Anyone with component speakers?
 

Anyone with pictures of aftermarket component speakers on the doors or at the kick panel?

Completely nasty looking interior.. lol But you should get the point, this is a picture of the Infinity's in the door, the door panel covered them fine.

http://www.sn95forums.com/hosting/us...akerindoor.jpg

How much of an improvement over the stock stuff?

Well, yeah. Mine was MUCH better than stock, but I had some added power.

Stereo:
Panasonic Head Unit
Audiobahn 800w Mono Block
Infinity 7540a 520wX4 Component Amp
-Infinity Kappa 572.5cf Component Speakers/Tweets
Infinity Kappa 12d VQ 12" Sub
Custom 2.25Cu.' Ported Box

What ya thinking about doin'?

I heard the MB Quart Components are GREAT.. might want to check into that..

I just purchased my subs and amp.. (i haven't gone to my buddies to see what sorta amp hes got for me, he just got a vendors license or w/e it is..so he gets stuff dirt cheap and sells it to me :D)

But.. 3 JL 10s


And then I'll be going with MB Quart components

Kenwood Touch Screen

Pics will come after the install is finished

I'm pretty sure there are a ton of pics when I got my stuff installed. Look under screen name and find the thread.

I have TMA 2-way component sets all the way around. 5.25 mids in the doors and tweeters replacing the factory ones. I used plastic adapter plates to convert the stock size to 5.25. The crossovers are mounted uner the dash in the front, and in the rear they are mounted inside the speaker enclosure. All JL audio wiring, bypassing the stock amps, and run directly to a sony headunit. ALOT cleaner sounding with no distortion. It was worth it, but it needs a good 4-channel amp now....

I have 6.5 Boston Pros in the front. They come with adaptor plates so I was able to fit them in there.

I have some MB Quart 6x8 components in the front. The speakers fit perfectly in the door and I just mounted the tweeters on the grill that covers the stock tweeters. I also pulled out all the stock Mach 460 stuff though.