only 285/35/18's.
|
Alot of people run 315's with no problem's.Hell if I can get them on my Cobra you should be able to on your GT.
|
I run 315's with no rubbing. I have the Bullet suspension which is a bit higher then yours, but you should be fine.
|
You're going to get a lot of grip with that wide a tire, is the rest of your drive train ready for that? Also, you might want to weld in your boxes, and add subframe bracing to start with.
|
If the tires rub on tha quad then you can turn it 180 degrees and that should give your tires a bit more room, and yeah 315's and stock clutch's dont mix lol
|
I run 315's with H&R Race springs and have no rubbing at all. even when I still had the quad's on.
Ive not heard of 315 tires having too much grip for a stock clutch. I do have my TQ boxes welded and SFC's though. |
shouldn't have any problems as far as rubbing because its lowered.. those are the same height as your stock tires I do believe.
|
just dont try and do a burnout at tha drag strip. but im sure it was time for that clutch to go anyways:Woot:
|
All times are GMT -7. The time now is 09:35 AM. |
© 2024 MH Sub I, LLC dba Internet Brands