removing the isolators
I want to remove the front isolators and maybe the rear ones too, to lower it a bit more. Is it pretty simple to pop them out and how do i go about doing so. I know it will be a tad bit rougher ride but i dont drive it enough to really care about that.
|
I'm interested too. How much lower would it be?
|
i have pics to show you how much lower it makes it. jsut a sec and i'll post them.
|
8 Attachment(s)
Before: without the H&R SS Springs
Attachment 21419 With the H&R SS Springs in w/all Iso's: Attachment 21420 With the H&R SS Springs in with Front Iso's Out: Attachment 21421 Attachment 21422 With H&R SS Springs with Front and Rear Iso's(top and bottom) Out how it sits now: Attachment 21423 Attachment 21424 Attachment 21425 Attachment 21426 |
Wow! How'd you get em out? Take long? Could you do it on stock springs?
|
ha, the first time i did the springs was the first time i even did any suspension work. i did the springs, shocks&struts, Caster Camber Plates, and the Steeda HD rear sway bar. shop told me it was 700 bucks to have the mdo it. i said F that how hard could it possibly be? well it was challenging but i got i was pretty confident and got it done :D . took me a couple days but hey, it was a learning experince and such. i read up asmuch as i could before i did it and got the job done :). the last time i did the front springs was when i tookout the bottom iso's and it took me 30mins to do both sides with just basic handtools and jackstands and a floor jack. when i tookout the back top and bottom ones it was a bit complicated but it didnt take over 40-50mins to get the job done.
|
so its a pretty straight forward project. Did you notice a difference in ride quality or anything?
|
well i alos installed rear sway bar, shocks n struts and C/C plates. but after all the iso's were out the ride was a little righer but not that much really.
|
Originally Posted by V6_Mustang_Power
(Post 347726)
well i alos installed rear sway bar, shocks n struts and C/C plates. but after all the iso's were out the ride was a little righer but not that much really.
|
v6 power- think you could summarize what the steps were to removing the spring and spring isolators? Do the brakes need to be removed as well? im a noob at it so i wanna be prepared lol
|
do you have stock springs? lol. just wondering. but if you look at the AM site @the installs, look at the H&R SS Spring install. i followed that and that's how you do it.
|
Originally Posted by V6_Mustang_Power
(Post 347783)
do you have stock springs? lol. just wondering. but if you look at the AM site @the installs, look at the H&R SS Spring install. i followed that and that's how you do it.
|
All times are GMT -7. The time now is 11:43 AM. |
© 2024 MH Sub I, LLC dba Internet Brands