My Mods&Pics.
 

someone said to post up daytime pics of the stang so here it is... just a few pics :) . i just orderd the 232 badges for the fenders(both sides) and black bumper inserts and 8" antenna. plus my GT rear bumper will be here in a few hours. + i know it needs tinted i made an appoitment to take it in and get 20% all around tomorrow morning. next mod will be just headlights then im done for the summer(maybe :D)

Attachment 22960
Attachment 22961
Attachment 22962
yeah, i took the dealer sticker off. i need goooooo gone! lol
Attachment 22963
Attachment 22964
Attachment 22965

looking good, that GT bumper will look good. and the tint will do wonders


and woo hoo! for my 1000th post :cool:

looks good about time you got some daytime pics haha. I always think daytime looks better unless you really know what your doing with camera settings. Looks good post up some pics after you get the tint done. Thats tomorrow right?

lookin nice.
how easy was the gt hood scoop.... interested in doing

Thank you and yeah it will and i hope the tint looks good.

thank you and yeah lol and yepp tomorrow morning as early as i can get it in to the window shop. and yepp i'll post pics of that and the new bumper :)

i dunno lol the shop installed it. i bought it from an online auto place for $175 shipped and they painted it and put it on for $120.

sooo i got the bumper on. did it myself. heres how it turned out... i need to do the exhaust hangers though so yeah.. that will be later down the road. so heres the pics(half-ass) V6 Rear Bumper to GT Rear Bumper

went from this- (notice the big hole in the side of the bumper lol.)
Attachment 22956

to this:
Attachment 22957
Attachment 22958
Attachment 22959
yes i know the corner of my trunk is F'ed up and the tailight panel.. getting it fixed pretty soon :)

Hrm the bumper looks a little slanted unless its the camera. There is a much bigger gap between the trunk on the right than on the left. IMO i would chop off the tips and put on some SS tips. Glad you finally got your bumper though haha :D

...bumper looks nice and straight to me.

im missing a bolt on that side for the bumper and thanks. and thanks crimsonred02

That is one of the nicest 6'ers I have seen. To be honest, I would not do much more to it.

thank you. but the only thing more apperance wise im going to do is shorty antenna, black bumper inserts and the 232 badges on the fenders(orderd all these already), and tint and then later lower it.

btw, i was P*ssed today, :mad: when i made an apoitment to get my windows tinting they told me to bring it in friday whenever i can in the morning. well they called and said that i didnt bring it in before 8 and they started on someone elses. told me to bring it in next wednesday(i have an oil change apotment then lol) so im moving the oil change to mon or tuesday.

dude you do not need to be paying someone else to change the oil on your car, let alone making an Appointment to do it. I'm no mechanic and it takes me all of about 15 minutes to change my oil.

i prefer to do my oil as well..... but i have a warranty.. maybe he does too
:-/ *shrugs*

if i knew how i would. help me? :D advice?

its not hard but its awkward...i prefer to pay 20 bucks than have to find a way to get rid of the oil and get under my car....
dude i've been staring at the pics and i cant begin to see how that bumper is crooked

go to wal-mart and buy the motorcraft filter your car takes and your choice of oil. Get the car up with either ramps or jacks. make sure you put jackstands down too for safety. I like to run the engine for a minute or so so the oil can warm up a little. (don't run the engine long though cause the oil heats up quick) Find the oil pan under the engine. remove the drain bolt (remove the fill cap up top too so the oil will flow out faster) and drain out the old oil into your drain pan. Remove the old filter, making sure the old gasket comes with. (sometimes i use a piece of sandpaper for grip if the old filter doesn't wanna come off) I like to fill the new filter before i put it on, although I'm not sure if this is necessary (i noticed before i was getting a spike in the oil pressure after changing it) Use a little bit of oil to lube the gasket on the new filter before putting it on. once the new filter makes contact, you go another half turn. You shouldn't even need tools to get the old filter off or put the new one on. replace the drain bolt and fill the car with however many quarts the 3.8 takes (the manual will say) Replace the fill cap, and drive away glad you just saved some money on something so simple.

Edit to address streetracers point: To get rid of the old oil just take it to an autozone, they take it for free

I think i covered most of it, someone else can feel free to point out anything i might have missed

looks pretty good, nice choice of wheels ;)

ok everyone just ignore my comment about the bumper possibly being slanted lol. The car looks great. Just brought it up because its important for a bumper to be installed correctly since its for safety and on my screen this picture made it look a little slanted its probably just my eyes. I just looked at the bumper/trunk line and saw that the space between the trunk and bumper seemed to get larger as you move to the passenger side of the car. I take it back though lol its probably just the lighting.

time to raise those tips up :P

yeah, i'll be doing that sometiem this weekend :)

Nice dude, I'm diggin the yellow.

thank ya. :)

its gonna look great once you get the tips raised. What size are those?

yepp and 2.5" they only need to be raised about 2 or 5" each. the pics make it look horrible lol.

i didnt know they made 4x4 mustangs!!!

lol good looking V6 so far! i think its about time u find a use for those nittos! performance NOW!

sick ride... yellow FTW

thank you and here are a few pics of the bumper/bumperinserts/shorty antenna.(put the inserts&Antenna on today) :D. had to re-schedule the tint job. taking it in this wednesday to get 20% all around.

yeah the tips need to be redone so it looks good and i have the 232 badges to put on. not sure where im gonna put them. was thinking of taking off the poney emblems on the fenders and putting the 232 badges on each side(i have 2 of them) then i was thinking of just using 1 of em and remove the Ford emblem on the trunk and putting the 232 there. any ideas where to put them? both on fenders or 1 on trunk(after taking the ford one off) ? btw, i didnt washer it or anything

Attachment 22926
Attachment 22927

Attachment 22928
Attachment 22929

this thread is now to show updated pics of Stang and so on that concerns my Stang! :D

hell they might as well give you your own sticky....... :cool:

Ha. yeah