Time for suspension
 

Well I figure since I am about to get my car back within the next 2-3 weeks, I will be in need of some suspension mods.

I currently have mach 1 shocks/struts, MM caster camber plates, and H&R Sport Springs.

I am already plan on getting MM subframe connectors, but whatelse do you reccomend as far as planting the power to the ground.

You need better upper and lower control arms for sure.

after the subframe connectors, some control arms and a bump steer kit should really finish up that suspension.

Maximum Motorsports solid steering rack bushings. Good bang for the buck at $45 and goes a long way to improve steering feel. Panhard bar does tons to improve the side to side wagging movement of the rear end but requires a bit or work to install.

okay so upper/lower control arms, sfc's, and pranhad bar will be next for the mods then =D thanks guys.

If you're going the panhard bar, DO NOT get uppers, otherwise you will cause bind. There's a reason why MM specifically states to not use anything other than stock for use w/ a panhard bar.