Foggy headlights
The headlights on my Stang are quite foggy. I was talking to some people at work who work a lot on their cars (4 of them, all 4 drive Honda Preludes) and they said I could get something from Auto Zone called by maguires. Some sort of headlight cleaner. Someone said they had been using it every day for 2 weeks and it is just now starting to look better. Has anyone used this or anything like it? Or should i just shill out the $199 for smoked clear corner headlights?
|
if u have the 99/00 chrome lights or whatever the stock ones are, the shit usually doesnt come clean.. i tried with mine for awhile and just got new lights
|
here is a write up on how to fix them: http://www.3.8mustang.com/forum/show...ht+restoration
however sometimes in the long run your better off just buying new ones |
Its fairly easy to clean up the headlights. It takes some wet sanding and polishing. That is a fine write up, but I wouldnt start with 600 grit. Start with something lighter and if that doesnt work, then go to something more aggressive. The stuff from Meguiars is Plast X, looks like thats what the guy who did that write up used also.
|
were in the same boat :( . im just ordering new headlights this week.
|
i tryed to fix mine, but if there foggy on both sides of the of the plastic if wont work.
|
Originally Posted by 3.8for the win
(Post 317102)
i tryed to fix mine, but if there foggy on both sides of the of the plastic if wont work.
|
New headlights FTW
|
Originally Posted by Lazerred6
(Post 317110)
New headlights FTW
|
Okay this weekend I am going to try and wet sand them myself, see how they look. And if I need to I will get some new ones. Thanks for the advice everyone! I just joined here and already have learned more in the few days than I have in years beforehand.
|
3 Attachment(s)
I wetsanded and polished my friend's headlights on his passatt last week. Used Meguiar's Plast-x to polish.
Attachment 22967 http://i3.photobucket.com/albums/y68...odetail/h4.jpg Attachment 22968 Attachment 22969 started with 800 grit. |
Did you do yours by hand or with a polisher/sander? If I need the tools I can probably hit up my Uncles body shop.
|
That's a big improvement on that Passatt, good job. I did mine by hand, but I would have liked to try using a polisher or something.
|
Did it by hand
and thanks |
wow those vdub lights look a lot better
|
+1 did a great job on those pcola
|
Got my new headlights a few weeks ago and they look great. Try this place online, they accept paypal too. Fast shipping also.. I paid about $135.00. ;)
http://www.1aauto.com/ |
Originally Posted by rebelyell
(Post 317364)
Got my new headlights a few weeks ago and they look great. Try this place online, they accept paypal too. Fast shipping also.. I paid about $135.00. ;)
http://www.1aauto.com/ |
at work we used 1500 grit sand paper to wet sand then rubbing compound with a buffing wheel on a drill then use polish and a foam wheel to finish. comes out great.
|
Originally Posted by V6_Mustang_Power
(Post 317373)
eh, i dont like em.
http://images.1aauto.com/LHP/1ALHP00019.jpg |
you said 135 :/ it says 132+17shipping
|
nvm.. 150 shipped. but eh still a good price. how fast was shipping? they look good?
|
I just went and bought myself some masking tape, 800-1000-1500 grit wetanddry sandpaper, and some PlastX to polish them with when I am done. I will do this tomorrow, obviously take pictures of the before and after. Will a polyfiber towel be okay to apply the PlastX? And I think someone said to make sure to apply a clear coat when I am done with the job, what brand should I be looking to buy?
And for someone who has done this. How long did you spend sanding with each grit of sandpaper? |
About 5-10 minutes with each piece of sand paper, I used a microfiber-applicator to apply and work in the plast-x, and spent a good 20 minutes working the polish in.
|
Did you just use the PlastX or did you spray a clear coat over that?
|
n ot to hi-jack the thread but im also interesed in doign this. so all i'll need is 800-1000-1500 wet or dry sandpaper? whats the differentce between them? do you pour water on em to make it wet? lol but after im done all i need to do is polish it with plastx?
|
Originally Posted by Crimsonred02
(Post 317582)
Did you just use the PlastX or did you spray a clear coat over that?
|
Originally Posted by V6_Mustang_Power
(Post 317584)
n ot to hi-jack the thread but im also interesed in doign this. so all i'll need is 800-1000-1500 wet or dry sandpaper? whats the differentce between them? do you pour water on em to make it wet? lol but after im done all i need to do is polish it with plastx?
|
lol alright, thank you :)
|
It's best to keep flowing water over the light while your sanding.
|
All times are GMT -7. The time now is 07:46 AM. |
© 2024 MH Sub I, LLC dba Internet Brands