Parts list for '00 GT
 

Randy,
Putting the new motor together and i need some parts.

I need:
- Timing Chains
- Guides
- Tensioners (they're steel correct?)
- head gaskets
- intake gasket
- timing cover gaskets
- oil pan gasket
- water pump gasket
- crank trigger wheel (the pressed steel one 01+ i think)
- one piece crank gear (01+ again, i think)
- Romeo cam gears, spacers, and bolts

Do you see anything i might be forgetting?

I'm using the M-6010-A46SC block with windsor heads and the timing cover off my 2000 GT if it matters.

I've got a fax number if you want to fax the list with part numbers and price w/ shipping (85043).

Thanks

I'll work on this tonight, whats your fax #?

602-484-9733

Thanks
Jesse

ok, now what about block and cover dowels and the hardware to install things like tensioners and guides?

block dowels?

Would i be able to use the cover dowels and bolts from the old motor?

I guess the hardware for the tensioners and guides could be useful. :D
God this is going to get expensive.

as far as I know the new blocks dont come wth any hardware and it would be almost impossible to remove the old dowels....... sending a fax over..................now.

So how much would shipping cost?

How much of this do you have in stock?

everything wth a Bin # is or should be "in-stock" anything that says "SPORD" has tobe special ordered, which could be a day or 2 toget....shipping on the above to you is @$20.00

Randy, i've got a couple more things i need a price/part number for.

Valve cover bolts (windsor)
intake bolts (to mount to the heads)
the long thermostat bolts

and what was the part number for the spacers for the romeo cam gears?

You can fax me at the same number, 602-484-9733, or post here.

Thanks again.

the cam spacers were the F3AZ-6265-A, I'll work up another quote for the bolts inna' few

24 of the N806183-S437? What are the two extra bolts for? Only 11 bolts per side for the valve covers right?

Romeo heads have 11 on each side, Windsor heads have 13 & 14 bolts and Ford only sells the bolts in packs of 3;) looks like my math sucks too, you'll need 9 packs of 3:D