Mustang Boards

Mustang Boards (/)
-   Modular 4.6L Tech (https://mustangboards.com/modular-4-6l-tech/)
-   -   Headers for 01 Cobra (https://mustangboards.com/modular-4-6l-tech/35718-headers-01-cobra.html)

Cobra 01 04-09-2009 09:09 AM

Headers for 01 Cobra
 
Hey,
I am looking for a upgrade for my exhaust, I stumbled across the Cobra loudmouth exhaust from SLP. I think it should be a good buy (Please correct me if wrong). But I also want to replace the headers at the same time. So does anyone know of a good set of headers that would work with the midpipe I am thinking about?
Also, if it turns out that I have missed the fact that Loudmouth is bad, and you know a better set up for exhasut, please post it, I would like to know. But it has to has a good sound, I dont want no quite system, Muscle all the way baby!

Thanks in advance.

jjtgiants 04-09-2009 09:18 AM

SLP makes quality stuff, but you should listen to some exhaust clips before purchasing them. SLP loudmouth's are ear piercing loud, especially with a mid-pipe and headers.

00blkstanggt 04-09-2009 11:02 AM

SLP is very raspy and crackly. I personally don't like the sound of them, but you should listen to all different types of exhaust for yourself and see what you like. Everyone on here will have their own personal opinion. If you click on the link in my sig, it will have a video of what my car sounds like with long tube headers, o/r x-pipe and flowmaster mufflers. Hope that helps and welcome.

bassman97 04-09-2009 11:55 AM

If you want long tubes, Kooks, Hooker/Flowtech, and BBK I know make 4V headers. Not sure on SLP and Mac. Shorties you're limited to FRPP, BBK, and JBA. Mid-lengths you got Bassani and JBA. Personally, I wouldn't both w/ shorties.

Also, the Loudmouth isn't a mid-pipe, it's the cat-back exhaust portion (hence the term cat-back). Mid-pipes depend on the brand of headers you want. Shorties use stock style mid-pipes while mid-lengths and long tubes use a shorty mid-pipe (get one from the same company as the headers to avoid fitiment problems).

Cobra 01 04-09-2009 01:57 PM

Thanks, so if it is just an extension, what else do I need to buy, or will it just work with and replace some stock parts. Also, the only headers on their site are off road only, which I guess means that they are too loud. Thanks for the help so far though.

JohnnySVT 04-09-2009 02:22 PM

off road means it wont pass emissions. when purchasing a mid pipe if it says off road or o/r for abreviation it simply means it doesnt have catalytic converters and you wont pass emissions. it doesnt matter if your state doesnt do emissions testing.

btw i have stock manifolds and a bbk o/r hpipe with flowmasters and it is nice and deep and loud bc i have them dumped.

something to remember hpipes will give you a deep rumble while xpipes will give you a more raspy high pitched tone.

96blackgt54 04-10-2009 06:39 AM

Anything you get will make it "sound like a Mustang".

It's hard to be diffrent.

r3dn3ck 04-10-2009 07:13 AM

there's a set of cobra longtubes on the SF bay area craigslist for hella cheap with x pipe.

blownstang 04-11-2009 12:02 PM

American Racing Headers longtubes with catted x pipe. All stainless steel, best fitment, and best quality. Catback of your choice. I personally hate SLP. Makes the car sound like an old rusted out pickup truck. I would recommend a JBA, Mac, Bassani, or Borla catback. My setup is ARH longtubes, catted x pipe, and JBA catback and I love it. The whole exhaust is stainless steel, fits perfectly, and the quality could not be better.

Cobra 01 04-12-2009 02:10 PM

Hey guys, thanks for the help, I think I know what I need to now. Of coarse if there is anything else you want to add, feel free.

Thanks

FoxRodder 04-12-2009 03:20 PM

A guy I used to work with had a 99-2000 Mustang GT dead stock except that it had a loudmouth catback. I don't understand how the car could be so loud and crappy sounding with just that catback but it sure did. I think those loudmouth catbacks are basically almost a straight pipe and that one sounded terrible in my opinion. He hit the gas and passed me one day on the street when I didnt know he was there and I thought some piece of crap truck was going by until I saw him.

Now other people seem to think that SLP makes good quality parts but the sound of their loudmouth catback is just awful. Another brand of mufflers I'll stay away from is Pypes. They seem to make good quality stuff too but I heard a 5.0 with their catback and it also sounded like a raggedy pickup truck with rust holes in the exhaust.

Cobra 01 04-13-2009 06:08 AM

So I have a new proposition, tell me what you think. BBK long tube headers and matching catted H pipe. I have heard the rule is H=lower more of a rumble sound. And that is what I was gunning for. So, tell me what you guys think, maybe you know someone with it on and you like it or don't.

Thanks

blownstang 04-13-2009 03:32 PM

The catback will decide how the car will sound. First pick a catback you like and then match it to headers and x/h pipe. Alot of people have and like BBK. For the price they are good. I would've gone with BBK if I didn't win my headers and x pipe.

FoxRodder 04-13-2009 07:51 PM

Take a look on youtube because a zillion mustang owners video record the sound of their exhaust systems with different components. I'm new to the 4.6 cars but between my two 5.0s I had a longtube/H pipe setup on one, and the other had shorties with an X pipe. Both cars had the same exact magnaflow catback and the one with longtubes/H pipe was way meaner sounding and was louder. So thats why I suggest you listen on youtube to as many combinations as you can.

spike_africa 04-13-2009 08:40 PM

Friend has BBK long tubes, o/r H-pipe and Mac catback on a 1999 Cobra and it sounds awesome. Its the exhaust setup I would do if I had the car.

Cobra 01 04-15-2009 07:31 AM

Well, now that we have established that when I started this thread that I had idea what I was talking about, but now that I have been educated, I would like to thank you. Here is my final decision, give me you feed back (For the last time I hope).

BBK longtube headers with matching shortty catted H-Pipe and SLP loudmouth tailpipe.

Should match and sound awsome 'eh?

spike_africa 04-15-2009 02:47 PM

Sorry my friends car has the Dynomax Ultraflow catback not Mac. I would strongly suggest against the LM1 but if its what you really want go for it as you are the one who has to drive it.

Cobra 01 04-15-2009 02:50 PM

Okay,
But what would I go with then my only options are LM1, LM2 or Magna Flow.

spike_africa 04-15-2009 02:52 PM

You have way more options then that. Why do you limit yourself to just those?

Here is the Pypes Violator catback: http://www.youtube.com/watch?v=UX8CascYshw
Here is Mac catback: http://www.youtube.com/watch?v=26o6OiWW04c
Here is SLP Loud mouth1: http://www.youtube.com/watch?v=bCdWtVJP5iM

There are many other options out there too. Like the Ford racing M55 catback which is super loud. Found here: http://www.youtube.com/watch?v=a8OCvb0pFWM

Cobra 01 04-15-2009 02:58 PM

On the website, there are only three catbacks for a 2001 cobra

spike_africa 04-15-2009 03:01 PM

AM.com doesn't sell every part there is for our cars.

bassman97 04-15-2009 04:14 PM

You could always order it, install, and if you don't like it, have an exhaust shop swap out mufflers for you.


All times are GMT -7. The time now is 06:18 PM.


© 2024 MH Sub I, LLC dba Internet Brands